https://insideevs.com/news/357824/plastic-electric-motor-reduces-weight/ Plastic Electric Motor May Help EVs Reduce Weight Jul 04, 2019 Gustavo Henrique Ruffo
[image https://cdn.motor1.com/images/mgl/r0XjX/s1/german-research-institute-develops-plastic-electric-motor.jpg Rectangular flat wire replaces round wire https://cdn.motor1.com/images/mgl/Q24rZ/s1/german-research-institute-develops-plastic-electric-motor.jpg German Research Institute Develops Plastic Electric Motor video https://youtu.be/hpbdUgns320 Direktgekühlter Elektromotor aus Kunststoff (Direct-cooled electric motor made of plastic) ] Developed by the Fraunhofer Institute for Chemical Technology, it is also cheaper to build. Mass, aerodynamics, and powertrain efficiency are the three pillars of a more efficient combustion engine vehicle. Although electric cars already have the most energy-efficient engine man has ever created, it also pursues low weight. And more aerodynamic designs, as pop-out door handles and cameras instead of rear-view mirrors clearly demonstrate. But they also have room for improvement. Curiously, one of these opportunities has been found on the most unlikely element: the electric motor. What if its housing is made of plastic in place of metal? This is what the Fraunhofer Institute for Chemical Technology (ICT) and the Karlsruhe Institute of Technology (KIT) have recently proposed in Germany. “An electric motor consists of a rotating rotor and a static stator. The stator contains the copper windings that the electricity flows through – and this is where the majority of electrical losses occur”, says Robert Maertens, a researcher at Fraunhofer ICT. Maertens refers to the 10 percent of losses that happen through the heat in an electric motor. This is why electric cars are so efficient: 90 percent of the electric energy becomes movement, while the very best combustion engines can only turn 40 percent of the chemical energy contained in fuels to work. The new motor addresses the 10 percent of losses in current projects. In order not to overheat, these motors present a metal housing that guides the generated heat to a cooling sleeve, also made of metal. The Fraunhofer engine uses rectangular flat wires around the stators instead of the round wires used nowadays. That saves space for cooling channels close to the stators. “In this optimized design, the heat losses can be dissipated through the cooling channel inside the stator, eliminating the need to transport the heat through the metal housing to an exterior cooling sleeve”, says the researcher, who also points to other advantages, such as lower thermal inertia, what means it can cool down much faster, and higher continuous output, something that does not need any explanation. The rotor also has a cooling solution in this project. According to the researchers, prototypes take only four minutes to be built. And mass-production will be relatively easy to achieve. In what relates to the cooling process, it prevents 80 percent of the 10 percent of losses. That alone increases the electric motor efficiency to 98 percent, but the researchers believe they can make the 20 percent left, or 2 percent of total losses, be lower still by optimizing the flow of coolant. If these motors prove to be as reliable as the ones with metal housing, we will soon get lighter, cheaper and more efficient vehicles. It is just a matter of waiting for solid-state batteries to become a reality to have a quantum leap regarding EVs. In all aspects. press release Novel cooling concept for eco-friendly mobility Directly-cooled electric motor made from polymer materials Making electric cars lighter also involves reducing the weight of the motor. One way to do that is by constructing it from fiber-reinforced polymer materials. Researchers at the Fraunhofer Institute for Chemical Technology ICT are working together with the Karlsruhe Institute of Technology KIT to develop a new cooling concept that will enable polymers to be used as motor housing materials. And that’s not the only advantage of the new cooling concept: it also significantly increases the power density and efficiency of the motor compared to the state of the art. The two key components of an electric drive train are the electric motor and the battery. And there are three issues that play a particularly important role when it comes to using an electric motor for eco-friendly mobility: high power density, a compact configuration that fits snugly within the electric vehicle, and high levels of efficiency. As part of the DEmiL project – a German abbreviation that stands for directly-cooled electric motor with integrated lightweight