Re: [Emc-users] can I hide the nativecam interface

[gene heskett]

On 9/22/22 12:17, John Dammeyer wrote:

Is this real or is it spam?

I wondered that myself John, and wound up deleting it.

Any body that blasts a public mailing list with all that legally 
worthless junk,

gets similar treatment here at the Heskett ranch.

Take care & stay well, John.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[John Dammeyer]

Is this real or is it spam?

> -Original Message-
> From: Rob C [mailto:rclandro...@gmail.com]
> Sent: September-22-22 3:54 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] can I hide the nativecam interface
> 
> 
> Rob C has sent you an email via Gmail confidential mode:
> 
> [image: Gmail logo]Re: [Emc-users] can I hide the nativecam interface 
> <https://confidential-
> mail.google.com/msg/AGMme3NR26DqmZZsnYUxNMs9jw3obeYOd28gvt8-
> DzbjpuuFOaQQVV5k3a7OJwi8rUIULAjWyIRlo44yUOM9Ho-
> qfSvH7UcFI2RcpXkGpMErvLPw_RroeU6HcY2D4h3PzXPb6FA421jSpn8KEIyjBoWGV1lTsNe2rmI=>
> 
> This message was sent on 22 Sept 2022 at 03:54:04 GMT-7
> You can open it by clicking the link below. This link will only work for 
> emc-users@lists.sourceforge.net.
> 
> View the email <https://confidential-
> mail.google.com/msg/AGMme3NR26DqmZZsnYUxNMs9jw3obeYOd28gvt8-
> DzbjpuuFOaQQVV5k3a7OJwi8rUIULAjWyIRlo44yUOM9Ho-
> qfSvH7UcFI2RcpXkGpMErvLPw_RroeU6HcY2D4h3PzXPb6FA421jSpn8KEIyjBoWGV1lTsNe2rmI=>
> 
> Gmail confidential mode gives you more control over the messages that you 
> send. The sender may have
> chosen to set an expiry time, disable printing or forwarding, or track access 
> to this message. Learn more
> <https://support.google.com/mail/answer/7674059>
> Gmail: Email by Google
> Use is subject to the Google Privacy Policy 
> <https://myaccount.google.com/privacypolicy?hl=en-GB>
> Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
> You have received this message because someone sent you an email via Gmail 
> confidential mode.
> [image: Google logo]
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[Jérémie Tarot]

Le ven. 28 janv. 2022 à 17:13, Rob C  a écrit :
>
> Yes nativecam will work for milling, plasma and lathe operations...

I wonder how it compares with lathe macros ?

> I use PlasmaC for my plasma setup so like to be on the bleeding edge of
> development (master)...

Exactly why I believe UI projects should have their own repository !
These have opposite needs to LinuxCNC as far as release cycle is
concerned: they need fast paced short cycles whereas "core" needs long
battle tested ones.

Le ven. 28 janv. 2022 à 17:13, Rob C  a écrit :
>
> Yes nativecam will work for milling, plasma and lathe operations.
> unfortunately its not been updated to python3 .. so if you use it on a
> debian bullseye or linuxcnc master build it won't work :(
>
> I've tried to have a go at making it nativecam + python3 functional but
> failed but really like nativecam.
>
> I use PlasmaC for my plasma setup so like to be on the bleeding edge of
> development (master)  hence I can't use python 2 + 3 unless I went back
> to debian buster which I may do eventually (busy doing other things
> (noncnc) at present)
>
> On Thu, 27 Jan 2022 at 22:42, Thaddeus Waldner  wrote:
>
> > I’m not sure if you can “hide” NativeCam once embedded, but it’s possible
> > to use it as a standalone application. That way it won’t take up space on
> > your CNC gui.
> >
> >
> > > On Jan 27, 2022, at 12:03 PM, fxkl47BF--- via Emc-users <
> > emc-users@lists.sourceforge.net> wrote:
> > >
> > > I started playing with nativecam.
> > > It's pretty neat.
> > > With linuxcnc running is there a way to "hide" the nativecam interface?
> > >
> > >
> > >
> > > ___
> > > Emc-users mailing list
> > > Emc-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
> >
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
--
Jérémie Tarot
http://about.me/silopolis


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[Rob C]

