Send EV mailing list submissions to ev@lists.sjsu.edu To subscribe or unsubscribe via the World Wide Web, visit http://lists.sjsu.edu/mailman/listinfo/ev or, via email, send a message with subject or body 'help' to [EMAIL PROTECTED]
You can reach the person managing the list at [EMAIL PROTECTED] When replying, please edit your Subject line so it is more specific than "Re: Contents of EV digest..." Today's Topics: 1. Re: Booted again (Tim Clevenger) 2. Re: Battery Desulfators (Lee Hart) 3. Re: EV Digest, Vol 2, Issue 53 (Martin Klingensmith) 4. Re: S10 at the Scotsdale Pavillions Sept.22 (Rush) 5. Determining whether you're subscribed to EVDL (David Roden) 6. Re: S10 at the Scotsdale Pavillions Sept.22 ([EMAIL PROTECTED]) 7. Re: Battery Desulfators (Roland Wiench) 8. Minimoto 7 plug 55amp controller (Lawrence Rhodes) 9. Re: EV Digest, Vol 2, Issue 53 ([EMAIL PROTECTED]) 10. Miles ZX40s (Peri Hartman) 11. Re: Miles ZX40s ([EMAIL PROTECTED]) 12. Re: Miles ZX40s (David Roden) 13. Re: Resting voltage for Odyssey PC680? (Robert Salem) 14. Re: Miles ZX40s (Cor van de Water) 15. Re: Electric Barstool sets Land Speed Record! (Roderick Wilde) 16. Re: Resting voltage for Odyssey PC680? (Ryan Stotts) 17. Re: Electric Barstool sets Land Speed Record! (Roy LeMeur) 18. Re: Shunts revisited (Jack Murray) 19. PFC Charger/Regulator behavior (John G. Lussmyer) 20. Breaking in some new batteries (John G. Lussmyer) 21. Re: List is Back? (Joseph T. ) 22. Re: S10 at the Scotsdale Pavillions Sept.22 (Rush) 23. Re: PFC Charger/Regulator behavior (Ralph Merwin) 24. Calling any EV owners in the Bay Area, SF (Nikki Bloomfield) 25. Re: Contactors, Fuses and Circuit Breakers (Ian Hooper) 26. A123 M1 Capacity question (Dominant) 27. Re: A123 M1 Capacity question (Ted Sanders) 28. Re: Resting voltage for Odyssey PC680? ([EMAIL PROTECTED]) 29. Re: Electric Barstool sets Land Speed Record! ([EMAIL PROTECTED]) 30. Re: A123 M1 Capacity question (Dan Frederiksen) 31. Re: K and W Chargers an' Stuff (Larry Cronk) 32. Re: A123 M1 Capacity question (Joseph T. ) 33. Adding ceramic heater to Cabriolet (Deanne Mott) 34. Re: Adding ceramic heater to Cabriolet (Dan Frederiksen) 35. Re: A123 M1 Capacity question (Dmitri) ---------------------------------------------------------------------- Message: 1 Date: Sat, 22 Sep 2007 12:02:53 -0700 From: "Tim Clevenger" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Booted again To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1 Just FYI, I get digests on my GMail account, and no problems at all; all of them have gone to my inbox. I also don't see a bounce score in my options, so I assume it's zero. Tim ---- Date: Thu, 20 Sep 2007 23:28:07 -0400 From: "David Roden (Akron OH USA)" < [EMAIL PROTECTED]> Subject: Re: [EVDL] Booted again To: Electric Vehicle Discussion List < ev@lists.sjsu.edu> BTW, I just checked my test EVDL account on Yahoo. I have a few missing digests from earlier this month - on the 9th, 12th, and 14th. My bounce score is also 5.0 out of 10.0. This suggests that Yahoo may indeed be having some mail server problems. If you'd like to check your bounce score, log in here : http://lists.sjsu.edu/mailman/options/ev David Roden EVDL Administrator http://www.evdl.org/ ------------------------------ Message: 2 Date: Sat, 22 Sep 2007 14:23:00 -0500 From: Lee Hart <[EMAIL PROTECTED]> Subject: Re: [EVDL] Battery Desulfators To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hunter Cook wrote: > The one thing I'd ask, though, is whether you think this is total > "snake oil" as you say, or just something that well-cared-for > batteries shouldn't need? If living in this modern media-saturated world teaches us anything, it's that advertising is full of BS (Baloney Sandwich filling :-). A given device may or may not work -- but the advertising for it is *totally unreliable* as a source of information! These battery desulfators are particularly bad in this regard. Their descriptions of how they work are junk science. They give testimonials from unknown or anonymous users instead of verifiable test data. The device may be a good charger, or a bad one -- but you sure can't tell from their advertising! > So in other words, do you see value in this device for batteries that > have been abused? Frankly, there is no way to know except to test it. And to do a proper test, you need to measure what it ACTUALLY does. I've done this a number of times on various battery chargers and other devices that claim to desulfate or rejuvenate a battery. Some of them actually work -- basically, because they are a perfectly normal battery charger, recharging a perfectly normal battery. The "desulfation" claims are just marketing nonsense to get you to buy the product. All they actually do is what is more properly called "equalization" -- a long slow charge that provides enough total amphours to fully recharge all the cells, without overdoing it to the point where it causes further damage. The worst of the devices do nothing at all. But, the instructions for using them tell you to do a normal charge and discharge cycle to "test" the rejuvenated battery. It is this normal charge/discharge cycle that actually does the work! -- Ring the bells that still can ring Forget the perfect offering There is a crack in everything That's how the light gets in -- Leonard Cohen -- Lee A. Hart, 814 8th Ave N, Sartell MN 56377, leeahart_at_earthlink.net ------------------------------ Message: 3 Date: Sat, 22 Sep 2007 14:46:03 -0400 From: Martin Klingensmith <[EMAIL PROTECTED]> Subject: Re: [EVDL] EV Digest, Vol 2, Issue 53 To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1 Tim, I agree, it's not like he got drunk with his buddy and decided to trim his hedge with the riding lawnmower (cut their fingers off..) He was riding a well-engineered machine and did as it was designed to do - accelerate very rapidly! I'm not usually the guy to say so, but it sounds like it being electric has got a lot of people talking about it more. -- Martin K Tim Humphrey wrote: > > I completely disagree that it