Re: [Emc-users] eBay links Re: More on er-20 stuffs

On Thursday 10 May 2018 23:54:35 Gregg Eshelman via Emc-users wrote: > Report that security hole to eBay. Have you ever tried to deal with ebay security? Waste of time. Even if you get a human, their way is right and the only way. BTDT even GTTS. > The site should check for an > authorization

Re: [Emc-users] More on er-20 stuffs

On Thursday 10 May 2018 22:23:56 Erik Christiansen wrote: > On 10.05.18 19:02, Gene Heskett wrote: > > Anyway, I've made a box that can corral 100 of the "tap hats", all > > of which now have a 4mm cap screw in the side, whose head matches > > the slot I cut in the lip of the 7/8" R8's. So that

[Emc-users] eBay links Re: More on er-20 stuffs

Report that security hole to eBay. The site should check for an authorization cookie etc and if not found,, don't load the site with your account logged in. On Thursday, May 10, 2018, 6:16:17 PM MDT, Gene Heskett wrote: On Thursday 10 May 2018 07:22:40 Gene

Re: [Emc-users] 7i90 not listed in pnc

Manual in hand, trying this, and I'm here. svts.jpg How do I get access to this extracted bitfile? -- Check out the vibrant tech

Re: [Emc-users] 7i90 not listed in pnc

-- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list

Re: [Emc-users] 7i90 not listed in pnc

First order of business is probably the mesaflash session. Get, from the mesanet site, 7i90.zip. I unziped it to the Public subdir in my home directory, which will give you a 7i90 directory. cd 7i90/configs/hostmot2$, and an ls will show you quite a lengthy list of files. There ought to be a

Re: [Emc-users] More on er-20 stuffs

On 10.05.18 19:02, Gene Heskett wrote: > Anyway, I've made a box that can corral 100 of the "tap hats", all of > which now have a 4mm cap screw in the side, whose head matches the slot > I cut in the lip of the 7/8" R8's. So that problem is partially > addressed. That's one R8 collet for each

Re: [Emc-users] 7i90 not listed in pnc

On Thu, 10 May 2018, jeremy youngs wrote: Date: Thu, 10 May 2018 20:32:24 -0500 From: jeremy youngs Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re:

Re: [Emc-users] 7i90 not listed in pnc

On Thursday 10 May 2018 21:32:24 jeremy youngs wrote: > what file, .jpg > w?usp=drivesdk> 1st is transport layer. Second is trying to get 7i9) > bit file loaded. The path is correct and the file is in that location. > Any

Re: [Emc-users] 7i90 not listed in pnc

what file, .jpg 1st is transport layer. Second is trying to get 7i9) bit file loaded. The path is correct and the file is in that location. Any suggestions?

Re: [Emc-users] More on er-20 stuffs

On Thursday 10 May 2018 07:22:40 Gene Heskett wrote: The following msg contains private info that has already allowed another person to log into my ebay account with the potential of doing anything I might do. Its the several line long link to a purchase I made, and should never have become

Re: [Emc-users] Zeiss touch probes

Actually the Renishaw design doesn't work that well due to lobeing issues. That is, the break point differs due to the angle of the kinematic support with respect to the approach to the object being measured. That is the reason for the superiority of the Zeiss design. > -Original

Re: [Emc-users] More on er-20 stuffs

On Thursday 10 May 2018 17:24:41 Gregg Eshelman via Emc-users wrote: > To use those with a TTS or other 3/4" R8 (or 4C) collet you'll need > adapter rings. Like these. > https://www.tormach.com/store/index.php?app=ecom=prodshow=32432 > They used to have thinner ones that had to be glued on with

Re: [Emc-users] Zeiss touch probes

On 10 May 2018 at 23:45, Ken Strauss wrote: > I have no definite knowledge of the Zeiss probes but isn't the mechanical > switch just to indicate an Estop condition for serious overtravel? I believe > that there are piezo sensors for the actual probing. There are, but the

Re: [Emc-users] Zeiss touch probes

I have no definite knowledge of the Zeiss probes but isn't the mechanical switch just to indicate an Estop condition for serious overtravel? I believe that there are piezo sensors for the actual probing. > -Original Message- > From: Rene Hopf [mailto:reneh...@mac.com] > Sent: Thursday,

Re: [Emc-users] Zeiss touch probes

On 10 May 2018 at 23:14, Rene Hopf wrote: > beep mode is usually diode mode, and will show you voltage drop and not ohms. Diode mode is a separate setting on this meter. (Fluke 15B+) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the

Re: [Emc-users] Zeiss touch probes

> On 11. May 2018, at 00:29, Andrew wrote: > >> So, working purely as a touch-probe they show 76kΩ when un-triggered >> and 90kΩ when triggered. So I need to find a way to convert that to a >> digital input for LinuxCNC. >> (I may well just ignore the piezo element) the

