On my Anilam converted BP Series 1 knee mill all the wires to the servos
run in one flex conduit. The power wires are ordinary MTW wire, I would
have to look to see what the resolver and encoder wires are (I'm not
near the machine atm).
John
On 11/13/2011 4:06 PM, Bruce Klawiter wrote:
> I am
Bruce Klawiter wrote:
> I am adding 5000 count Heidenhain rotary encoders to the servo motors on my
> mill.
> The conduit that goes from the servo motor to the control box that holds the
> power and tach wiring, can I run the encoder wiring in that conduit.
> Would the power or tach wiring inter
I wouldn't run encoder wiring in the same conduit as power wiring. Most
encoder wiring is at a 0 to 5 volt level, and could easily pick up noise from
the power or tach wiring which could mean extra or mixed counts. I would also
have the tach wiring and encoder wiring run with shielded cable,
