Thanks! I'm going to target being there around 8:30 AM give or take.
On 10/21/2016 6:53 AM, Stuart Stevenson wrote:
> I get there between 6:30 and 7.
>
> On Oct 21, 2016 6:45 AM, "Charles Steinkuehler"
> wrote:
>
>> On 9/28/2016 6:07 PM, Sebastian Kuzminsky wrote:
I get there between 6:30 and 7.
On Oct 21, 2016 6:45 AM, "Charles Steinkuehler"
wrote:
> On 9/28/2016 6:07 PM, Sebastian Kuzminsky wrote:
> > On 09/28/2016 04:36 PM, Charles Steinkuehler wrote:
> >> On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
> >>> On 08/22/2016
On 9/28/2016 6:07 PM, Sebastian Kuzminsky wrote:
> On 09/28/2016 04:36 PM, Charles Steinkuehler wrote:
>> On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
>>> On 08/22/2016 10:35 AM, Ed wrote:
>
I haven't been paying attention to this. Is this the correct date?
>>>
>>> The plan is:
>>>
Regular industrial building.
Main is 480v 3ph
1 step down to 120
On Oct 7, 2016 2:06 PM, "Ed" wrote:
> What power is available? 240V 3 phase I hope?
>
>
>
> --
> Check out the vibrant tech community on
What power is available? 240V 3 phase I hope?
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
Update, I booked a room at the Wichita Inn Airport, for $59
(plus taxes) through Travelocity. They have more rooms at
that rate. Free breakfast, and the specifically mention
WIRED Ethernet (which usually works way better than most
motel wi-fi.)
I'm planning on driving down on Monday the
On 09/28/2016 06:07 PM, Sebastian Kuzminsky wrote:
>>>
>>> The plan is:
>>>
>>> Monday October 17 through Sunday October 23
>>> Helix Machine, 3434 West Harry, Wichita, Kansas
>>>
>>> It's going to be a rocking nerdy good time.
>>
Where is everyone staying? I think last time I stayed at
the Days
There is room for a camper.
On Sep 29, 2016 3:25 PM, "Ed" wrote:
> On 09/28/2016 05:36 PM, Charles Steinkuehler wrote:
> > On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
> >> On 08/22/2016 10:35 AM, Ed wrote:
> >>> I haven't been paying attention to this. Is this the correct
On 09/28/2016 05:36 PM, Charles Steinkuehler wrote:
> On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
>> On 08/22/2016 10:35 AM, Ed wrote:
>>> I haven't been paying attention to this. Is this the correct date?
>> The plan is:
>>
>> Monday October 17 through Sunday October 23
>> Helix Machine,
On Thursday 29 September 2016 08:34:53 Jim Craig wrote:
> On 9/28/2016 9:35 PM, andy pugh wrote:
> > On 29 September 2016 at 02:32, Jeff Epler
wrote:
> >> Besides the social aspects, some of my goals are to
> >> - take a look at some of the things in our github tracker
On 9/28/2016 9:35 PM, andy pugh wrote:
> On 29 September 2016 at 02:32, Jeff Epler wrote:
>
>> Besides the social aspects, some of my goals are to
>> - take a look at some of the things in our github tracker that are
>> languishing
>>
> One thing that I find myself
On 29 September 2016 at 02:32, Jeff Epler wrote:
> Besides the social aspects, some of my goals are to
> - take a look at some of the things in our github tracker that are
>languishing
>
One thing that I find myself coming back to, and is looking increasingly
like
Mostly I'm looking forward to seeing everyone--I'm thrilled that
you're thinking about coming.
Besides the social aspects, some of my goals are to
- take a look at some of the things in our github tracker that are
languishing
- dig out some old branches of my own that need more work before
On 09/28/2016 04:36 PM, Charles Steinkuehler wrote:
> On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
>> On 08/22/2016 10:35 AM, Ed wrote:
>>> I haven't been paying attention to this. Is this the correct date?