was "classic Darwin". > > Darwin is all about dumb-phukkers doing exactly as you would predict they'd > do and getting bit by their stupid self. > > Bill is in no way a dumb-phukker, and no-one would have ever predicted that > *he* would have attempted such a dumb-phukker act. > > > -- > Stay Charged! > Hump > G.E. I-5, Blossvale NY > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 4 Date: Sat, 22 Sep 2007 11:29:39 -0700 From: "Rush" <[EMAIL PROTECTED]> Subject: Re: [EVDL] S10 at the Scotsdale Pavillions Sept.22 To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Hey Dennis, I'll be up to see you. Rush ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <ev@lists.sjsu.edu> Sent: Friday, September 21, 2007 2:39 PM Subject: [EVDL] S10 at the Scotsdale Pavillions Sept.22 >I will have my S 87 10 Street/Strip at the Pavilions on sat. Night from 430 > to 930 PM. Its an open house so to speak with everything exposed. A true > 12 > second electric truck with now almost 500 miles of street peeling fun and > 1.75 > miles of qt. mile fun. See ya there. Dennis Berube > > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.488 / Virus Database: 269.13.28/1021 - Release Date: > 9/21/2007 2:02 PM > > ------------------------------ Message: 5 Date: Sat, 22 Sep 2007 16:05:03 -0400 From: "David Roden" <[EMAIL PROTECTED]> Subject: [EVDL] Determining whether you're subscribed to EVDL To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=US-ASCII On 22 Sep 2007 at 12:14, [EMAIL PROTECTED] wrote: > is there an easy > way for people to check if they got unsubscribed? Go here : http://lists.sjsu.edu/mailman/options/ev Enter the mail address you use for the EVDL. You'll need your password to log in (it was in the welcome message you received when you subscribed - you DID save that message, no? ;-). If you don't have your password, never fear; just scroll to the bottom and click Remind. The page will tell you that your password has been mailed to you. If you don't have web access at that moment, instead of using the webpage above, you can email a message with the subject password to the address [EMAIL PROTECTED] In the message body, type end The message must be sent from the same mail account with which you're (supposedly) subscribed to the EVDL. Whichever method you use, check your email for your password. It should arrive within a minute or two. If you DON'T receive your password, the most likely reason is that you're NOT subscribed. (Mailman apparently doesn't check whether your address is subscribed until AFTER it's already cheerfully told you it's mailed you your password.) The old list manager, Listproc, returned a "You are not subscribed" message when a nonsubscriber queried it. But Mailman is different; if you're not subscribed and you request your password, it just ignores you. If you DO receive your password, use it to log in and check your subscription settings. The top of the page will tell you what your bounce score is (if any) and warn you if you've been suspended. Further down the page you'll find the option to enable or disable mail delivery. It's the first item under "Your EV Subscription Options." That's where you reset your account if it's been disabled because of bounces. David Roden - Akron, Ohio, USA EVDL Administrator = = = = = = = = = = = = = = = = = = = = = = = = = = = = = EVDL Information: http://www.evdl.org/help/ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Note: mail sent to "evpost" or "etpost" addresses will not reach me. To send a private message, please obtain my email address from the webpage http://www.evdl.org/help/ . = = = = = = = = = = = = = = = = = = = = = = = = = = = = = ------------------------------ Message: 6 Date: Sat, 22 Sep 2007 16:11:37 EDT From: [EMAIL PROTECTED] Subject: Re: [EVDL] S10 at the Scotsdale Pavillions Sept.22 To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="US-ASCII" In a message dated 9/22/2007 12:46:39 PM US Mountain Standard Time, [EMAIL PROTECTED] writes: > ns Sept.22 > Date:9/22/2007 12:46:39 PM US Mountain Standard Time > From:[EMAIL PROTECTED] > Reply-to:ev@lists.sjsu.edu > To:ev@lists.sjsu.edu > Received from Internet: > > > > Hey Dennis, > > I'll be up to see you. > > Rush > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <ev@lists.sjsu.edu> > Sent: Friday, September 21, 2007 2:39 PM > Subject: [EVDL] S10 at the Scotsdale Pavillions Sept.22 > > > >I will have my S 87 10 Street/Strip at the Pavilions on sat. Night from 430 > >to 930 PM. Its an open house so to speak with everything exposed. A true > >12 > >second electric truck with now almost 500 miles of street peeling fun and > >1.75 > >miles of qt. mile fun. See ya there. Dennis Berube > > It is now raining at the Pavillions so with a 50% chance we are canceling our show tonight but considering next sat. night.We also got winded and rained off the track last night.We were going to turn things up a bit to try for the very low 12s. Dennis Berube ------------------------------ Message: 7 Date: Sat, 22 Sep 2007 14:36:00 -0600 From: "Roland Wiench" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Battery Desulfators To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" Sometime ago, I bought a Schumacher Smart charger Model WM-1000A to be use as a charger for regular automotive lead-acid, AGM, gel cells, deep cycle, and use as a maintainer which has digital read outs. I use one on board to maintain the on board 12 volt battery. It can be use on 12, 8 or 6 volt batteries. I have tap off leads to a chassis board panel receptacle where I can plug in battery leads to balance charge the 6 volt batteries as required. I have another out board one I use for the shop. One day I brought out a high performance engine I had in storage, which the battery from 1973 was still store with it, but was disconnected and was planning to replace it with a new one. The battery which is a Sears deep cycle Diehard, still turn over the engine, but quickly slow down, so I turn off the ignition. I place one of these smart chargers on this battery, and the digital