it looks like a path problem Gene,
it's trying to find the path to features.ui
if it runs from the command line , then check the path in your ini
( dont worry i had the same problem )
where have you placed linuxcnc-features ?
did you run the setup
On 4 January 2016 at 19:23, Gene Heskett
On Tuesday 05 January 2016 03:31:58 Sarah Armstrong wrote:
> it looks like a path problem Gene,
> it's trying to find the path to features.ui
>
> if it runs from the command line , then check the path in your ini
> ( dont worry i had the same problem )
If by running from a cd to that directory,
On Tuesday 05 January 2016 11:24:43 Sarah Armstrong wrote:
Back on the list for the archives.
> your loading the glade file totally different to me
>
> in
> [display]
> GLADEVCP = -U --catalog=mill
> /home/sarah/linuxcnc/linuxcnc-features/features.ui
> your loading into a tab i think ,
And
On Tuesday 05 January 2016 11:54:34 Sarah Armstrong wrote:
> in your hal file , how are you loading features.ui
> halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -x 73400472 -U
> --catalog=mill features.ui
> this is wrong ? theirs no path shown
>
> this is all you need now
> GLADEVCP = -U
> Does Nick have a web page where I might be able to read it first hand?
See new post with Subject: features_preview_3
--
Dewey Garrett
--
___
Emc-users mailing list
in or to and i’ll start up the box and let you know
> >
> >
> >
> > Sent from Mail <http://go.microsoft.com/fwlink/?LinkId=550986> for
> > Windows 10
> >
> >
> >
> >
> > *From: *Gene Heskett <ghesk...@wdtv.com>
> > *Sent: *05 Ja
Greetings all;
I have, I believe, after going over in "wiring up" procedure in the
README.md file, done everything it seems to call for. But linuxcnc
falls over while initializing.
Heres a paste from the cli:
gene@coyote:~/linuxcnc/configs/sim.axis$ linuxcnc -l
LINUXCNC - 2.7.3
Machine