>>
>> The plan is:
>>
>> Monday October 17 through Sunday October 23
>> Helix
On 8/22/2016 11:55 AM, Sebastian Kuzminsky wrote:
> On 08/22/2016 10:35 AM, Ed wrote:
>>>
>> I haven't been paying attention to this. Is this the correct date?
>
> The plan is:
>
> Monday October 17 through Sunday October 23
> Helix Machine, 3434 West Harry, Wichita, Kansas
>
> It's going to be
On 08/22/2016 10:35 AM, Ed wrote:
> On 06/15/2016 02:13 PM, Stuart Stevenson wrote:
>> This will most probably be an October 7th, 8th and 9th event.
>> In all honesty anyone can come at any time.
>>
> I haven't been paying attention to this. Is this the correct date?
The plan is:
Monday October
On 06/15/2016 02:13 PM, Stuart Stevenson wrote:
> This will most probably be an October 7th, 8th and 9th event.
> In all honesty anyone can come at any time.
>
I haven't been paying attention to this. Is this the correct date?
Ed.
On 07/20/2016 09:26 AM, Stuart Stevenson wrote:
> Gentlemen,
> My original proposal was intended to get the discussion flowing and
> finalize the date by July 30.
> The week of the 17th is fine with me. Unless other considerations are
> expressed we will consider the week of the 17th the proposed
Gentlemen,
My original proposal was intended to get the discussion flowing and
finalize the date by July 30.
The week of the 17th is fine with me. Unless other considerations are
expressed we will consider the week of the 17th the proposed date.
thanks
Stuart
On Wed, Jul 20, 2016 at 10:12 AM,
On Wed, Jun 22, 2016 at 01:09:30PM -0500, Stuart Stevenson wrote:
> Gentlemen,
> I want to reiterate the date is not set in stone (unless we want it to be).
> I want to facilitate anyone's schedule so if we have conflicts let's change
> the date to resolve them.
> anytime will work for me but a
Stuart,
How about the week after October 14th? Everyone seems to be free then vs
the week before.
On 06/22/2016 01:09 PM, Stuart Stevenson wrote:
> Gentlemen,
> I want to reiterate the date is not set in stone (unless we want it to be).
> I want to facilitate anyone's schedule so if we have
Hi Stuart,
Total change of subject here. Lcnc already had feed driven by a pin. I
wonder if anyone has tried
monitoring the load on the spindle motor and adjusting for constant load
not velocity. What I'm
thinking here is slowing down for corners to control chatter. If this
really works then
I'm pretty fluent in Python if you need a hand. I coded a dxf to G code
in Golang and it is amazingly fast.
JT
On 6/22/2016 8:37 PM, Jon Elson wrote:
> On 06/22/2016 01:09 PM, Stuart Stevenson wrote:
>
> I laboriously converted one of my C programs for generating
> G-code to Python, as an
On 06/22/2016 10:22 PM, Gregg Eshelman wrote:
> Something that reads in a G-code file then outputs a G-code file that
> is mirror imaged along either the X or Y axis. Then when one wants to
> cut the mirror image of the original, simply load that file. It would
> need to handle cut direction
ico-systems.com>
To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net>
Sent: Wednesday, June 22, 2016 7:37 PM
Subject: Re: [Emc-users] Any Interest or Ideas for a Linuxcnc Fest 2016 ?
On 06/22/2016 01:09 PM, Stuart Stevenson wrote:
I laboriously converted one of m
On 06/22/2016 01:09 PM, Stuart Stevenson wrote:
I laboriously converted one of my C programs for generating
G-code to Python, as an attempt to make it into a G-code
wizard. I might like to work with one of the Python gurus
to critique what I've done and eventually convert all of my
c
Gentlemen,
I want to reiterate the date is not set in stone (unless we want it to be).
I want to facilitate anyone's schedule so if we have conflicts let's change
the date to resolve them.
anytime will work for me but a week prior or a week later would be great
thanks
Stuart
On Wed, Jun 15, 2016
This will most probably be an October 7th, 8th and 9th event.
