Re: More Eric7 Windows weirdness
FWIW, I checked the '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini file and found the following entry: QtToolsDir=C:\\Users\\jamie\\eric7_pyqt5_venv\\Lib\\site-packages\\PyQt5 I assume that is incorrect? - jamie On Tue, Nov 28, 2023 at 8:29 AM Jamie Riotto wrote: > Thanks, got it about PyQt6 projects and resources. > However, I also have some older PyQt5 projects. When I open them with > Eric7 (installed in virtual env: > C:/user/Jamie/eric7_venv), everything works fine, except that I don't get > QtDesigner popping up when > I click on a UI file under the forms tab. I assume I haven't correctly set > the > "Settings/Configure Qt/PyQt5/Tool Directory" parameter. Where would I > point to for a "eric7_venv" environment? > > Also the "Virtual Environment" drop-down in the same settings category > doesn't show any choices. Do I have to > add a Virtual Environment pointer somewhere else? > > Thanks - jamie > > On Mon, Nov 20, 2023 at 11:59 PM Detlev Offenbach < > [email protected]> wrote: > >> Hi Jaime, >> >> the fact you don't see the 'Resources' tab leads me to assume, you are >> working with a project of type 'PyQt6'. As PyQt6 does not support resources >> anymore (i.e. it doesn't have a 'pyrcc6' executable anymore) the respective >> tab is hidden for such projects. >> >> Which icons have disappeared? If you are talking about the eric icons >> please check, what the 'Icons' configuration page tells you (including the >> icons preview). >> >> Regards, >> Detlev >> Am 21.11.23 um 00:51 schrieb Jamie Riotto: >> >> Almost all there. After my mega-clean install, I can't seem to see any >> resource management. That is, >> in the tab bar above the Project Management File viewer, I see tabs for >> 'Sources', 'Forms', 'Translations, and 'Others', >> but no tab for resources, and It appears as if my icons have disappeared >> from the app. However when I look at the >> .ui files in Designer (started through eric), I see the icons ok, and >> pressing ctrl-R shows them in the preview. >> >> What do I need to do to re-enable the resource system on my new install? >> Thanks - jamie >> >> On Mon, Nov 20, 2023 at 10:56 AM Jamie Riotto >> wrote: >> >>> Ok, taking a deep dive into my file structure, I noticed I had Eric7 >>> directories under my system Python directory (no doubt from >>> old source installs), as well as some of the confusing references in the >>> eric7 ini file you pointed out. So, I removed all eric7 >>> directories and references I could find and did another clean install >>> into a venv. Everything comes up working great! >>> >>> Thanks for all your help - jamie >>> >>> On Mon, Nov 20, 2023 at 12:48 AM Detlev Offenbach < >>> [email protected]> wrote: >>> Hi Jamie, I saw these entries in your .ini file which you should consider changing. 1. The Python interpreter for the debugger is set to 'pythonw.exe'. This should be changed to 'python.exe' because 'pythonw.exe' is only meant for GUI scripts. The debugger backend (aka. debug client) is a console script to be used with 'python.exe'. 2. Is it correct, that you are using the debug client with Python 2? Note that Python 2 is obsolete! 3. The 'Multi Process Debugging' option of the 'Start' dialog should only be activated, when a multiprocess program is debugged. However, this will not cause the described behavior. Other than that the file looks good. Regards, Detlev Am 19.11.23 um 19:59 schrieb Jamie Riotto: Detlev, Attached is the eri7.ini file. I'll try the --debug flag now. - jamie On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach < [email protected]> wrote: > Hi Jaimie, > > I just fired up my Windows 10 VM and everything is working fine. Can > you > send the configuration file > '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in > your > configuration is weird and needs some special handling. In addition to > that you could start 'eric7_ide' in a console window with the > '--debug' > switch. > > Regards, > Detlev > > Am 19.11.23 um 16:03 schrieb Jamie Riotto: > > Ok, still having issues with Eric7. Just did a clean install into a > > venv with: > > > > python3 -m venv eric7_venv > > cd eric7_venv > > cd Scripts > > activate > > python.exe -m pip install --upgrade pip > > python.exe -m pip install --prefer-binary eric-ide > > > > When I start Eric, it went through all the init screens, i.e. > > PyInstaller, Rope, PyLint, Vulture, etc > > and then the main app started. It took 2 full minutes to go from a > > white screen with 'Eric7' in the > > upper left corner to the app loading. Ok, perhaps it was still > > initializing stuff. However, I > > just loaded a project and it has been 10 minutes with no r