display a voltage of about 10.2 volts. Turn the switch to the charge for a deep cycle and it commence to charge. The voltage readings quickly climb to 13.5 volts and then it increase to 15 volts, it then drops back down to about 14 volts and then goes up to 15.5 volts and repeat this cycle many times, and then it took the voltage to 18.2 volts and then drop the voltage to 14.5 and held it there for awhile and repeat that voltage increase to 18.2 volts many times. I was alarm at that high voltage, so I went and read the manual more closely, it states: The Schumacher SpeedCharger high frequency charger allows for faster charging by putting more amperage/current into a lead acid battery in a shorter period of time. The charger starts with the appropriate rate safety providing as much current as the battery will take, while automatically monitoring the charging conditions, avoiding gassing or overheating that may damage the battery. Then, it constantly adjusts the rate to effectively complete the charge. If necessary, the charger will desulphate/recondition the battery plates for better charge absorption. So when the voltage cycles from 18.2 volts to 14.5 volts several times and it waits, this must be the desulphation cycle they are talking about. I do not know. But the battery is still cranking over this engine which is very hard starting at times if everything is not tune right. My onboard 12 volt deep cycle battery in the EV which is use to run a DC-AC inverter, four fans and 2 pumps during the start up which could pull up to 100 amps starting. When the main motor reaches about 300 rpm, then the alternator-inverter kicks in providing the DC and AC current. One day I found that the on board battery went through this 14.5 to 18.2 volt cycle. This battery has about 8 years on it. Roland ----- Original Message ----- From: "Lee Hart" <[EMAIL PROTECTED]> To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Sent: Saturday, September 22, 2007 1:23 PM Subject: Re: [EVDL] Battery Desulfators > Frankly, there is no way to know except to test it. And to do a proper > test, you need to measure what it ACTUALLY does. > > I've done this a number of times on various battery chargers and other > devices that claim to desulfate or rejuvenate a battery. Some of them > actually work -- basically, because they are a perfectly normal battery > charger, recharging a perfectly normal battery. The "desulfation" claims > are just marketing nonsense to get you to buy the product. All they > actually do is what is more properly called "equalization" -- a long > slow charge that provides enough total amphours to fully recharge all > the cells, without overdoing it to the point where it causes further > damage. > > The worst of the devices do nothing at all. But, the instructions for > using them tell you to do a normal charge and discharge cycle to "test" > the rejuvenated battery. It is this normal charge/discharge cycle that > actually does the work! > > -- > Ring the bells that still can ring > Forget the perfect offering > There is a crack in everything > That's how the light gets in -- Leonard Cohen > -- > Lee A. Hart, 814 8th Ave N, Sartell MN 56377, leeahart_at_earthlink.net > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 8 Date: Sat, 22 Sep 2007 14:34:26 -0700 From: "Lawrence Rhodes" <[EMAIL PROTECTED]> Subject: [EVDL] Minimoto 7 plug 55amp controller To: <[EMAIL PROTECTED]>, "Electric Vehicle Discussion List" <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" I now know that the 55 amp controller I'm using for the 36v Izip project is used in Minimoto go carts. If anyone can hellp me reverse engineer the plug positions I'd be mighty apreciative. The website is of no use. Lawrence Rhodes.... ------------------------------ Message: 9 Date: Sat, 22 Sep 2007 17:19:27 -0500 From: [EMAIL PROTECTED] Subject: Re: [EVDL] EV Digest, Vol 2, Issue 53 To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii There's no such thing about bad press. OK, if it had been a story tied to a vehicle being tragically underpowered, that could be bad. Being a story about electricity being too much for him to handle is typically a good thing, unless you read it as "guy was so dumb he couldn't even handle a Power Wheels kid's toy without hurting himself". The circumstances do show enough about just how powerful it was to probably point to the first case fortunately. Danny ----- Original Message ----- From: Martin Klingensmith <[EMAIL PROTECTED]> Date: Saturday, September 22, 2007 2:28 pm Subject: Re: [EVDL] EV Digest, Vol 2, Issue 53 To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> > Tim, I agree, it's not like he got drunk with his buddy and decided to > trim his hedge with the riding lawnmower (cut their fingers off..) > He was riding a well-engineered machine and did as it was designed > to do > - accelerate very rapidly! I'm not usually the guy to say so, but it > sounds like it being electric has got a lot of people talking about > it more. > -- > Martin K > > Tim Humphrey wrote: > > > > > I completely disagree that it was "classic Darwin". > > > > Darwin is all about dumb-phukkers doing exactly as you would > predict they'd do and getting bit by their stupid self. > > > > Bill is in no way a dumb-phukker, and no-one would have ever > predicted that *he* would have attempted such a dumb-phukker act. > > > > > > -- > > Stay Charged! > > Hump > > G.E. I-5, Blossvale NY > > > > _______________________________________________ > > For subscription options, see > > http://lists.sjsu.edu/mailman/listinfo/ev > > > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 10 Date: Sat, 22 Sep 2007 18:56:53 -0700 From: "Peri Hartman" <[EMAIL PROTECTED]> Subject: [EVDL] Miles ZX40s To: "evdl" <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Hi, Does anyone have crash-test knowledge of the Miles ZX40s NEV (or other +/- information to share)? It is built from a chinese (I think) glider by a california company. They add lead-acid batteries, curtis controller, and a DC motor and limit it to 25mph. In