housing – researchers at Fraunhofer ICT in Pfinztal are now working with the Institute of Vehicle System Technology (FAST) and the Institute of Electrical Engineering (ETI) at Karlsruhe Institute of Technology KIT to develop a novel approach that incorporates direct cooling of the stator and rotor. “An electric motor consists of a rotating rotor and a static stator. The stator contains the copper windings that the electricity flows through – and this is where the majority of electrical losses occur. The novel aspects of our new concept lie in the stator,” says Robert Maertens, a researcher at Fraunhofer ICT. Electric motors have a high efficiency of over 90 percent, which means that a high proportion of the electrical energy is converted into mechanical energy. The remaining 10 percent or so of the electrical energy is lost in the form of heat. To prevent the motor from overheating, the heat in the stator is currently conducted through a metal housing to a cooling sleeve filled with cold water. In this project, the team of researchers have replaced the round wire with rectangular flat wire that can be wound more tightly in the stator. This creates more space for the cooling channel next to the flat wire winding phases. “In this optimized design, the heat losses can be dissipated through the cooling channel inside the stator, eliminating the need to transport the heat through the metal housing to an exterior cooling sleeve. In fact, you no longer need a cooling sleeve at all in this concept. It offers other benefits, too, including lower thermal inertia and higher continuous output from the motor,” says Maertens, explaining some of the advantages of the new system. In addition, the new design incorporates a rotor cooling solution that also allows the rotor’s heat loss to be dissipated directly within the motor. By dissipating the heat close to where it is generated, the project partners were able to construct the entire motor and housing from polymer materials, leading to further advantages. “Polymer housings are lightweight and easier to produce than aluminum housings. They also lend themselves to complex geometries without requiring post-processing, so we made some real savings on overall weight and cost,” Maertens says. The metal currently required as a heat conductor can be replaced by polymer materials, which have a low thermal conductivity compared to metals. The project partners chose to use fiber-reinforced, thermosetting plastics of their project partner SBHPP that offer high temperature resistance and high resistance to aggressive coolants. Unlike thermoplastics, thermosets do not swell when they come into contact with chemicals. Suitable for large series production The polymer housing is produced in an automated injection molding process using the phenolic molding compound Vyncolit X7700. The cycle time for manufacturing the prototypes is currently four minutes. The stators themselves are overmolded with a thermally conductive epoxy resin molding compound (Sumikon EME-A730E) in a transfer molding process. The team of researchers chose a design and manufacturing process for the electric motor that will allow it to be mass-produced. The team has already completed the stator assembly and experimentally validated the cooling concept. "We used an electrical current to introduce the amount of heat in the copper windings that would be generated in real operation according to the simulation. We found that we can already dissipate over 80 percent of the expected heat losses. And we already have some promising approaches for dealing with the remaining heat losses of just under 20 percent, for example by optimizing the flow of coolant. We are now at the stage of assembling the rotors and will soon be able to operate the motor on the test bench at the Institute of Electrical Engineering and validate it in real operation,” says Maertens, summing up the project’s current status. [© insideevs.com] + https://www.washingtonpost.com/business/economy/2019/06/07/80a06794-8649-11e9-a491-25df61c78dc4_story.html China hints it will choke off U.S. ‘rare earths’ access. But it’s not that easy. June 10, 2019 ... Mountain Pass, the only mine in the United States that harvests rare-earth elements, the raw ingredients used to ... https://www.washingtonpost.com/resizer/CyypxTiKLkiiDh5xQlJilfIp69U=/1484x0/arc-anglerfish-washpost-prod-washpost.s3.amazonaws.com/public/HDBQVUEEMQI6TNMF4NVRNJJRVI.jpg For EVLN EV-newswire posts use: http://evdl.org/archive/ {brucedp.neocities.org} -- Sent from: http://electric-vehicle-discussion-list.413529.n4.nabble.com/ _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