Re: More Eric7 Windows weirdness
Thanks, got it about PyQt6 projects and resources. However, I also have some older PyQt5 projects. When I open them with Eric7 (installed in virtual env: C:/user/Jamie/eric7_venv), everything works fine, except that I don't get QtDesigner popping up when I click on a UI file under the forms tab. I assume I haven't correctly set the "Settings/Configure Qt/PyQt5/Tool Directory" parameter. Where would I point to for a "eric7_venv" environment? Also the "Virtual Environment" drop-down in the same settings category doesn't show any choices. Do I have to add a Virtual Environment pointer somewhere else? Thanks - jamie On Mon, Nov 20, 2023 at 11:59 PM Detlev Offenbach wrote: > Hi Jaime, > > the fact you don't see the 'Resources' tab leads me to assume, you are > working with a project of type 'PyQt6'. As PyQt6 does not support resources > anymore (i.e. it doesn't have a 'pyrcc6' executable anymore) the respective > tab is hidden for such projects. > > Which icons have disappeared? If you are talking about the eric icons > please check, what the 'Icons' configuration page tells you (including the > icons preview). > > Regards, > Detlev > Am 21.11.23 um 00:51 schrieb Jamie Riotto: > > Almost all there. After my mega-clean install, I can't seem to see any > resource management. That is, > in the tab bar above the Project Management File viewer, I see tabs for > 'Sources', 'Forms', 'Translations, and 'Others', > but no tab for resources, and It appears as if my icons have disappeared > from the app. However when I look at the > .ui files in Designer (started through eric), I see the icons ok, and > pressing ctrl-R shows them in the preview. > > What do I need to do to re-enable the resource system on my new install? > Thanks - jamie > > On Mon, Nov 20, 2023 at 10:56 AM Jamie Riotto > wrote: > >> Ok, taking a deep dive into my file structure, I noticed I had Eric7 >> directories under my system Python directory (no doubt from >> old source installs), as well as some of the confusing references in the >> eric7 ini file you pointed out. So, I removed all eric7 >> directories and references I could find and did another clean install >> into a venv. Everything comes up working great! >> >> Thanks for all your help - jamie >> >> On Mon, Nov 20, 2023 at 12:48 AM Detlev Offenbach < >> [email protected]> wrote: >> >>> Hi Jamie, >>> >>> I saw these entries in your .ini file which you should consider changing. >>> >>>1. The Python interpreter for the debugger is set to 'pythonw.exe'. >>>This should be changed to 'python.exe' because 'pythonw.exe' is only >>> meant >>>for GUI scripts. The debugger backend (aka. debug client) is a console >>>script to be used with 'python.exe'. >>>2. Is it correct, that you are using the debug client with Python 2? >>>Note that Python 2 is obsolete! >>>3. The 'Multi Process Debugging' option of the 'Start' dialog should >>>only be activated, when a multiprocess program is debugged. However, this >>>will not cause the described behavior. >>> >>> Other than that the file looks good. >>> >>> Regards, >>> Detlev >>> Am 19.11.23 um 19:59 schrieb Jamie Riotto: >>> >>> Detlev, >>> Attached is the eri7.ini file. I'll try the --debug flag now. >>> - jamie >>> >>> >>> >>> On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach < >>> [email protected]> wrote: >>> Hi Jaimie, I just fired up my Windows 10 VM and everything is working fine. Can you send the configuration file '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your configuration is weird and needs some special handling. In addition to that you could start 'eric7_ide' in a console window with the '--debug' switch. Regards, Detlev Am 19.11.23 um 16:03 schrieb Jamie Riotto: > Ok, still having issues with Eric7. Just did a clean install into a > venv with: > > python3 -m venv eric7_venv > cd eric7_venv > cd Scripts > activate > python.exe -m pip install --upgrade pip > python.exe -m pip install --prefer-binary eric-ide > > When I start Eric, it went through all the init screens, i.e. > PyInstaller, Rope, PyLint, Vulture, etc > and then the main app started. It took 2 full minutes to go from a > white screen with 'Eric7' in the > upper left corner to the app loading. Ok, perhaps it was still > initializing stuff. However, I > just loaded a project and it has been 10 minutes with no response. > That is, spinning wait cursor, > window is grayed out... > > This is a windows 10 system. A different venv with Eric6 behaves normally. > Do you need any info on my side to help debug this? Thanks again - jamie -- Detlev Offenbach [email protected] -- >>> Detlev [email protected] >>> >>> -- > Detlev [email protected] > >