Seattle, the local dealer, MC Electric, modifies the gear ratio to allow 35mph, per Washington state law. My biggest concern is safety. I can, perhaps, add some safety features, but first I would like to know to what level it has been safety tested. I have found internet sites proclaiming "IC Variant Crash Tested to EU Standards", whatever that means. Does anyone know? More information at: http://www.milesautomotive.com/showroom_zx40s.php Peri Hartman ------------------------------ Message: 11 Date: Sat, 22 Sep 2007 19:43:28 -0700 From: [EMAIL PROTECTED] Subject: Re: [EVDL] Miles ZX40s To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed" <<<< Does anyone have crash-test knowledge of the Miles ZX40s NEV (or other +/- information to share)? It is built from a chinese (I think) glider by a california company. They add lead-acid batteries, curtis controller, and a DC motor and limit it to 25mph. In Seattle, the local dealer, MC Electric, modifies the gear ratio to allow 35mph, per Washington state law. My biggest concern is safety. I can, perhaps, add some safety features, but first I would like to know to what level it has been safety tested. I have found internet sites proclaiming "IC Variant Crash Tested to EU Standards", whatever that means. Does anyone know? More information at: http://www.milesautomotive.com/showroom_zx40s.php >>>> You can boost a golf cart's top speed to 25mph add all the correct equipment (lights, horn, etc) and licensed it as an NEV, but it wouldn't fair well in *any* crash. I don't even know what NEV crash testing is done, but I doubt they are tested anywhere near that higher speed of 35mph. ------------------------------ Message: 12 Date: Sat, 22 Sep 2007 22:52:54 -0400 From: "David Roden" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Miles ZX40s To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=US-ASCII No NEV has anything like the passenger protection of a good sedan. They are probably more secure in that respect than a motorcycle, but of course they don't have the maneuverability (and accident avoidance potential) of a motorcycle. If collision protection is a concern, I'd say buy a recent compact sedan that has crash-tested reasonably well, and convert it. Modifying the structure to add batteries will probably have some effect on its crashworthiness, but if carefully done it won't be a dramatic effect. David Roden - Akron, Ohio, USA EVDL Administrator = = = = = = = = = = = = = = = = = = = = = = = = = = = = = EVDL Information: http://www.evdl.org/help/ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Note: mail sent to "evpost" or "etpost" addresses will not reach me. To send a private message, please obtain my email address from the webpage http://www.evdl.org/help/ . = = = = = = = = = = = = = = = = = = = = = = = = = = = = = ------------------------------ Message: 13 Date: Sat, 22 Sep 2007 22:35:32 -0400 From: Robert Salem <[EMAIL PROTECTED]> Subject: Re: [EVDL] Resting voltage for Odyssey PC680? To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I run Genesis Hawker G12v16Ah10EP. After a full charge they set at 13.05 volts After sitting a few days, 12.84 looks like a full charge. I always have leakage or controller drain. Can'say after a week what they look like ? Robert Salem 81 VW Pickup 240 volt, 11, Kostov, Z2K Ryan Stotts wrote: > Just got one brand new in the box. Opened it up and stuck a meter to > it. 12.87 V. What is the ideal voltage for it to be at if it's not > going to be used for a month or so? > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev ------------------------------ Message: 14 Date: Sat, 22 Sep 2007 20:08:22 -0700 From: "Cor van de Water" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Miles ZX40s To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" The shorthands probably stand for: "Industry Canada" variant tested to European Union standards (unspecified which standard). If you can find out where the glider comes from, you may be able to see to which level/standard it was originally tested and whether it was a (Chinese market) Freeway vehicle, or that it was designed as NEV from the beginning. Success with your research! Cor van de Water Systems Architect Proxim Wireless Corporation http://www.proxim.com Email: [EMAIL PROTECTED] Private: http://www.cvandewater.com Skype: cor_van_de_water IM: [EMAIL PROTECTED] Tel: +1 408 542 5225 VoIP: +31 20 3987567 FWD# 25925 Fax: +1 408 731 3675 eFAX: +31-87-784-1130 Second Life: www.secondlife.com/?u=3b42cb3f4ae249319edb487991c30acb -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peri Hartman Sent: Saturday, September 22, 2007 6:57 PM To: evdl Subject: [EVDL] Miles ZX40s Hi, Does anyone have crash-test knowledge of the Miles ZX40s NEV (or other +/- information to share)? It is built from a chinese (I think) glider by a california company. They add lead-acid batteries, curtis controller, and a DC motor and limit it to 25mph. In Seattle, the local dealer, MC Electric, modifies the gear ratio to allow 35mph, per Washington state law. My biggest concern is safety. I can, perhaps, add some safety features, but first I would like to know to what level it has been safety tested. I have found internet sites proclaiming "IC Variant Crash Tested to EU Standards", whatever that means. Does anyone know? More information at: http://www.milesautomotive.com/showroom_zx40s.php Peri Hartman _______________________________________________ For subscription options, see http://lists.sjsu.edu/mailman/listinfo/ev ------------------------------ Message: 15 Date: Sat, 22 Sep 2007 20:25:19 -0700 From: "Roderick Wilde" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Electric Barstool sets Land Speed Record! To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original I was supposed to post this earlier but obviously I am way late. Dennis's motor worked well except for the fact that whatever he did to it they had a hell of a time trying to get it geared tall enough to draw the amps necessary to extract the full horsepower available from the battery. The