Hey guys. I have a bit of a strange issue here.
I just put a new touch screen monitor on my cnc today. I have not changed
any ini file stuff or hal files. Just the monitor
before the change everything worked fine and I could see the actual machine
extends on the screen which was quite nice to
As file storage for configuration and others have been discussed. I do not have
internet access in workshop and also have similar problem.
Cloning a git repository on an usb stick might be an option which I tried
today. A little bit complex but it works. Creata a git repository with the
files
On Sat, 2 May 2020 at 16:29, N wrote:
> Did not check check then moving but expect a lot less accuracy then at move,
Bear in mind that when the tool position matters the tool is often
stationary in the important direction.
> Anyone here have any experience what accuracy is required then
Finally got things running well today.
According to scale then moving to point at standstill accuracy is around a few
micrometers for table and a few times more in "Z" direction. This corresponds
to a few encoder pulses for table and a few times more for "Z" direction. Did
not check check then
No worries!
Thanks for replying.
On Sat, May 2, 2020, 9:40 PM Gene Heskett wrote:
> On Saturday 02 May 2020 00:36:33 andrew beck wrote:
>
> > hey gene
> >
> > I have the push pull output standard encoder card not the sin cos
> > encoder card. it is the left diagram in the pdf not the one on
On Saturday 02 May 2020 00:36:33 andrew beck wrote:
> hey gene
>
> I have the push pull output standard encoder card not the sin cos
> encoder card. it is the left diagram in the pdf not the one on the
> right.
>
mmm, left. I saw the cos/sin and never looked at the other. My bad, and
my
> Hi guys just getting back with a report of what I did to try clone my hard
> drive.
>
> I tried to clone it in linuxcnc first as described and failed. then tried
> clone zilla, then tried a few other programs to decrease the size.
Do not think cloning is a good idea since it is an exact