Rob C has sent you an email via Gmail confidential mode:

[image: Gmail logo]Re: [Emc-users] can I hide the nativecam interface 
<https://confidential-mail.google.com/msg/AGMme3NR26DqmZZsnYUxNMs9jw3obeYOd28gvt8-DzbjpuuFOaQQVV5k3a7OJwi8rUIULAjWyIRlo44yUOM9Ho-qfSvH7UcFI2RcpXkGpMErvLPw_RroeU6HcY2D4h3PzXPb6FA421jSpn8KEIyjBoWGV1lTsNe2rmI=>

This message was sent on 22 Sept 2022 at 03:54:04 GMT-7
You can open it by clicking the link below. This link will only work for 
emc-users@lists.sourceforge.net.

View the email 
<https://confidential-mail.google.com/msg/AGMme3NR26DqmZZsnYUxNMs9jw3obeYOd28gvt8-DzbjpuuFOaQQVV5k3a7OJwi8rUIULAjWyIRlo44yUOM9Ho-qfSvH7UcFI2RcpXkGpMErvLPw_RroeU6HcY2D4h3PzXPb6FA421jSpn8KEIyjBoWGV1lTsNe2rmI=>

Gmail confidential mode gives you more control over the messages that you send. 
The sender may have chosen to set an expiry time, disable printing or 
forwarding, or track access to this message. Learn more 
<https://support.google.com/mail/answer/7674059>
Gmail: Email by Google
Use is subject to the Google Privacy Policy 
<https://myaccount.google.com/privacypolicy?hl=en-GB>
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
You have received this message because someone sent you an email via Gmail 
confidential mode.
[image: Google logo]

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[andrew beck]

Rob C  do you know what is the latest way to install native cam?

it definitely looks cool and would be great to have conversational g code
generators finally when i can't be bothered with the cam

i am running 2.8.3 so i think its still python2 and we are good to go

On Fri, Jan 28, 2022 at 8:13 AM Rob C  wrote:

> Yes nativecam will work for milling, plasma and lathe operations.
> unfortunately its not been updated to python3 .. so if you use it on a
> debian bullseye or linuxcnc master build it won't work :(
>
> I've tried to have a go at making it nativecam + python3 functional but
> failed but really like nativecam.
>
> I use PlasmaC for my plasma setup so like to be on the bleeding edge of
> development (master)  hence I can't use python 2 + 3 unless I went back
> to debian buster which I may do eventually (busy doing other things
> (noncnc) at present)
>
> On Thu, 27 Jan 2022 at 22:42, Thaddeus Waldner  wrote:
>
> > I’m not sure if you can “hide” NativeCam once embedded, but it’s possible
> > to use it as a standalone application. That way it won’t take up space on
> > your CNC gui.
> >
> >
> > > On Jan 27, 2022, at 12:03 PM, fxkl47BF--- via Emc-users <
> > emc-users@lists.sourceforge.net> wrote:
> > >
> > > I started playing with nativecam.
> > > It's pretty neat.
> > > With linuxcnc running is there a way to "hide" the nativecam interface?
> > >
> > >
> > >
> > > ___
> > > Emc-users mailing list
> > > Emc-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
> >
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[Rob C]

Yes nativecam will work for milling, plasma and lathe operations.
unfortunately its not been updated to python3 .. so if you use it on a
debian bullseye or linuxcnc master build it won't work :(

I've tried to have a go at making it nativecam + python3 functional but
failed but really like nativecam.

I use PlasmaC for my plasma setup so like to be on the bleeding edge of
development (master)  hence I can't use python 2 + 3 unless I went back
to debian buster which I may do eventually (busy doing other things
(noncnc) at present)

On Thu, 27 Jan 2022 at 22:42, Thaddeus Waldner  wrote:

> I’m not sure if you can “hide” NativeCam once embedded, but it’s possible
> to use it as a standalone application. That way it won’t take up space on
> your CNC gui.
>
>
> > On Jan 27, 2022, at 12:03 PM, fxkl47BF--- via Emc-users <
> emc-users@lists.sourceforge.net> wrote:
> >
> > I started playing with nativecam.
> > It's pretty neat.
> > With linuxcnc running is there a way to "hide" the nativecam interface?
> >
> >
> >
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[Thaddeus Waldner]

I’m not sure if you can “hide” NativeCam once embedded, but it’s possible to 
use it as a standalone application. That way it won’t take up space on your CNC 
gui.