original 671 GMC starter motor we had in it was running a 6 volt armature. It drew 500 amps at no load. It was modified by key electric here in Port Townsend. I am not sure if it was Key Electric or Rob that had the roller bearing installed on the output shaft. Suffice it to say they were able to crank enough out of the one 12 volt battery for the record. The owner and driver of the bar stool is Rob Spencer from Idaho. He has been pursuing this goal for a couple years or so and my congratulations go out to him. For anyone interested here is an earlier video of me testing it out near our shop here in Port Townsend. It went way faster on pavement then it did on the salt due to the poor rolling resistance of salt. If you haven't been there you would not understand. Here is the video: http://www.suckamps.com/images/build_team_vehicles/BarStoolTesting.mov Roderick Wilde "Suck Amps EV Racing" www.suckamps.com ----- Original Message ----- From: "David Dymaxion" <[EMAIL PROTECTED]> To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Cc: <[EMAIL PROTECTED]> Sent: Saturday, September 22, 2007 12:16 AM Subject: [EVDL] Electric Barstool sets Land Speed Record! > The results aren't posted on the saltflats website yet, but I was there > and I saw it happen! Yes, ladies and gentlemen, 48 miles per hour on an > electric barstool! You can see some pictures, video, and commentary on: > > http://www.explodingdinosaurs.com/saltflats/2007worldofspeed/barstool > > Enjoy! > > > > > > > ____________________________________________________________________________________ > Building a website is a piece of cake. Yahoo! Small Business gives you all > the tools to get online. > http://smallbusiness.yahoo.com/webhosting > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > > > > -- > Internal Virus Database is out-of-date. > Checked by AVG Free Edition. > Version: 7.5.487 / Virus Database: 269.13.19/1008 - Release Date: > 9/14/2007 8:59 AM > > ------------------------------ Message: 16 Date: Sat, 22 Sep 2007 23:32:15 -0500 From: "Ryan Stotts" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Resting voltage for Odyssey PC680? To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=UTF-8 [EMAIL PROTECTED] wrote: > out of the box their resting voltage uncharged was 12.85 to 12.90. >about 130 passes on them and their resting voltage >after being on the shelf for 3 months is 12.97 to 13.01. Should I adjust my voltage or leave it be at 12.87? ------------------------------ Message: 17 Date: Sat, 22 Sep 2007 21:38:43 -0700 From: "Roy LeMeur" <[EMAIL PROTECTED]> Subject: Re: [EVDL] Electric Barstool sets Land Speed Record! To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed Hi Folks Some stuff to look at- Some hi-res photos of the Bonneville Barstool, [from 2004], some with Roderick on the stool- http://www.casadelgato.com/RoyLemeur/PT09.jpg http://www.casadelgato.com/RoyLemeur/BS01.jpg http://www.casadelgato.com/RoyLemeur/PT10.jpg http://www.casadelgato.com/RoyLemeur/PT11.jpg http://www.casadelgato.com/RoyLemeur/PT12.jpg http://www.casadelgato.com/RoyLemeur/shop30.jpg http://www.casadelgato.com/RoyLemeur/shop35.jpg http://www.casadelgato.com/RoyLemeur/shop36.jpg http://www.casadelgato.com/RoyLemeur/shop37.jpg Photo galleries where the above photos were pulled from- http://www.casadelgato.com/RoyLemeur/page01.htm {I hope the host server is up to this :-0 } Enjoy! Roy _________________________________________________________________ More photos; more messages; more whatever. Windows Live Hotmail - NOW with 5GB storage. http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_5G_0907 ------------------------------ Message: 18 Date: Sat, 22 Sep 2007 21:47:51 -0700 From: Jack Murray <[EMAIL PROTECTED]> Subject: Re: [EVDL] Shunts revisited To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii; format=flowed http://www.allelectronics.com/cgi-bin/category.cgi?item=SNT-600 $18 for 600 amp shunt, just bought one. it didn't come with the bolts as shown in the picture just fyi. Jack Jeff Major wrote: > Hi Dave, > > Yeah, you can do this. But current shunts are made of > an alloy which doesn't change resistance with heat, > within its ratings. Copper wire will change. The > other source of error is the connections. On shunts, > the sense lead terminals are independent of the power > terminals. This will be difficult to do with copper > cable and lug ends. If you're going to the trouble of > instrumenting with an ammeter, I'd recommend you use a > shunt. I've gotten several off eBay for as little as > $5. New ones, maybe $50 or 60, guessing. > > Jeff M > > > > > > --- [EMAIL PROTECTED] wrote: > > >>I see that ~ 24.5 inches of 4/0 wire is 0.1 milli >>Ohm. What do you think of >>using this method as a shunt? >> >>Thank you, >> >>Dave Delman >>1981 Electric DeLorean Project >>electricdelorean.com >> >> >> >>************************************** See what's >>new at http://www.aol.com >>_______________________________________________ >>For subscription options, see >>http://lists.sjsu.edu/mailman/listinfo/ev >> > > > > > > ____________________________________________________________________________________ > Check out the hottest 2008 models today at Yahoo! Autos. > http://autos.yahoo.com/new_cars.html > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 19 Date: Sat, 22 Sep 2007 21:52:48 -0700 From: "John G. Lussmyer" <[EMAIL PROTECTED]> Subject: [EVDL] PFC Charger/Regulator behavior To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I now have all 13 batteries in my Sparrow with Regs (MKIIC). When I'm charging, as soon as one of the regs "fires", the current drops to 0, then starts building back up until a reg fires again. So, once any reg starts triggering, charge current drops to a rather low value. Is this normal? ------------------------------ Message: 20 Date: Sat, 22 Sep 2007 21:58:38 -0700 From: "John G. Lussmyer" <[EMAIL PROTECTED]> Subject: [EVDL] Breaking in some new batteries To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I finally got the 2 bad Optima's replaced. So I