On 03/28/2015 04:43 PM, andy pugh wrote:
On 28 March 2015 at 21:44, Gregg Eshelman g_ala...@yahoo.com wrote:
Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC
with the Debian Wheezy LCNC install?
http://buildbot.linuxcnc.org/dists/wheezy/2.6-rt/binary-i386/
That link
Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC
with the Debian Wheezy LCNC install?
I'm setting up a computer with a pair of hard drives, one for Linux and
one for XP.
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
On 28 March 2015 at 21:44, Gregg Eshelman g_ala...@yahoo.com wrote:
Where do I download the update from 2.6.4 to 2.6.7 to sneakernet to a PC
with the Debian Wheezy LCNC install?
http://buildbot.linuxcnc.org/dists/wheezy/2.6-rt/binary-i386/
--
atp
If you can't fix it, you don't own it.
Subject: Re: [Emc-users] 2.6.4---2.5.4
2014-11-23 23:46 GMT+02:00 a k pccncmach...@gmail.com:
i did move 5i20 to the next PCI port and 2.6.5 work ok.
i just do not know what cause to 2.6.5 to start to work ok?
maybe because it use quantum mechanic -- nothing happen for sure, it
only
has
On Mon, 24 Nov 2014, a k wrote:
Date: Mon, 24 Nov 2014 13:29:12 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
2014, a k wrote:
Date: Mon, 24 Nov 2014 13:29:12 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
Hi
-0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
Hi
i am not out of woods- so far.
i did move
On 24 November 2014 at 22:24, a k pccncmach...@gmail.com wrote:
i use live CD 2.6.4 i did not touch any HAL
Then once again you are wasting everyone's time.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
i use 2.6.4 live cd.
i did not touch hal or ini file
//
when i connect y axis motor drive -- system works ok.
when i connected y axis to motor drive axis X or Y -- system works ok.
when i connected X or Z axis to any motor drive system stop work as a
On Mon, 24 Nov 2014, a k wrote:
Date: Mon, 24 Nov 2014 14:59:47 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
On Sat, 22 Nov 2014, a k wrote:
Date: Sat, 22 Nov 2014 16:04:20 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
, 22 Nov 2014, a k wrote:
Date: Sat, 22 Nov 2014 16:04:20 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
(EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this
When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2.
after that i can pick axis like
:
On Sat, 22 Nov 2014, a k wrote:
Date: Sat, 22 Nov 2014 16:04:20 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
Aram
See below
Problem is that when i click F1 - off e-stop, i should be able to pick axis
-- X Y Z, able to type in in MDI , AND after i push F2 machine power up and
after i click on Y axis jog - (any increment ) tham machine should move.
that is
:
Date: Sat, 22 Nov 2014 16:04:20 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this
When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2
-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing
@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this
When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2
@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Subject: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this
When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2
On Sun, 23 Nov 2014, a k wrote:
Date: Sun, 23 Nov 2014 11:12:38 -0800
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
2014-11-23 23:46 GMT+02:00 a k pccncmach...@gmail.com:
i did move 5i20 to the next PCI port and 2.6.5 work ok.
i just do not know what cause to 2.6.5 to start to work ok?
maybe because it use quantum mechanic -- nothing happen for sure, it only
has high probability that it will happen.
I
@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
hi
i try and got same problem with live CD no installation--
even without any installation.
than i try 2.5.4 and total different result.
Problem is that when i click F1
On Sun, 23 Nov 2014, Andrew wrote:
Date: Sun, 23 Nov 2014 23:54:16 +0200
From: Andrew pkm...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 2.6.4---2.5.4
hi
i fund that i have bigger problem.
2.6.4 does not work as 2.5.4
i just check before typing this
When i start 2.5.4 - open CNC (my is 5i20)
than F1, and F2.
after that i can pick axis like X Y Z and pick increment
with 2.6.4 it does not work like that
Here is how it works on my computer
Pick
if computer good to run 2.5.4 than it should be good to run 2.6.4?
so computer type is not an issue ?
copy of my download --binary.hybrid.iso--- has a size --
--1,10 GB (1 187 692 544 bytes)
is this right?
On Sat, Nov 22, 2014 at 4:04 PM, a k pccncmach...@gmail.com wrote:
hi
i fund that i
Hi Aram.
Look at this video http://www.youtube.com/watch?v=lJ00KZ7-PIs from
YouTube .
It's well done and clear so you should understand the installation process
of the LCNC new version.
The same author made other interesting videos on the same argument
(upgrading to the latest version, latency
Hi
i want to install emc2--2.6.4
i down load it from linuxcnc
1st -- is 2.6.4 most current one?
2nd when i down load, it gives options
1install Graphical
2install (text)
3install Fail Safe
question is which one do i need?
i want to it look like 2.5.xxx - not sure how to say it
On 11/16/2014 02:38 PM, a k wrote:
Hi
i want to install emc2--2.6.4
i down load it from linuxcnc
1st -- is 2.6.4 most current one?
2nd when i down load, it gives options
1install Graphical
2install (text)
3install Fail Safe
question is which one do i need?
i want to it look
This list is just the selection for the install process not the actual
LinuxCNC soft ware
Just use #1 Graphical install and fallow the prompts. The default
settings should be right for most situations if you get stuck or have
any questions ask here and we will see what we can do.
On 14-11-17
30 matches
Mail list logo