Mucho thanks everyone for all the help. Ebay looked good but fallback
would be Digikey.
Note: I'm not tight, I just squeak a little when I walk.
Have an order in for 5 in case I need spares.
Dave
On 5/23/22 2:40 PM, gene heskett wrote:
On Monday, 23 May 2022 15:01:15 EDT Rob C wrote:
If
On Monday, 23 May 2022 15:01:15 EDT Rob C wrote:
> If it's the green connector, just search google for 6 pin 5.08 mm screw
> terminal and you will get these sort of hits:
> https://www.amazon.co.uk/dp/B0924QD2T2?tag=amz-mkt-chr-uk-21=
>
On Monday, 23 May 2022 14:58:33 EDT Rob C wrote:
> Is this the green connector plug?
Yes. I gave him the missing cable data, by PM but my plugs were from
fleabay at the time, and unlabled as to a ready part number.
When searching to buy these 3 phase stepper/servo's, make sure the pix of
the
If it's the green connector, just search google for 6 pin 5.08 mm screw
terminal and you will get these sort of hits:
https://www.amazon.co.uk/dp/B0924QD2T2?tag=amz-mkt-chr-uk-21=1ba00-01000-org00-win10-other-smile-uk000-pcomp-feature-scomp-feature-scomp=aa_scomp
Is this the green connector plug?
On Mon, 23 May 2022 at 18:57, andy pugh wrote:
> On Mon, 23 May 2022 at 18:41, dave engvall wrote:
>
> > Can anyone provide a part number, eg. manufacturer or digikey, etc
> > number for the 6 pin encoder cable connector on the LCDA357H controller.
>
> Google
On Mon, 23 May 2022 at 18:41, dave engvall wrote:
> Can anyone provide a part number, eg. manufacturer or digikey, etc
> number for the 6 pin encoder cable connector on the LCDA357H controller.
Google has shown a number of options (including DE-09)
Can you find a photo, and measure the pin
Hi all,
Can anyone provide a part number, eg. manufacturer or digikey, etc
number for the 6 pin encoder cable connector on the LCDA357H controller.
It should be identical to the cable end for the 6 pin connector for
pul+, plu-, etc.
As always I appreciate the help. As I age I seem to need