now have 11 Optimas with about 3 cycles on them, and 2 brand new ones. I first charged the 2 new ones with a car charger (set to AGM of course), and then put them in the pack. When I turned on my PFC-40, all the regs lit up - except the 2 new batteries. (This only occured because I forgot to plug the regbus into the charger. If the regbus is plugged into the charger, you get random regs triggering and dropping the charge current way down.) So I then put my bench supplies on the 2 new batteries at 14.45 v (just below reg trigger level) and let them charge until they had dropped below 2A. Now when I tried the whole string with the PFC charger, those 2 lit up first. So I then drove 6.7 miles, using 1.33KWH. (198WH/Mile, not too good for a Sparrow. Better check tires and brakes!) Hooked up the charger, after a few minutes at 40A, the 2 new batteries started triggering their regs. So I left it for an hour, and when I came back most of the other batteries were triggering their regs, but NOT the 2 new ones. I tried turning on SW 6 for an equalize cycle, and the charger was putting out 1.4A at 191V, and NO regs were being triggered. They all must have been pretty even with each other. I only left it this way for a few minutes. Does all this sound normal for breaking in a slightly mixed pack? ------------------------------ Message: 21 Date: Sun, 23 Sep 2007 01:07:13 -0400 From: "Joseph T. " <[EMAIL PROTECTED]> Subject: Re: [EVDL] List is Back? To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1 Yes, Bob, you're back on the list. :) On 9/22/07, Bob Rice <[EMAIL PROTECTED]> wrote: > Hi EVerybody; > > A List message??? YES! I'm Back? Having serious EV withdrawl whatevers. > Resubscribed again, with my other addie. Lets see if this one stays on? > > Maybe SOMEbody came up whether IS there a K and W Charger? Still in biz? > In Marion Iowa?It's part time. Open it up, diddle a bit and it comes on > strong. Umplug it ,and plugitin a day later. Fan goes, hums along but NO > output, nothin! Guess I have a crody connection? It runs a small SCR and a > full wave bridge setup, a small printed circuit board. Wonder IF you could > drive the SCR with a Light dimmer across the gate?I guess the heart of it, > the board, is the control to the SCR gate? As it, the charger has 2 pots, > for amps AND volts.Like IF it gets SO worse that It won't work at all. Nice > fan, though. Sigh.Anybody else diddled sucessfully with these? > > Back again? > > Bob > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 22 Date: Sat, 22 Sep 2007 22:17:14 -0700 From: "Rush" <[EMAIL PROTECTED]> Subject: Re: [EVDL] S10 at the Scotsdale Pavillions Sept.22 To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Dennis wrote > It is now raining at the Pavillions so with a 50% chance we are canceling > our > show tonight but considering next sat. night.We also got winded and rained > off the track last night.We were going to turn things up a bit to try for > the > very low 12s. Dennis Berube I got there around 4, and Dennis got there around 5. What a great looking EV! Very clean, nothing but EV (except for the genny in the front). I took a lot of pics and will put them up on the web, give me a day or two. Everybody who saw it was really impressed. More later, Rush Tucson AZ, www.ironandwood.org www.TEVA2.com www.Airphibian.com ------------------------------ Message: 23 Date: Sat, 22 Sep 2007 22:06:13 -0700 (PDT) From: Ralph Merwin <[EMAIL PROTECTED]> Subject: Re: [EVDL] PFC Charger/Regulator behavior To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii John G. Lussmyer writes: > > I now have all 13 batteries in my Sparrow with Regs (MKIIC). > When I'm charging, as soon as one of the regs "fires", the current drops > to 0, then starts building back up until a reg fires again. > So, once any reg starts triggering, charge current drops to a rather low > value. > Is this normal? No. The current is supposed to start dropping gradually (on average) as the regs blink faster or more regs start blinking. I say 'on average' because the current doesn't drop smoothly, but rather bounces up and down between a couple of points that decrease over time. There is a trimpot behind the charger's face plate for adjusting the analog cutback. Rich or Joe will need to give you detailed instructions for this. Ralph ------------------------------ Message: 24 Date: Sun, 23 Sep 2007 11:03:14 +0100 From: Nikki Bloomfield <[EMAIL PROTECTED]> Subject: [EVDL] Calling any EV owners in the Bay Area, SF To: [EMAIL PROTECTED] Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Hi Folks, I'm wondering if anyone in the SF Bay area would be willing to meet up with a friend of mine who is looking to get some video footage and/ or first hand EV experience for a project that she's agreed to help me with which is taking place in July 2008 in the UK. The project is going to take the form of a UK run from John-O-Groats to Land's End, the most northerly to the most southerly point in mainland UK. We're not going to be going direct, and the project is going to involve as many commercially available EVs as possible. She's going to be visiting me in the UK in November to get some filming done here as well, but the aim is to produce a promotional video which we'll use during the event, which we've named "EV- JogLe" (http://www.ev-jogle.com). The whole aim of the project is to educate those outside of London about EVs and to give people a chance to see, experience and drive EVs for the first time at events which we'll hold throughout the three week run. We could do the distance in three days, but that'd be pointless as it wouldn't give us quite so much publicity. Email me for more info anyway! Amy if a friend of mine from SF and has agreed to take on this project as film-woman and web tecchie. She's always had to hear me going on about my positive EV experiences and has visited us in the past, so has some limited EV exposure. If anyone in the bay area would be willing to meet with her and let her get some first hand EV experience I'd be delighted. She'd like