Re: More Eric7 Windows weirdness
Hi Jaime, the fact you don't see the 'Resources' tab leads me to assume, you are working with a project of type 'PyQt6'. As PyQt6 does not support resources anymore (i.e. it doesn't have a 'pyrcc6' executable anymore) the respective tab is hidden for such projects. Which icons have disappeared? If you are talking about the eric icons please check, what the 'Icons' configuration page tells you (including the icons preview). Regards, Detlev Am 21.11.23 um 00:51 schrieb Jamie Riotto: Almost all there. After my mega-clean install, I can't seem to see any resource management. That is, in the tab bar above the Project Management File viewer, I see tabs for 'Sources', 'Forms', 'Translations, and 'Others', but no tab for resources, and It appears as if my icons have disappeared from the app. However when I look at the .ui files in Designer (started through eric), I see the icons ok, and pressing ctrl-R shows them in the preview. What do I need to do to re-enable the resource system on my new install? Thanks - jamie On Mon, Nov 20, 2023 at 10:56 AM Jamie Riotto wrote: Ok, taking a deep dive into my file structure, I noticed I had Eric7 directories under my system Python directory (no doubt from old source installs), as well as some of the confusing references in the eric7 ini file you pointed out. So, I removed all eric7 directories and references I could find and did another clean install into a venv. Everything comes up working great! Thanks for all your help - jamie On Mon, Nov 20, 2023 at 12:48 AM Detlev Offenbach wrote: Hi Jamie, I saw these entries in your .ini file which you should consider changing. 1. The Python interpreter for the debugger is set to 'pythonw.exe'. This should be changed to 'python.exe' because 'pythonw.exe' is only meant for GUI scripts. The debugger backend (aka. debug client) is a console script to be used with 'python.exe'. 2. Is it correct, that you are using the debug client with Python 2? Note that Python 2 is obsolete! 3. The 'Multi Process Debugging' option of the 'Start' dialog should only be activated, when a multiprocess program is debugged. However, this will not cause the described behavior. Other than that the file looks good. Regards, Detlev Am 19.11.23 um 19:59 schrieb Jamie Riotto: Detlev, Attached is the eri7.ini file. I'll try the --debug flag now. - jamie On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach wrote: Hi Jaimie, I just fired up my Windows 10 VM and everything is working fine. Can you send the configuration file '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your configuration is weird and needs some special handling. In addition to that you could start 'eric7_ide' in a console window with the '--debug' switch. Regards, Detlev Am 19.11.23 um 16:03 schrieb Jamie Riotto: > Ok, still having issues with Eric7. Just did a clean install into a > venv with: > > python3 -m venv eric7_venv > cd eric7_venv > cd Scripts > activate > python.exe -m pip install --upgrade pip > python.exe -m pip install --prefer-binary eric-ide > > When I start Eric, it went through all the init screens, i.e. > PyInstaller, Rope, PyLint, Vulture, etc > and then the main app started. It took 2 full minutes to go from a > white screen with 'Eric7' in the > upper left corner to the app loading. Ok, perhaps it was still > initializing stuff. However, I > just loaded a project and it has been 10 minutes with no response. > That is, spinning wait cursor, > window is grayed out... > > This is a windows 10 system. A different venv with Eric6 behaves normally. > Do you need any info on my side to help debug this? Thanks again - jamie -- Detlev Offenbach [email protected] -- Detlev Offenbach [email protected] -- Detlev Offenbach [email protected] OpenPGP_0xBD1F26A5DA8A6150.asc Description: OpenPGP public key OpenPGP_signature.asc Description: OpenPGP digital signature
Re: More Eric7 Windows weirdness
