2009/10/9 Alan Condit acon...@ipns.com:
I have been gone for a couple weeks, so I don't know if this has
already been
addressed.
I haven't seen anything.
I have noticed something a bit odd in that regard with 2.3.3 myself,
but I haven't paid enough attention to it to investigate (I have been
Does the max-velocity slider have any effect?
as andy said
i had this problem a while back slider set to 10m/min slider is a
overall max velocity of the overall combined join velocity so increase
it and see what happens
robert
EMC2-2.3.3 (robert)
From: robert rob...@innovative-rc.com
Date: October 9, 2009 4:42:10 AM PDT
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Max velocity suddenly limited to that of
slowest axis EMC2-2.3.3
Reply-To: Enhanced Machine
On Fri, Oct 09, 2009 at 08:34:23AM -0700, Alan Condit wrote:
The Max_Velocity slider should allow me to set the 120ipm but it
won't.
I think you need to set [TRAJ]MAX_LINEAR_VELOCITY to whatever you
want the top of the max velocity slider to be.
On Fri, Oct 09, 2009 at 10:56:05AM -0500, Chris Radek wrote:
On Fri, Oct 09, 2009 at 08:34:23AM -0700, Alan Condit wrote:
The Max_Velocity slider should allow me to set the 120ipm but it
won't.
I think you need to set [TRAJ]MAX_LINEAR_VELOCITY to whatever you
want the top of the max
On Oct 9, 2009, at 10:03 AM, emc-users-requ...@lists.sourceforge.net
wrote:
From: Chris Radek ch...@timeguy.com
Date: October 9, 2009 8:56:05 AM PDT
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Max velocity suddenly limited
I just upgraded from 2.3.1 to 2.3.3 and suddenly my maximum velocity
is limited to the speed of my X axis. My X axis has a max velocity of
15 ipm and my Z axis used to have 60ipm. I made no changes other than
the upgrade. Has anyone else seen this problem? Has it been fixed?
Alan
---
Alan
I have been gone for a couple weeks, so I don't know if this has
already been
addressed.
I just upgraded my lathe from 2.3.1 to 2.3.3 and suddenly my maximum
velocity is
limited to the speed of my X axis. My X axis has a max velocity of 15
ipm and my
Z axis used to have 60ipm. I made no