to get as up to speed as possible on what's going on in her local area so that come next year she's a real EVangelist ;) Perhaps people can email me off list? She's experienced electric bikes and scooters before, but needs to experience some larger stuff! All types of EVs would be welcome too! :) You can either email me at the above address, or at nikki{at}ev- jogle.com Thanks! Nikki. _______________________________ The flying Banana. Now with Lithium Ion goodness.... http://www.aminorjourney.com _______________________________ ------------------------------ Message: 25 Date: Sun, 23 Sep 2007 21:34:25 +0800 From: Ian Hooper <[EMAIL PROTECTED]> Subject: Re: [EVDL] Contactors, Fuses and Circuit Breakers To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Hey all, I'm really impressed with the price of these breakers, but they wouldn't ship internationally :( Would anyone over there in the US be willing to buy some for me, and post them over to Australia? (I could pre-send Paypal to cover it, plus a little extra for your trouble.) Shoot me an email off-list if you'd be willing! :) -Ian On 22/09/2007, at 1:35 PM, Mike Willmon wrote: > Dave, > Circuit Breakers visit John Drake the Solar Seller: > http://www.solarseller.com/ > Scroll half way down the main page to #45 UL Listed DC Breakers up > to 125 volts > Then scroll half way down and find this: > Airpax model # JLM-1-30353-3, 250 amp d.c. circuit breaker rated > at up to 160 volts d.c. ------------------------------ Message: 26 Date: Mon, 24 Sep 2007 01:12:26 +1000 From: Dominant <[EMAIL PROTECTED]> Subject: [EVDL] A123 M1 Capacity question To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii"; format=flowed G'Day all! I've been lurking for a while, and just had a question about the a123 M1 cells found in the DeWalt 36V battery packs. This has almost certainly been covered before, but I can't remember the answer. :) The a123 website says the M1 cell (found in DeWalt packs) is 3.3V and 2.3AH, yet I've read on web forums and the like that the DeWalt pack is also 2.3Ah. Surely both can't be correct? I was of the understanding that, wether connected in Series or Parallel, capacity was the combined total, ie, 2.3*10=23Ah, for the DeWalt packs, just like the Voltage is 3.3*10=33V (36V). I understand that Voltage is different depending on configuration (33/36V for Serial, 3.3V for Parallel). Cheers. ------------------------------ Message: 27 Date: Sun, 23 Sep 2007 10:44:05 -0500 From: Ted Sanders <[EMAIL PROTECTED]> Subject: Re: [EVDL] A123 M1 Capacity question To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" Connecting batteries in series increases the voltage. Connecting the batteries in parallel increases the AH. Beano -- 1981 Ford Escort EV EValbum 1010Ted Sanders > Date: Mon, 24 Sep 2007 01:12:26 +1000> To: ev@lists.sjsu.edu> From: [EMAIL > PROTECTED]> Subject: [EVDL] A123 M1 Capacity question> > G'Day all! I've been > lurking for a while, and just had a question > about the a123 M1 cells found > in the DeWalt 36V battery packs. This > has almost certainly been covered > before, but I can't remember the answer. :)> > The a123 website says the M1 > cell (found in DeWalt packs) is 3.3V and > 2.3AH, yet I've read on web forums > and the like that the DeWalt pack > is also 2.3Ah. Surely both can't be > correct? I was of the > understanding that, wether connected in Series or > Parallel, capacity > was the combined total, ie, 2.3*10=23Ah, for the DeWalt > packs, just > like the Voltage is 3.3*10=33V (36V). I understand that Voltage > is > different depending on configuration (33/36V for Serial, 3.3V for > Parallel).> > Cheers.> > _______________________________________________> For > subscription options, see> http://lists.sjsu.edu/mailman/listinfo/ev _________________________________________________________________ Can you find the hidden words?? Take a break and play Seekadoo! http://club.live.com/seekadoo.aspx?icid=seek_wlmailtextlink ------------------------------ Message: 28 Date: Sun, 23 Sep 2007 11:55:05 EDT From: [EMAIL PROTECTED] Subject: Re: [EVDL] Resting voltage for Odyssey PC680? To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="US-ASCII" In a message dated 9/22/2007 9:33:30 PM US Mountain Standard Time, [EMAIL PROTECTED] writes: > ey PC680? > Date:9/22/2007 9:33:30 PM US Mountain Standard Time > From:[EMAIL PROTECTED] > Reply-to:ev@lists.sjsu.edu > To:ev@lists.sjsu.edu > Received from Internet: > > > > [EMAIL PROTECTED] wrote: > > >out of the box their resting voltage uncharged was 12.85 to 12.90. > > >about 130 passes on them and their resting voltage > >after being on the shelf for 3 months is 12.97 to 13.01. > > Should I adjust my voltage or leave it be at 12.87? > On my current eliminator dragster and my smoke screen S10,I bulk charge to 14.1 volts per battery at the track. At home after a day or so I put the batteries on a balance charge at 14-3.I have gotten as many as 625 cycles drag racing my dragster and the hawkers keep putting out as they did at 50 cycles. The truck now has over 400 hard running miles with its longest run now over 37miles on 1 string of 26ah hawkers. Resting OCV after being charged (resting 24hrs)is 13.01 to 13.04. Dennis Berube ------------------------------ Message: 29 Date: Sun, 23 Sep 2007 12:16:18 EDT From: [EMAIL PROTECTED] Subject: Re: [EVDL] Electric Barstool sets Land Speed Record! To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="US-ASCII" In a message dated 9/22/2007 6:55:53 AM US Mountain Standard Time, [EMAIL PROTECTED] writes: > lectric Barstool sets Land Speed Record! > Date:9/22/2007 6:55:53 AM US Mountain Standard Time > From:[EMAIL PROTECTED] > Reply-to:ev@lists.sjsu.edu > To:ev@lists.sjsu.edu > Received from Internet: > > > > What all do you do to mod a truck starter? ... and is one type of > starter really faster than another? > > I'd like to plop one down on a go-cart frame I have, any suggestions > to crank out some speed? > A starter is just that a starter.The duty cycle is very low on most starters I have seen.But if you must