On Sat, 6 Jul 2013, propcoder wrote:
Date: Sat, 06 Jul 2013 07:36:22 +0300
From: propcoder marius.alks...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 7i43 firmware for 7i39 card
Hello!
Can anyone share firmware of 7i43 card for 7i39 boards? It seems that
TPEN4_5.BIT, which comes with hostmot2 firmware package, is not the right
one. There are several messages in mailing list history that this
combination has been used, so I would appreciate anyone to share the
firmware
I have 7i43-P (parallel only), which is 200K. And I get:
[ 4088.735773] hm2: loading Mesa HostMot2 driver version 0.15
[ 4088.741550] hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
[ 4088.743592] hm2_7i43.0: firmware: requesting
hm2/7i43-2/SVSTTP4_4_7I39.BIT
[ 4088.747515]
On Fri, 5 Jul 2013, propcoder wrote:
Date: Fri, 05 Jul 2013 17:36:14 +0300
From: propcoder marius.alks...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 7i43 firmware for 7i39 card
I have
2013/7/5 Peter C. Wallace p...@mesanet.com
SVSTTP4_4 was a custom bitfile made for Viesturs (with stepgens outputs on
the sense lines) I did not make a 200K version since he had a 400K card
Yes, that was a long time ago, 2 or 3 years IIRC, so I am now little
amazed, how did Andrew get it to
Peter, would it be possible to make 7I43/7I39 firmware for 200K?
Now it appears I need it..
From the other side - how to use svtp4_7i43-200 with 7i39? I think
there will be different pinout, at least..
On 07/05/2013 05:51 PM, Peter C. Wallace wrote:
SVSTTP4_4 was a custom bitfile made for
2013/7/6 propcoder marius.alks...@gmail.com
Peter, would it be possible to make 7I43/7I39 firmware for 200K?
Now it appears I need it..
That particular 400K version was made specially for me, because I needed
step/dir signal from stepgen to be routed through sense A and sense B
lines on 7i39
