On Monday 18 March 2019 14:02:12 Gene Heskett wrote: > > Then last night I plugged in the A table, but it stopped working as > > I believe I'll have to fix the windings order.
That turned out to be a loose connection in the 5 volts to the driver. And my code worked, giving me a scale of 20.something/degree. So for the first time in the 6 or 8 years I've had a rotary, its actually calibrated. > > Not the first time > > as no two motor cables are wired the same so I've had to adjust > > other motors already. And I think I've a hal routine to calibrate > > the rotation scale working by y measureing apos-fb for 100 clicks of > > the home switch. I like to be able to set angles to arc-minutes > > accuracy at least. :) > > Speaking to rotary's, is there a convention as to which way it turns? > Are we looking face on, or down the axis from the rear for clockwise? Ping? And I'm disappointed in this mister. Its best suction still needs around 50 psi to prime the suction line with the src tank sitting on the bed, AND its blowing way more air out the side of the flex joints than is Surely they aren't all this bad? I was under the impression 15 psi was a great plenty, but not for this one/ Thanks guys. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
