You can use non-pilot arc systems but you may need to tweak your pierce
cycle to nearly touch the work before you turn the torch on. I assume
your torch uses HF start. In that case pay very close attention to good
grounding and screening. HF start can play havoc with your electronics.
I would
On Wed, 22 Aug 2018 at 11:42, andy pugh wrote:
>
> I am not sure if they have to use a custom belt, though.
I found the answer, it is standard "T5" or "T2.5" section belting.
Readily available in the UK at least (in fact you have to look hard to
find anything else)
--
atp
"A motorcycle is a
On Wed, 22 Aug 2018 at 03:12, Greg Bentzinger via Emc-users
wrote:
> I want to use a magnetic break away mount for the Plasma slide as I also may
> mount a Laser on that slide.
I bought a bunch of magnetic handbag clasps for an unrelated project
and find myself wondering if they would work for
So I want to build a combo table with dual Z slides - Plasma and Mill/Router.
I have a 50A 60% duty cycle scratch start machine now. I know that if I use it
I will have trouble with fine screen and expanded metal will be hopeless.
On raw stock it works great, but one of the key reasons I bought