Re: [e-users] Terminology Suggestion
On 14-10-07 15:01, Shelia Babel wrote: Terminology has a switch-terminal shortcut key which is: Ctrl+Prior/Next But when Terminology has multiple tabs open in more than one split sections, the only way to switch between sections via keyboard is by cycling through tabs with the above commands until a tab in the desired section is chosen. My suggestion is to add a shortcut specifically for cycling through the terminals of each split section. It might already be the case on the git version or I don't understand what you really would like. -- Boris Faure Pointer Arithmetician -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] systray replacement
Be sure you start it AFTER E. Configure the shelf to be Below Everything. Maybe you need compositing enabled, I did not checked without. No other ideas, for me it just works. Peter On 10/08/2014 18:46, Massimo Maiurana wrote: How? I tried every position, starting from bottom, starting from top and setting a margin which should make it place itself over the shelf, set the shelf below all, set tint2 on the top layer, but it is always placed above the shelf :( Quelrond ha scritto il 08/10/2014 alle 14:13: Yes On 10/08/2014 14:00, Massimo Maiurana wrote: And can it be placed OVER a shelf? Because I tried with stalonetray and no matter what geometry I set it always put its window right above the shelf, refusing to cover it :( Quelrond ha scritto il 08/10/2014 alle 09:17: Yes, that's the way I'm using it. You need the last version from http://code.google.com/p/tint2 Follow the instructions in wiki to configure it manually: http://code.google.com/p/tint2/wiki/Configure The most important line in my config is: panel_items = S So only systray item is present on the panel. Peter On 10/08/2014 05:33, Gary wrote: Any way to get tint2 to be a systray only, no tasks, calendars or anything else? Gary Quoting Quelrond quelr...@gmail.com: tint2, git version. Works fine as systray for me on e17 under FreeBSD. Peter On 10/07/2014 02:06, Conrad Hill-Knight wrote: The consensus seems to be that the systray in E19 is broken, and there are no intentions to fix it. What would be a suitable E-like replacement? What are people using right now, given that the current systray keeps losing its icons? Thanks! -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] systray replacement
I'm starting it from terminology to try it, so definitely after E starts, and being on current git it is of course composited. Tried both with shelf above and below all, but nothing change: it still refuses to place itself over the shelf :( Quelrond ha scritto il 09/10/2014 alle 13:55: Be sure you start it AFTER E. Configure the shelf to be Below Everything. Maybe you need compositing enabled, I did not checked without. No other ideas, for me it just works. Peter On 10/08/2014 18:46, Massimo Maiurana wrote: How? I tried every position, starting from bottom, starting from top and setting a margin which should make it place itself over the shelf, set the shelf below all, set tint2 on the top layer, but it is always placed above the shelf :( Quelrond ha scritto il 08/10/2014 alle 14:13: Yes On 10/08/2014 14:00, Massimo Maiurana wrote: And can it be placed OVER a shelf? Because I tried with stalonetray and no matter what geometry I set it always put its window right above the shelf, refusing to cover it :( Quelrond ha scritto il 08/10/2014 alle 09:17: Yes, that's the way I'm using it. You need the last version from http://code.google.com/p/tint2 Follow the instructions in wiki to configure it manually: http://code.google.com/p/tint2/wiki/Configure The most important line in my config is: panel_items = S So only systray item is present on the panel. Peter On 10/08/2014 05:33, Gary wrote: Any way to get tint2 to be a systray only, no tasks, calendars or anything else? Gary Quoting Quelrond quelr...@gmail.com: tint2, git version. Works fine as systray for me on e17 under FreeBSD. Peter On 10/07/2014 02:06, Conrad Hill-Knight wrote: The consensus seems to be that the systray in E19 is broken, and there are no intentions to fix it. What would be a suitable E-like replacement? What are people using right now, given that the current systray keeps losing its icons? Thanks! -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list
Re: [e-users] systray replacement
lxpanel also has a systray. -- Nigel -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] systray replacement
My tint2rc, maybe it helps. # Tint2 config file # For information on manually configuring tint2 see http://code.google.com/p/tint2/wiki/Configure # Background definitions # Panel panel_monitor = 1 panel_position = bottom left horizontal panel_size = 0 23 panel_margin = 0 0 panel_padding = 0 0 0 panel_dock = 0 wm_menu = 0 panel_layer = bottom panel_background_id = 0 panel_items = S # Panel Autohide autohide = 0 autohide_show_timeout = 0.0 autohide_hide_timeout = 0.0 autohide_height = 0 strut_policy = none # Taskbar taskbar_mode = single_desktop taskbar_padding = 0 0 0 taskbar_background_id = 0 #taskbar_active_background_id = 0 # Tasks urgent_nb_of_blink = 7 task_icon = 1 task_text = 1 task_centered = 1 task_maximum_size = 200 32 task_padding = 0 0 task_background_id = 0 task_active_background_id = 0 task_urgent_background_id = 0 task_iconified_background_id = 0 # Task Icons task_icon_asb = 100 0 0 task_active_icon_asb = 100 0 0 