Il 22/04/2013 00:21, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 3 Date: Sun, 21 Apr 2013 14:27:34 -0700 (PDT) From: Peter C.
Wallace p...@mesanet.com Subject: Re: [Emc-users] 3PWM on 7i43 MESA
board To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Il 07/04/2013 10:41, Roberto Sassoli ha scritto:
Il 06/04/2013 21:49, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 4
Date: Sat, 06 Apr 2013 08:12:30 +0300
From: propcodermarius.alks...@gmail.com
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
To:emc-users
On Sun, 21 Apr 2013, Roberto Sassoli wrote:
Date: Sun, 21 Apr 2013 22:28:04 +0200
From: Roberto Sassoli bobwolf@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
Il 21/04/2013 22:51, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 5
Date: Sun, 21 Apr 2013 13:47:25 -0700 (PDT)
From: Peter C. Wallacep...@mesanet.com
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
On Sun, 21 Apr 2013, Roberto Sassoli wrote:
Date: Sun, 21 Apr 2013 23:08:59 +0200
From: Roberto Sassoli bobwolf@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
Il 06/04/2013 21:49, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 4
Date: Sat, 06 Apr 2013 08:12:30 +0300
From: propcodermarius.alks...@gmail.com
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
To:emc-users@lists.sourceforge.net
Message-ID:kjoarm$85s$1...@ger.gmane.org
On 7 April 2013 09:41, Roberto Sassoli bobwolf@gmail.com wrote:
i'm not a linux avanced user and i don't understand how make the
instructions on the README file
i've installed the webpack9.2 but with wine :-( and this isn't the right
mode
If you prefer to use Windows, then I think you
Roberto,
I am also interested in 3-phase bridge for BLDC servos.
What is your progress?
Marius
On 2013.03.23 22:08, Roberto Sassoli wrote:
hello
i'm an italian new user of EMC2
excuse my bad english
can i use the function 3PWM included in 5i23 SVTP6_7I39 firmware file
with a 7i43 board?
Il 27/03/2013 23:41, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 2
Date: Wed, 27 Mar 2013 11:35:24 +0100
From: Peter Blodowp.blo...@dreki.de
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Message
On 28 March 2013 09:35, Roberto Sassoli bobwolf@gmail.com wrote:
i've downloaded the last xilinx program but i don't understand how can
modify the .xml .BIT and .PIN files included in hostmot's firmware linux
Those are not the files you need to change. The input files to the
Xilinix
On 03/28/2013 04:35 AM, Roberto Sassoli wrote:
Il 27/03/2013 23:41, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 2
Date: Wed, 27 Mar 2013 11:35:24 +0100
From: Peter Blodowp.blo...@dreki.de
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
To: Enhanced Machine Controller (EMC
Robert
concerning permissions to use the programming hardware,
also the web notes say
to restart udev, issue /etc/init.d/boot.udev restart
no, use
sudo service udev restart
hth
regards
tomp
--
Own the
What is GUNDAM's syndrome? Belonging to the category of Murphy's legal
advice system?
Peter
Am 25.03.2013 18:44, schrieb Roberto Sassoli:
Il 25/03/2013 00:31, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 7
Date: Sun, 24 Mar 2013 16:22:55 -0700 (PDT)
From: Peter C.
Il 25/03/2013 00:31, emc-users-requ...@lists.sourceforge.net ha scritto:
Message: 7
Date: Sun, 24 Mar 2013 16:22:55 -0700 (PDT)
From: Peter C. Wallacep...@mesanet.com
Note: the Encoder is always needed, as is enable unless you have special
provisions to disable drive when PWM is not
Il 24/03/2013 01:56, emc-users-requ...@lists.sourceforge.net ha scritto:
From: andy pugh bodge...@gmail.com
Arguably the 7i39 is economical on pins. The hostmot2 2-phase PWMgen
normally uses 6 pins (one pin for each gate of the inverter bridge).
The 7i39 configs only use 3.
3 pins to
On Sun, 24 Mar 2013, Roberto Sassoli wrote:
Date: Sun, 24 Mar 2013 23:59:16 +0100
From: Roberto Sassoli bobwolf@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 3PWM on 7i43 MESA board
hello
i'm an italian new user of EMC2
excuse my bad english
can i use the function 3PWM included in 5i23 SVTP6_7I39 firmware file
with a 7i43 board?
or better
is it difficult make a firmware file which can drive 3PWM in a 7i43 board?
the 7i39 board is a good board but is expensive with cost and
On 23 March 2013 20:08, Roberto Sassoli bobwolf@gmail.com wrote:
can i use the function 3PWM included in 5i23 SVTP6_7I39 firmware file
with a 7i43 board?
or better
is it difficult make a firmware file which can drive 3PWM in a 7i43 board?
The firmware file does exist, I have even used
18 matches
Mail list logo
