On Thursday 13 December 2018 20:48:35 Erik Christiansen wrote:
> On 11.05.18 14:28, andy pugh wrote:
> ...
>
> > Though, actually, what I would do is cut a slot in the top and rely
> > on two flats only to do the work.
>
> That one appeals a lot from the manufacturing viewpoint. It is quicker
> an
On 11.05.18 14:28, andy pugh wrote:
...
> Though, actually, what I would do is cut a slot in the top and rely on
> two flats only to do the work.
That one appeals a lot from the manufacturing viewpoint. It is quicker
and probably as strong as the 4 grubscrews I used in the original
taphats. It too
On Thu, 13 Dec 2018 at 20:58, yomin estiven jaramillo munera
wrote:
> is genserkins suitable for what i wannna do?
It should be, it is meant to work for any serial robot.
> where can i find information to set genserkins?
This might be all that there is..
http://linuxcnc.org/docs/html/man/man9/
Hi guys, i need a few of your help, i am using genserkins for my arm
manipulator, i am changing the DH parameter definited for PUMA 560 robot
for my own DH parameters, However just changing the DH parameters i am
having errors.
is genserkins suitable for what i wannna do?
where can i find informa