task_urgent_icon_asb = 100 0 0 task_iconified_icon_asb = 100 0 0 # Fonts task_font = Sans 12 task_font_color = #FF 100 task_active_font_color = #FF 100 task_urgent_font_color = #FF 100 task_iconified_font_color = #FF 100 font_shadow = 0 # System Tray systray = 0 systray_padding = 0 0 0 systray_sort = ascending systray_background_id = 0 systray_icon_size = 0 systray_icon_asb = 100 0 0 # Tooltips tooltip = 0 tooltip_padding = 0 0 tooltip_show_timeout = 0 tooltip_hide_timeout = 0 tooltip_background_id = 0 tooltip_font = Sans 12 tooltip_font_color = #FF 100 # Mouse mouse_middle = none mouse_right = none mouse_scroll_up = none mouse_scroll_down = none # Battery battery = 0 battery_low_status = 20 battery_low_cmd = notify-send battery low battery_hide = 90 bat1_font = Sans 12 bat2_font = Sans 12 battery_font_color = #FF 100 battery_padding = 0 0 battery_background_id = 0 # End of config On 10/09/2014 14:16, Massimo Maiurana wrote: I'm starting it from terminology to try it, so definitely after E starts, and being on current git it is of course composited. Tried both with shelf above and below all, but nothing change: it still refuses to place itself over the shelf :( Quelrond ha scritto il 09/10/2014 alle 13:55: Be sure you start it AFTER E. Configure the shelf to be Below Everything. Maybe you need compositing enabled, I did not checked without. No other ideas, for me it just works. Peter On 10/08/2014 18:46, Massimo Maiurana wrote: How? I tried every position, starting from bottom, starting from top and setting a margin which should make it place itself over the shelf, set the shelf below all, set tint2 on the top layer, but it is always placed above the shelf :( Quelrond ha scritto il 08/10/2014 alle 14:13: Yes On 10/08/2014 14:00, Massimo Maiurana wrote: And can it be placed OVER a shelf? Because I tried with stalonetray and no matter what geometry I set it always put its window right above the shelf, refusing to cover it :( Quelrond ha scritto il 08/10/2014 alle 09:17: Yes, that's the way I'm using it. You need the last version from http://code.google.com/p/tint2 Follow the instructions in wiki to configure it manually: http://code.google.com/p/tint2/wiki/Configure The most important line in my config is: panel_items = S So only systray item is present on the panel. Peter On 10/08/2014 05:33, Gary wrote: Any way to get tint2 to be a systray only, no tasks, calendars or anything else? Gary Quoting Quelrond quelr...@gmail.com: tint2, git version. Works fine as systray for me on e17 under FreeBSD. Peter On 10/07/2014 02:06, Conrad Hill-Knight wrote: The consensus seems to be that the systray in E19 is broken, and there are no intentions to fix it. What would be a suitable E-like replacement? What are people using right now, given that the current systray keeps losing its icons? Thanks! -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___
Re: [e-users] systray replacement
Quelrond ha scritto il 09/10/2014 alle 16:53: My tint2rc, maybe it helps. Thanks, but it doesn't change nothing. Even with your configuration it is still placed above the bottom shelf :( -- Massimo Maiurana Ragusa (RG) -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
[e-users] problems with left handed mouse/touchpad
Hi, I'm one of lucky left handed people. It causes some problem here and there. Enlightenment is one of such places, however, the problem cause might be somewhere else in Linux/X stack. Let me describe my issue. There is option to change main mouse button in Input-Mouse. It works as expected for mouse, but not exactly for touchpad. The touchpad in my laptop is rather standard - has 3 parts. There is left and right button on the bottom and main area on the top. The main area is used to control pointer movements, but also can trigger mouse clicks. One figer tap for main button, two fingers tap for additional one. Quite standard. Switching main button in Input-Mouse changing functionality for two buttons, left becomes right, right, left. Works as expected. However, it also switches 'tapping' for main area. So now 'main click' is trigger for double tap, and additional one by one finger tap. Looks like they are 'binded/aliases to left/right button, rather than functionality. Is extremely annoying, so annoying, that very time I connects or disconnect external mouse I have to switch left-right mouse in input-mouse. Is it enlightenment fault, that 'tapping' is not properly set for left-handed, or is a cause somewhere 'below'? Drivers? X-server libraries? Wher should I raise a bug? Thanks, Wawrzek -- Dr Wawrzyniec NiewodniczaĆskior Wawrzek for short PhD in Quantum Chemistry MSc in Molecular Engineering WWW: http://wawrzek.name E-MAIL: j...@wawrzek.name Linux User #177124 -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] systray replacement
Hi, Out of curiosity, wher is enlightenment systray code? Cheers, Wawrzek -- Dr Wawrzyniec NiewodniczaĆskior Wawrzek for short PhD in Quantum Chemistry MSc in Molecular Engineering WWW: http://wawrzek.name E-MAIL: j...@wawrzek.name Linux User #177124 -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] systray replacement
Wawrzek Niewodniczanski ha scritto il 09/10/2014 alle 21:28: Hi, Out of curiosity, wher is enlightenment systray code? In enlightenment sources, precisely in the subdir src/modules/systray. -- Massimo Maiurana Ragusa (RG) -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users