At the moment the idea of recreating the spindle to be able to do BT30 just
isn't in the cards. I can't even turn decent pulleys that have zero wobble.
I'm not the best machinist I think. And then there's the cost of BT30 tooling.
In reality, AFAIK, the TT Tooling with 3/4" shaft into the R8
Already posted this on IRC but just in case:
it is a very good program:
http://genericcam.sourceforge.net/
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Mon, 19 Jul 2021 at 01:41, John Dammeyer wrote:
> The disk spring setup would be great if the only thing I used was TT Tooling.
> But if I remove the R8 3/4" flat top collet and insert my 3/4" R8 drill
> chuck the springs seem like they'd be an issue.
You might be able to convert the
I just read all of this because I've been a little busy.
I think all this CoC just triggered the paranoia some have inside (Wich I
understand and it's not a bad thing if it stays in logical levels). It
really isn't a big deal for me and from what I've red it's the same for
most. I always
On Mon, 2021-07-19 at 11:41 +0100, andy pugh wrote:
> On Mon, 19 Jul 2021 at 11:35, Gene Heskett
> wrote:
> > so in 9 years I would have assumed
> > SOME code would be written.
>
> There is some code, though you have to look for it:
>
> https://sourceforge.net/p/genericcam/git/ci/master/tree/
>
On Monday 19 July 2021 03:59:02 Valerio Bellizzomi wrote:
> Already posted this on IRC but just in case:
>
> it is a very good program:
I would argue that point, its pre-alpha status, no useable code yet. The
promise is there, and it sounds good. I would love to be able to do
something in
On Monday 19 July 2021 08:02:33 Valerio Bellizzomi wrote:
> On Mon, 2021-07-19 at 11:41 +0100, andy pugh wrote:
> > On Mon, 19 Jul 2021 at 11:35, Gene Heskett
> >
> > wrote:
> > > so in 9 years I would have assumed
> > > SOME code would be written.
> >
> > There is some code, though you have to
Gene, Chris, Milosz and everybody who has tried to help,
I am reposting this because I screwed up earlier and failed to change the
Subject line.
I took the power supply out of the controller cabinet and set it up on the
bench. I used a small screw driver to turn the fan a few times, then I
On Mon, 19 Jul 2021 at 11:35, Gene Heskett wrote:
>
> so in 9 years I would have assumed
> SOME code would be written.
There is some code, though you have to look for it:
https://sourceforge.net/p/genericcam/git/ci/master/tree/
--
atp
"A motorcycle is a bicycle with a pandemonium attachment
On Monday 19 July 2021 06:41:07 andy pugh wrote:
> On Mon, 19 Jul 2021 at 11:35, Gene Heskett
wrote:
> > so in 9 years I would have assumed
> > SOME code would be written.
>
> There is some code, though you have to look for it:
>
> https://sourceforge.net/p/genericcam/git/ci/master/tree/
Thank
>
> I would argue that point, its pre-alpha status, no useable code yet. The
> promise is there, and it sounds good. I would love to be able to do
> something in openscad, export the .stl, and carve it on my 6040 or
> G0704. So the site got bookmarked and will be watched. But the
> prospectus pdf
Fire your slicer?
Or maybe not?
https://hackaday.com/category/3d-printer-hacks/
Martin
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Anyone have any comments on this UI
https://kcjengr.github.io/probe_basic/quick_start.html
John Dammeyer
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Mon, 19 Jul 2021 at 18:15, John Dammeyer wrote:
>
> Anyone have any comments on this UI
> https://kcjengr.github.io/probe_basic/quick_start.html
It seems very popular on the forum.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of
Installing g it appears to want Prempt RT. I'm on doggy walk at the moment. Is
that what is on the Pi4 LCNC?Sent from my Samsung S10
Original message From: andy pugh Date:
2021-07-19 10:32 a.m. (GMT-08:00) To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users]
On Mon, 2021-07-19 at 10:43 -0700, Chris Albertson wrote:
> > I would argue that point, its pre-alpha status, no useable code
> > yet. The
> > promise is there, and it sounds good. I would love to be able to do
> > something in openscad, export the .stl, and carve it on my 6040 or
> > G0704. So
Well after playing with it for a couple of hours on the bench, the fan would
start reliably on power on. I let it sit for a couple of hours and it still
started on power on. So, I bolted it back in to the cabinet. When I powered it
on silence except for that click now and then. Lightbulb on.
Is it a 3-wire fan?
The yellow wire on those fans is a reverse-acting PWM control line (0 = full
on, 90% = 10% on, etc.). It’s possible that the controller turns off the fan
when it doesn’t need cooling.
> On Jul 19, 2021, at 8:50 AM, Alan Condit wrote:
>
> Gene, Chris, Milosz and everybody
18 matches
Mail list logo