> On Jan 27, 2022, at 12:03 PM, fxkl47BF--- via Emc-users 
>  wrote:
> 
> I started playing with nativecam.
> It's pretty neat.
> With linuxcnc running is there a way to "hide" the nativecam interface?
> 
> 
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[fxkl47BF--- via Emc-users]

On Fri, 28 Jan 2022, andrew beck wrote:

> I should have been more specific.
> I mean can it be used in a computer to make g code for a lathe
>
> On Fri, 28 Jan 2022, 10:09 fxkl47BF--- via Emc-users, 
>  wrote:
>   On Fri, 28 Jan 2022, andrew beck wrote:
>
>   > Hey can you use native cam on a lathe??
>   >
>   > On Fri, 28 Jan 2022, 07:03 fxkl47BF--- via Emc-users, 
>  wrote:
>   >?? ? ?Istarted playing with nativecam.
>   >?? ? ?It's pretty neat.
>   >?? ? ?With linuxcnc running is there a way to "hide" the nativecam 
> interface?
>
>   As far as I know it can only be used on a computer.

That was my feeble attempt at humor :)



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[Ralph Stirling]

Well, I suspect what Andrew was asking was whether Native CAM will generate 
toolpaths and g-code for lathes.  There seems to be a lot of discussion about 
nativecam on the forum, and I see mention of lathe mode, so I think "yes".

-- Ralph

On Jan 27, 2022 1:07 PM, fxkl47BF--- via Emc-users 
 wrote:
CAUTION: This email originated from outside the Walla Walla University email 
system.


On Fri, 28 Jan 2022, andrew beck wrote:

> Hey can you use native cam on a lathe??
>
> On Fri, 28 Jan 2022, 07:03 fxkl47BF--- via Emc-users, 
>  wrote:
>   I started playing with nativecam.
>   It's pretty neat.
>   With linuxcnc running is there a way to "hide" the nativecam interface?

As far as I know it can only be used on a computer.



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-usersdata=04%7C01%7Cralph.stirling%40wallawalla.edu%7Cdb4ee29221b54a0e6f7208d9e1d8fbf7%7Cd958f048e43142779c8debfb75e7aa64%7C0%7C0%7C637789144321517837%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=iEEywy%2BST33gFqQx4vNbrgMMm4skbxbXUrSzovt%2BCNo%3Dreserved=0

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[andrew beck]

I should have been more specific.

I mean can it be used in a computer to make g code for a lathe

On Fri, 28 Jan 2022, 10:09 fxkl47BF--- via Emc-users, <
emc-users@lists.sourceforge.net> wrote:

> On Fri, 28 Jan 2022, andrew beck wrote:
>
> > Hey can you use native cam on a lathe??
> >
> > On Fri, 28 Jan 2022, 07:03 fxkl47BF--- via Emc-users, <
> emc-users@lists.sourceforge.net> wrote:
> >   I started playing with nativecam.
> >   It's pretty neat.
> >   With linuxcnc running is there a way to "hide" the nativecam
> interface?
>
> As far as I know it can only be used on a computer.
>
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[fxkl47BF--- via Emc-users]

On Fri, 28 Jan 2022, andrew beck wrote:

> Hey can you use native cam on a lathe??
>
> On Fri, 28 Jan 2022, 07:03 fxkl47BF--- via Emc-users, 
>  wrote:
>   I started playing with nativecam.
>   It's pretty neat.
>   With linuxcnc running is there a way to "hide" the nativecam interface?

As far as I know it can only be used on a computer.



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] can I hide the nativecam interface

[andrew beck]

Hey can you use native cam on a lathe?

On Fri, 28 Jan 2022, 07:03 fxkl47BF--- via Emc-users, <
emc-users@lists.sourceforge.net> wrote:

> I started playing with nativecam.
> It's pretty neat.
> With linuxcnc running is there a way to "hide" the nativecam interface?
>
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] can I hide the nativecam interface

[fxkl47BF--- via Emc-users]

I started playing with nativecam.
It's pretty neat.
With linuxcnc running is there a way to "hide" the nativecam interface?



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users