Almost all there. After my mega-clean install, I can't seem to see any resource management. That is, in the tab bar above the Project Management File viewer, I see tabs for 'Sources', 'Forms', 'Translations, and 'Others', but no tab for resources, and It appears as if my icons have disappeared from the app. However when I look at the .ui files in Designer (started through eric), I see the icons ok, and pressing ctrl-R shows them in the preview. What do I need to do to re-enable the resource system on my new install? Thanks - jamie On Mon, Nov 20, 2023 at 10:56 AM Jamie Riotto wrote: > Ok, taking a deep dive into my file structure, I noticed I had Eric7 > directories under my system Python directory (no doubt from > old source installs), as well as some of the confusing references in the > eric7 ini file you pointed out. So, I removed all eric7 > directories and references I could find and did another clean install into > a venv. Everything comes up working great! > > Thanks for all your help - jamie > > On Mon, Nov 20, 2023 at 12:48 AM Detlev Offenbach < > [email protected]> wrote: > >> Hi Jamie, >> >> I saw these entries in your .ini file which you should consider changing. >> >>1. The Python interpreter for the debugger is set to 'pythonw.exe'. >>This should be changed to 'python.exe' because 'pythonw.exe' is only meant >>for GUI scripts. The debugger backend (aka. debug client) is a console >>script to be used with 'python.exe'. >>2. Is it correct, that you are using the debug client with Python 2? >>Note that Python 2 is obsolete! >>3. The 'Multi Process Debugging' option of the 'Start' dialog should >>only be activated, when a multiprocess program is debugged. However, this >>will not cause the described behavior. >> >> Other than that the file looks good. >> >> Regards, >> Detlev >> Am 19.11.23 um 19:59 schrieb Jamie Riotto: >> >> Detlev, >> Attached is the eri7.ini file. I'll try the --debug flag now. >> - jamie >> >> >> >> On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach < >> [email protected]> wrote: >> >>> Hi Jaimie, >>> >>> I just fired up my Windows 10 VM and everything is working fine. Can you >>> send the configuration file >>> '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your >>> configuration is weird and needs some special handling. In addition to >>> that you could start 'eric7_ide' in a console window with the '--debug' >>> switch. >>> >>> Regards, >>> Detlev >>> >>> Am 19.11.23 um 16:03 schrieb Jamie Riotto: >>> > Ok, still having issues with Eric7. Just did a clean install into a >>> > venv with: >>> > >>> > python3 -m venv eric7_venv >>> > cd eric7_venv >>> > cd Scripts >>> > activate >>> > python.exe -m pip install --upgrade pip >>> > python.exe -m pip install --prefer-binary eric-ide >>> > >>> > When I start Eric, it went through all the init screens, i.e. >>> > PyInstaller, Rope, PyLint, Vulture, etc >>> > and then the main app started. It took 2 full minutes to go from a >>> > white screen with 'Eric7' in the >>> > upper left corner to the app loading. Ok, perhaps it was still >>> > initializing stuff. However, I >>> > just loaded a project and it has been 10 minutes with no response. >>> > That is, spinning wait cursor, >>> > window is grayed out... >>> > >>> > This is a windows 10 system. A different venv with Eric6 behaves >>> normally. >>> > Do you need any info on my side to help debug this? Thanks again - >>> jamie >>> >>> -- >>> Detlev Offenbach >>> [email protected] >>> >>> -- >> Detlev [email protected] >> >>
Re: More Eric7 Windows weirdness
Ok, taking a deep dive into my file structure, I noticed I had Eric7 directories under my system Python directory (no doubt from old source installs), as well as some of the confusing references in the eric7 ini file you pointed out. So, I removed all eric7 directories and references I could find and did another clean install into a venv. Everything comes up working great! Thanks for all your help - jamie On Mon, Nov 20, 2023 at 12:48 AM Detlev Offenbach wrote: > Hi Jamie, > > I saw these entries in your .ini file which you should consider changing. > >1. The Python interpreter for the debugger is set to 'pythonw.exe'. >This should be changed to 'python.exe' because 'pythonw.exe' is only meant >for GUI scripts. The debugger backend (aka. debug client) is a console >script to be used with 'python.exe'. >2. Is it correct, that you are using the debug client with Python 2? >Note that Python 2 is obsolete! >3. The 'Multi Process Debugging' option of the 'Start' dialog should >only be activated, when a multiprocess program is debugged. However, this >will not cause the described behavior. > > Other than that the file looks good. > > Regards, > Detlev > Am 19.11.23 um 19:59 schrieb Jamie Riotto: > > Detlev, > Attached is the eri7.ini file. I'll try the --debug flag now. > - jamie > > > > On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach > wrote: > >> Hi Jaimie, >> >> I just fired up my Windows 10 VM and everything is working fine. Can you >> send the configuration file >> '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your >> configuration is weird and needs some special handling. In addition to >> that you could start 'eric7_ide' in a console window with the '--debug' >> switch. >> >> Regards, >> Detlev >> >> Am 19.11.23 um 16:03 schrieb Jamie Riotto: >> > Ok, still having issues with Eric7. Just did a clean install into a >> > venv with: >> > >> > python3 -m venv eric7_venv >> > cd eric7_venv >> > cd Scripts >> > activate >> > python.exe -m pip install --upgrade pip >> > python.exe -m pip install --prefer-binary eric-ide >> > >> > When I start Eric, it went through all the init screens, i.e. >> > PyInstaller, Rope, PyLint, Vulture, etc >> > and then the main app started. It took 2 full minutes to go from a >> > white screen with 'Eric7' in the >> > upper left corner to the app loading. Ok, perhaps it was still >> > initializing stuff. However, I >> > just loaded a project and it has been 10 minutes with no response. >> > That is, spinning wait cursor, >> > window is grayed out... >> > >> > This is a windows 10 system. A different venv with Eric6 behaves >> normally. >> > Do you need any info on my side to help debug this? Thanks again - jamie >> >> -- >> Detlev Offenbach >> [email protected] >> >> -- > Detlev [email protected] > >
Re: More Eric7 Windows weirdness
Hi Jamie, I saw these entries in your .ini file which you should consider changing. 1. The Python interpreter for the debugger is set to 'pythonw.exe'. This should be changed to 'python.exe' because 'pythonw.exe' is only meant for GUI scripts. The debugger backend (aka. debug client) is a console script to be used with 'python.exe'. 2. Is it correct, that you are using the debug client with Python 2? Note that Python 2 is obsolete! 3. The 'Multi Process Debugging' option of the 'Start' dialog should only be activated, when a multiprocess program is debugged. However, this will not cause the described behavior. Other than that the file looks good. Regards, Detlev Am 19.11.23 um 19:59 schrieb Jamie Riotto: Detlev, Attached is the eri7.ini file. I'll try the --debug flag now. - jamie On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach wrote: Hi Jaimie, I just fired up my Windows 10 VM and everything is working fine. Can you send the configuration file '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your configuration is weird and needs some special handling. In addition to that you could start 'eric7_ide' in a console window with the '--debug' switch. Regards, Detlev Am 19.11.23 um 16:03 schrieb Jamie Riotto: > Ok, still having issues with Eric7. Just did a clean install into a > venv with: > > python3 -m venv eric7_venv > cd eric7_venv > cd Scripts > activate > python.exe -m pip install --upgrade pip > python.exe -m pip install --prefer-binary eric-ide > > When I start Eric, it went through all the init screens, i.e. > PyInstaller, Rope, PyLint, Vulture, etc > and then the main app started. It took 2 full minutes to go from a > white screen with 'Eric7' in the > upper left corner to the app loading. Ok, perhaps it was still > initializing stuff. However, I > just loaded a project and it has been 10 minutes with no response. > That is, spinning wait cursor, > window is grayed out... > > This is a windows 10 system. A different venv with Eric6 behaves normally. > Do you need any info on my side to help debug this? Thanks again - jamie -- Detlev Offenbach [email protected] -- Detlev Offenbach [email protected] OpenPGP_0xBD1F26A5DA8A6150.asc Description: OpenPGP public key OpenPGP_signature.asc Description: OpenPGP digital signature
Re: More Eric7 Windows weirdness
Am 19.11.23 um 20:08 schrieb Jamie Riotto: Ok, I ran 'eric7_ide.exe --debug' in a console window with the venv activated. I don't see anything on the console. That will not work because pip generated this wrapper for GUI scripts using pythonw.exe during installation. That Python interpreter variant doesn't give any output. You should run 'python.exe -m eric7 --debug'. Is there a log file or debug file that is generated? All debug output is sent to the console. - jamie On Sun, Nov 19, 2023 at 10:59 AM Jamie Riotto wrote: Detlev, Attached is the eri7.ini file. I'll try the --debug flag now. - jamie On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach wrote: Hi Jaimie, I just fired up my Windows 10 VM and everything is