Re: [Emc-users] Zeiss touch probes

2018-05-11 1:08 GMT+03:00 andy pugh : > > It turns out that the NC contacts are part of a resistor network. > There is a 90k across the contacts and a 470k in series. That was why > my beep-test didn't work (I had not realised that putting my > multimeter in beep mode also

Re: [Emc-users] Zeiss touch probes

> On 11. May 2018, at 00:08, andy pugh wrote: > > (I had not realised that putting my > multimeter in beep mode also locks it in single-ohms mode, so the > display was showing nothing.) beep mode is usually diode mode, and will show you voltage drop and not ohms.

Re: [Emc-users] Zeiss touch probes

On 10 May 2018 at 21:09, Andrew wrote: >> The interface is a 5-ring connector like a jack plug. >> I haven't managed to figure out which ring is which, and Zeiss are not >> saying. > So it must be two NC contacts and the rest for the piezo. Yes, I figured that much out, the

Re: [Emc-users] More on er-20 stuffs

As a Tormach owner I may be able to shed a little light on their TTS holders: Tormach have only made ATC compatible holders (with groove for the gripper) for at least 3 years. I have used some of the thinner TTS adapter rings and found them unsatisfactory. It was difficult to ensure that the rings

Re: [Emc-users] More on er-20 stuffs

To use those with a TTS or other 3/4" R8 (or 4C) collet you'll need adapter rings. Like these. https://www.tormach.com/store/index.php?app=ecom=prodshow=32432 They used to have thinner ones that had to be glued on with epoxy. Looks like they're going (or already have gone) to making only the

Re: [Emc-users] More on er-20 stuffs

On Thursday 10 May 2018 09:27:57 Bengt Sjölund wrote: > Why not go for a proper tool? > > https://www.aliexpress.com/item/J41-Tapping-chuck-J4124-R8/32434340752 >.html > > Cheers > > Bengt 3 reasons, first being the price in the middle of the page, and several of its "tap saving" features would

Re: [Emc-users] Zeiss touch probes

2018-05-10 22:56 GMT+03:00 andy pugh : > Does anyone know how the Zeiss RST-P touch-probes work? As well as the > normal 3-way ball and bars kinematic mount they have a piezo element. > The interface is a 5-ring connector like a jack plug. > I haven't managed to figure out

[Emc-users] Zeiss touch probes

Does anyone know how the Zeiss RST-P touch-probes work? As well as the normal 3-way ball and bars kinematic mount they have a piezo element. The interface is a 5-ring connector like a jack plug. I haven't managed to figure out which ring is which, and Zeiss are not saying. -- atp "A motorcycle

Re: [Emc-users] 7i90 not listed in pnc

Yahoo, Yahoo !!! success.jpg Thank you so much guys !! Now if I'm correct the next thing will be mesaflash the firmware version, then on to building cables and count these encoders so I have good

Re: [Emc-users] More on er-20 stuffs

Gene,   You may want to trim your links down.  I haven't clicked on anything in it, but that link has the login credentials for someone named Maurice. On 05/10/2018 06:22 AM, Gene Heskett wrote:

Re: [Emc-users] More on er-20 stuffs

Why not go for a proper tool? https://www.aliexpress.com/item/J41-Tapping-chuck-J4124-R8/32434340752.html Cheers Bengt Den 2018-05-10 kl. 15:19, skrev Gene Heskett: On Thursday 10 May 2018 08:02:57 andy pugh wrote: On 10 May 2018 at 12:22, Gene Heskett wrote: This

Re: [Emc-users] More on er-20 stuffs

On Thursday 10 May 2018 08:02:57 andy pugh wrote: > On 10 May 2018 at 12:22, Gene Heskett wrote: > > This would, if a 3/4" R8 collet could be found with a D shaped bore, > > be yet another way to remove one potential slip point in trying to > > hold a tap for rigid tapping.

Re: [Emc-users] More on er-20 stuffs

On 10 May 2018 at 12:22, Gene Heskett wrote: > This would, if a 3/4" R8 collet could be found with a D shaped bore, be > yet another way to remove one potential slip point in trying to hold a > tap for rigid tapping. Buy a small-bore R8 collet and have it wire spark-eroded

[Emc-users] More on er-20 stuffs

Greetings; Looking around for some more cheap metric ER-20 stuff, I stumbled over a kit on ebay that had the TTS like adapter as part of the kit. So I bought 2 sets of them. $40 a copy, or $79.something for 2 sets. The adapter looked like it was the std 3/4 diameter stem. But when they