On Tuesday, March 1, 2022 11:21:16 AM EST Peter C. Wallace wrote:
> On Mon, 28 Feb 2022, gene heskett wrote:
> > Date: Mon, 28 Feb 2022 20:11:35 -0500
> > From: gene heskett
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> >
> >
> > To: "Enhanced Machine Controller (EMC)"
> >
On Tue, 1 Mar 2022, Peter Hodgson wrote:
Date: Tue, 1 Mar 2022 22:56:08 +
From: Peter Hodgson
Reply-To: phodg...@uk22.net,
"Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] Is there a better way - G76 for plain bearing lubricating
Den 2022-02-28 kl. 11:47, skrev andrew beck:
Hey guys
I want to issue a m102
And get this code run
S5m3
Halcmd setp hm2 7i77etc pin output on
Motion module have digital outputs.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
I've offered to make some bronze bearings for a vintage British
motorbike club.
The bearings have some helical oil grooves on one half of the inner
diameter.
I thought I could do this with G76 having the pitch twice the length of
the bush.
G0 X15. Z10.
G76 P42.0 Z-25. I0.88 J0.3 K1.0
On Tue, 1 Mar 2022 at 22:59, Peter Hodgson wrote:
> The problem is that the spindle, run via a VFD needs to turn at only 50
> RPM to be able to have enough velocity on the Z stepper to achieve the
> correct pitch and the spindle doesn't seem to be stable enough or have
> enough torque at those
All of them, from those very cheap keyboards Andy found to the best
top-of-the-line Apple glass trackpads, are "plug and play" as long as you
use the USB connection.
On Tue, Mar 1, 2022 at 3:14 PM Martin Dobbins wrote:
> Hi Andy,
>
> Are those reasonably easy to setup?
>
> thanks,
>
> Martin
>
There are options that do not involve replacing a small part.
(1) just add an external low side resister (SMT parts are easy to remove) or
(2) if the pressure sensor is actually a pressure-sensitive resister, then
run it with more than 5 Volts.
On Tue, Mar 1, 2022 at 9:40 AM gene heskett wrote:
Hi Andy,
Are those reasonably easy to setup?
thanks,
Martin
From: andy pugh
On Mon, 28 Feb 2022 at 21:44, Ed wrote:
>
> Title says most of it. For most commands I use the keyboard for the
> speed but changing the tooltable and a couple of other things I
It is easy to install 3.7 First use "python3 -m vend " then
"source /bin/activate" then install the version of
python you like and whatever version of the packages you want. That's it.
Now you have a vertical environment.
In fact, almost every Python developer does this is it is generally a
On Mon, 28 Feb 2022 at 21:44, Ed wrote:
>
> Title says most of it. For most commands I use the keyboard for the
> speed but changing the tooltable and a couple of other things I like to
> use a touchpad.
I use a touchscreen, and then in a holster in the side of the machine
I have an older
On Tuesday, March 1, 2022 11:55:26 AM EST andy pugh wrote:
> On Tue, 1 Mar 2022 at 16:25, Peter C. Wallace wrote:
> > Not with firmware but you could replace the low side resistor network
> > on the first 4 inputs with say 22K (was 1.8K) to get about a 5V full
> > scale range
> Or, less
On Mon, 28 Feb 2022, gene heskett wrote:
Date: Mon, 28 Feb 2022 20:11:35 -0500
From: gene heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Q for Peter?
Greetings Peter;
The 7i76 has, I recall reading, the ability to do
On Tue, 1 Mar 2022 at 16:25, Peter C. Wallace wrote:
> Not with firmware but you could replace the low side resistor network on the
> first 4 inputs with say 22K (was 1.8K) to get about a 5V full scale range
Or, less intrusively, boost the signal with an Op-Amp powered from the
field power?
--
On Tuesday, March 1, 2022 5:56:08 PM EST Peter Hodgson wrote:
> I've offered to make some bronze bearings for a vintage British
> motorbike club.
>
> The bearings have some helical oil grooves on one half of the inner
> diameter.
>
> I thought I could do this with G76 having the pitch twice the
Greetings all;
Any progress on that? The python is too new. Buster is just fine with its
python-3.7, but bullseye has python-3.9.2 and breaks it.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed
15 matches
Mail list logo