working fine. Can you send the configuration file '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your configuration is weird and needs some special handling. In addition to that you could start 'eric7_ide' in a console window with the '--debug' switch. Regards, Detlev Am 19.11.23 um 16:03 schrieb Jamie Riotto: > Ok, still having issues with Eric7. Just did a clean install into a > venv with: > > python3 -m venv eric7_venv > cd eric7_venv > cd Scripts > activate > python.exe -m pip install --upgrade pip > python.exe -m pip install --prefer-binary eric-ide > > When I start Eric, it went through all the init screens, i.e. > PyInstaller, Rope, PyLint, Vulture, etc > and then the main app started. It took 2 full minutes to go from a > white screen with 'Eric7' in the > upper left corner to the app loading. Ok, perhaps it was still > initializing stuff. However, I > just loaded a project and it has been 10 minutes with no response. > That is, spinning wait cursor, > window is grayed out... > > This is a windows 10 system. A different venv with Eric6 behaves normally. > Do you need any info on my side to help debug this? Thanks again - jamie -- Detlev Offenbach [email protected] -- Detlev Offenbach [email protected] OpenPGP_0xBD1F26A5DA8A6150.asc Description: OpenPGP public key OpenPGP_signature.asc Description: OpenPGP digital signature
Re: More Eric7 Windows weirdness
Ok, I ran 'eric7_ide.exe --debug' in a console window with the venv activated. I don't see anything on the console. Is there a log file or debug file that is generated? - jamie On Sun, Nov 19, 2023 at 10:59 AM Jamie Riotto wrote: > Detlev, > Attached is the eri7.ini file. I'll try the --debug flag now. > - jamie > > > > On Sun, Nov 19, 2023 at 7:57 AM Detlev Offenbach > wrote: > >> Hi Jaimie, >> >> I just fired up my Windows 10 VM and everything is working fine. Can you >> send the configuration file >> '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your >> configuration is weird and needs some special handling. In addition to >> that you could start 'eric7_ide' in a console window with the '--debug' >> switch. >> >> Regards, >> Detlev >> >> Am 19.11.23 um 16:03 schrieb Jamie Riotto: >> > Ok, still having issues with Eric7. Just did a clean install into a >> > venv with: >> > >> > python3 -m venv eric7_venv >> > cd eric7_venv >> > cd Scripts >> > activate >> > python.exe -m pip install --upgrade pip >> > python.exe -m pip install --prefer-binary eric-ide >> > >> > When I start Eric, it went through all the init screens, i.e. >> > PyInstaller, Rope, PyLint, Vulture, etc >> > and then the main app started. It took 2 full minutes to go from a >> > white screen with 'Eric7' in the >> > upper left corner to the app loading. Ok, perhaps it was still >> > initializing stuff. However, I >> > just loaded a project and it has been 10 minutes with no response. >> > That is, spinning wait cursor, >> > window is grayed out... >> > >> > This is a windows 10 system. A different venv with Eric6 behaves >> normally. >> > Do you need any info on my side to help debug this? Thanks again - jamie >> >> -- >> Detlev Offenbach >> [email protected] >> >>
Re: More Eric7 Windows weirdness
Hi Jaimie, I just fired up my Windows 10 VM and everything is working fine. Can you send the configuration file '%USERPROFILE%\AppData\Roaming\Eric7\eric7.ini'? Maybe something in your configuration is weird and needs some special handling. In addition to that you could start 'eric7_ide' in a console window with the '--debug' switch. Regards, Detlev Am 19.11.23 um 16:03 schrieb Jamie Riotto: Ok, still having issues with Eric7. Just did a clean install into a venv with: python3 -m venv eric7_venv cd eric7_venv cd Scripts activate python.exe -m pip install --upgrade pip python.exe -m pip install --prefer-binary eric-ide When I start Eric, it went through all the init screens, i.e. PyInstaller, Rope, PyLint, Vulture, etc and then the main app started. It took 2 full minutes to go from a white screen with 'Eric7' in the upper left corner to the app loading. Ok, perhaps it was still initializing stuff. However, I just loaded a project and it has been 10 minutes with no response. That is, spinning wait cursor, window is grayed out... This is a windows 10 system. A different venv with Eric6 behaves normally. Do you need any info on my side to help debug this? Thanks again - jamie -- Detlev Offenbach [email protected] OpenPGP_0xBD1F26A5DA8A6150.asc Description: OpenPGP public key OpenPGP_signature.asc Description: OpenPGP digital signature