In all honesty anyone can come at any time.
We schedule it for the entire week including the weekend. People come when
they can but most get here Thursday and Friday and go home Sunday or Monday.
We will be set up to start Monday for
On 06/15/2016 10:48 AM, Stuart Stevenson wrote:
> Gentlemen,
> I propose the week of Oct 3rd through whenever the last person leaves.
> Check your schedules against these dates and let the list know if you have
> conflicts.
> I think the goal should be to have a schedule set by July 30. That gives
On 06/15/2016 10:48 AM, Stuart Stevenson wrote:
> Gentlemen,
> I propose the week of Oct 3rd through whenever the last person leaves.
> Check your schedules against these dates and let the list know if you have
> conflicts.
I just got back from the CNC Workshop in Dearborn. Gave an
all-day
I'm in Boulder, and would be interested in this. Let's do it!
On Jun 15, 2016 8:29 AM, "Moses McKnight" wrote:
> I'm definitely interested. I could not make the one in TX, but I will try
> and
> make this one. The time frame is fine with me as well.
>
> On 06/14/2016 03:24
Gentlemen,
I propose the week of Oct 3rd through whenever the last person leaves.
Check your schedules against these dates and let the list know if you have
conflicts.
I think the goal should be to have a schedule set by July 30. That gives us
45 days to make changes and allow time for travel
I'm definitely interested. I could not make the one in TX, but I will try and
make this one. The time frame is fine with me as well.
On 06/14/2016 03:24 PM, Stuart Stevenson wrote:
> Gentlemen,
> I have a 12 foot conference table and another long table in a large room.
> We can easily seat
Sebastian,
I am in the Denver area and I know thee are several others here who are
LCNC enthusiasts (or perhaps newbies like me) who would love to get
together and swap stories, tips, and a beer. If you are ever so
inclined to lend your expertise to such a group, I would be happy to
Gentlemen,
I have a 12 foot conference table and another long table in a large room.
We can easily seat 16-20 people.
Air conditioned and plenty of power and internet.
Any time would work but for playing in the shop and being cooler late
September or early October is probably the best time.
We can
On 05/02/2016 12:17 PM, Stuart Stevenson wrote:
> If there is no interest or opportunity somewhere else you are all welcome
> here.
> I am in a shop of my own now. It may not be as interesting.
> I am no longer associated with MPM in Wichita, Kansas nor EMI in Eminence,
> Missouri.
>
> I think
Well it turns out that I will not be able to make it to the CNC workshop
this year. Too many other things going on in the same time frame. I hope
you all have a good time there. Maybe I will make it next year.
Jim
On 5/2/2016 8:12 PM, Jim Craig wrote:
> I would like to come to the workshop and
bring stuff to show
and demonstrate and this will get you $50 off of admission.
Steve Stallings
> -Original Message-
> From: Jim Craig [mailto:jimcraig5...@windstream.net]
> Sent: Monday, May 02, 2016 9:13 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-user
On 3 May 2016 at 12:00, Ron Ginger wrote:
> The Best Western is near, and that whole area is Ford country, with many
> office buildings and the big Ford Rouge plant. It is not in the 'real'
> Detroit. It is cheaper than the hotel from last year. I am staying there.
The
Everyone should register. Last year we had a discount deal for
presenters, but I have not heard if TechShop is doing that again. I will
check into it.
The Best Western is near, and that whole area is Ford country, with many
office buildings and the big Ford Rouge plant. It is not in the 'real'
On 3 May 2016, at 03:23, Thomas Powderly wrote:
> Hi Bari,
> I cant come, living in Thailand
> I hope talks & demos will be documented/videoed.
Living in the UK, I too am far away, so videos would be very welcome, and might
also be a useful general resource for the wider community.
Marcus
>
On 05/02/2016 08:12 PM, Jim Craig wrote:
> I would like to come to the workshop and I could possibly present. If we
> are coming as a presenter do we register as a student on the webpage?
>
> I see the Best Western Greenfield Inn is close by. Has anybody stayed
> there. Is this a good part of town
I got mine!
tomp
On 05/03/16 10:37, bari wrote:
> Tom,
>
> We were talking about having one in Thailand late fall/winter as long as
> there are elephants.
>
> -Bari
>
--
Find and fix application performance issues
Tom,
We were talking about having one in Thailand late fall/winter as long as
there are elephants.
-Bari
On 05/02/2016 09:23 PM, Thomas Powderly wrote:
> Hi Bari,
> I cant come, living in Thailand
> I hope talks & demos will be documented/videoed.
> tomp tjtr33
>
> On 05/03/16 00:27, bari
Hi Bari,
I cant come, living in Thailand
I hope talks & demos will be documented/videoed.
tomp tjtr33
On 05/03/16 00:27, bari wrote:
> Anyone else interested in having another this year?
>
> Any ideas where to hold it? Are there any other events this summer with
> overlapping interests?
>
>
>
>
I would like to come to the workshop and I could possibly present. If we
are coming as a presenter do we register as a student on the webpage?
I see the Best Western Greenfield Inn is close by. Has anybody stayed
there. Is this a good part of town to stay overnight? I am totally
unfamiliar
I would really like to see more linuxCNC presence at the workshop. So
far Jon Elson and Bob Luken have agreed to do a session on LinuxCNC, but
I could make a lot more room for Linux sessions. I have several slots on
Friday which I want to be 'how I did my system' talks by users. There is
room
Why don't you guys meet up at the CNC Workshop, in Dearborn Michigan?
It is at the Tech Shop Detroit, which is a very interesting place (as is
the Henry Ford museum, and Greenfield Village, almost adjacent to Tech Shop)
The CNC Workshop could still do with some LinuxCNC discussions/seminars,
and
Still in Wichita
On Mon, May 2, 2016 at 1:24 PM, John Thornton wrote:
> Hi Stuart,
>
> Where are you located at now?
>
> JT
>
> On 5/2/2016 1:17 PM, Stuart Stevenson wrote:
> > HH
> >
> > If there is no interest or opportunity somewhere else you are all welcome
> >
I call it
Helix Machine
3434 West Harry
Wichita, Kansas
On Mon, May 2, 2016 at 1:32 PM, Stuart Stevenson wrote:
> Still in Wichita
>
> On Mon, May 2, 2016 at 1:24 PM, John Thornton wrote:
>
>> Hi Stuart,
>>
>> Where are you located at now?
>>
>> JT
>>
>>
Hi Stuart,
Where are you located at now?
JT
On 5/2/2016 1:17 PM, Stuart Stevenson wrote:
> HH
>
> If there is no interest or opportunity somewhere else you are all welcome
> here.
> I am in a shop of my own now. It may not be as interesting.
> I am no longer associated with MPM in
HH
If there is no interest or opportunity somewhere else you are all welcome
here.
I am in a shop of my own now. It may not be as interesting.
I am no longer associated with MPM in Wichita, Kansas nor EMI in Eminence,
Missouri.
I think sometime in the next few weeks or sometime early
Which continent?
On Mon, 2 May 2016 11:27:28 -0500
bari wrote:
> Anyone else interested in having another this year?
>
> Any ideas where to hold it? Are there any other events this summer with
> overlapping interests?
>
>
>
>
On 05/02/2016 10:27 AM, bari wrote:
> Anyone else interested in having another this year?
I'd like that very much.
> Any ideas where to hold it? Are there any other events this summer with
> overlapping interests?
There's "The CNC Workshop 2016", June 8-16 in Detroit:
Anyone else interested in having another this year?
Any ideas where to hold it? Are there any other events this summer with
overlapping interests?
--
Find and fix application performance issues faster with
55 matches
Mail list logo