ask start out with good bearings and brushes ect from your local starter rebuilder seat in the brushes and keep the carbon dust out. Dennis Berube ------------------------------ Message: 30 Date: Sun, 23 Sep 2007 17:46:51 +0200 From: Dan Frederiksen <[EMAIL PROTECTED]> Subject: Re: [EVDL] A123 M1 Capacity question To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed both are 'correct' capacity is not measured in Ah. it's Wh (watthours or powertime) so the capacity is the voltage times the amphours (Ah).amp hours means how many amps you can pull in an our. but the power is watt the cells in the dewalt packs are in series in which the voltage is added. when they are in parallel the amp power is added. also the Ah so when you want to know the capacity of a battery setup you multiply the voltage and the Ah number. Dan ------------------------------ Message: 31 Date: Sun, 23 Sep 2007 10:10:09 -0700 (PDT) From: Larry Cronk <[EMAIL PROTECTED]> Subject: Re: [EVDL] K and W Chargers an' Stuff To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=iso-8859-1 Matt Kenigson <[EMAIL PROTECTED]> wrote: Should those of us with old K&W BC-20s be concerned about parts shortage and buy some up now? It's a bad time for me to do so, but I don't want to end up crying 'cause I didn't take advantage of it while I could. Matt On 9/18/07, Timothy Balcer wrote: > > As I said in the main thread, I have the phone number for the KW > business. If anyone would like it please send me a private email. > Maybe you could pick up backstock cheap! > > _______________________________________________ For subscription options, see http://lists.sjsu.edu/mailman/listinfo/ev I would like the phone 3 please 1 sincerely larry Cronk 72 datsun ELECTK --------------------------------- Shape Yahoo! in your own image. Join our Network Research Panel today! ------------------------------ Message: 32 Date: Sun, 23 Sep 2007 13:18:49 -0400 From: "Joseph T. " <[EMAIL PROTECTED]> Subject: Re: [EVDL] A123 M1 Capacity question To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1 Amp Hours don't increase in series, the amount of watt hours does. It'd be nice though if amp hours did increase in series. On 9/23/07, Dan Frederiksen <[EMAIL PROTECTED]> wrote: > both are 'correct' > capacity is not measured in Ah. it's Wh (watthours or powertime) > so the capacity is the voltage times the amphours (Ah).amp hours means > how many amps you can pull in an our. but the power is watt > > the cells in the dewalt packs are in series in which the voltage is > added. when they are in parallel the amp power is added. also the Ah > > so when you want to know the capacity of a battery setup you multiply > the voltage and the Ah number. > > Dan > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev > ------------------------------ Message: 33 Date: Sun, 23 Sep 2007 13:39:15 -0400 From: "Deanne Mott" <[EMAIL PROTECTED]> Subject: [EVDL] Adding ceramic heater to Cabriolet To: ev@lists.sjsu.edu Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1 I want to add a ceramic heater to my Cabriolet for this winter. I'll probably pay a local Rabbit mechanic to do the under the dash work since I don't really have the time or inclination for it. Have a few questions: 1.) I think in NC that a single 1500W heater should be fine, but if someone in the area disagrees I'd like to hear about it. 2.) I remember reading about folks buying cheap heaters at Lowes or somewhere and removing the ceramic core from it and using that. I also see a ceramic heater core at evparts for almost $200. I'm wondering if there is an advantage is to buying the $200 part other than avoiding disassembly? 3.) I am wondering about the wiring. Does anyone have a schematic of how they wired up their heater? In particular I'm wondering how you wire it up to the pack, how it is isolated, etc. Thanks alot - De ------------------------------ Message: 34 Date: Sun, 23 Sep 2007 19:45:43 +0200 From: Dan Frederiksen <[EMAIL PROTECTED]> Subject: Re: [EVDL] Adding ceramic heater to Cabriolet To: Electric Vehicle Discussion List <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I have not spent time looking into specific products and their ease of installation but just in case you didn't know I'd add that compression heaters (same principle as refridgerator) can give you roughly 3 times as much heat as you spend energy. because heating can be a significant part of the power consumption a 3x gain is worth something. whether a useful product exists though I don't know Dan Deanne Mott wrote: >I want to add a ceramic heater to my Cabriolet for this winter. I'll >probably pay a local Rabbit mechanic to do the under the dash work >since I don't really have the time or inclination for it. Have a few >questions: > >1.) I think in NC that a single 1500W heater should be fine, but if >someone in the area disagrees I'd like to hear about it. > >2.) I remember reading about folks buying cheap heaters at Lowes or >somewhere and removing the ceramic core from it and using that. I >also see a ceramic heater core at evparts for almost $200. I'm >wondering if there is an advantage is to buying the $200 part other >than avoiding disassembly? > >3.) I am wondering about the wiring. Does anyone have a schematic of >how they wired up their heater? In particular I'm wondering how you >wire it up to the pack, how it is isolated, etc. > >Thanks alot - De > >_______________________________________________ >For subscription options, see >http://lists.sjsu.edu/mailman/listinfo/ev > > > ------------------------------ Message: 35 Date: Sun, 23 Sep 2007 14:20:34 -0400 From: "Dmitri" <[EMAIL PROTECTED]> Subject: Re: [EVDL] A123 M1 Capacity question To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Don't be confusing him now. Usually, capacity = Ah, energy=Wh ----- Original Message ----- From: "Dan Frederiksen" <[EMAIL PROTECTED]> To: "Electric Vehicle Discussion List" <ev@lists.sjsu.edu> Sent: Sunday, September 23, 2007 11:46 AM Subject: Re: [EVDL] A123 M1 Capacity question > both are 'correct' > capacity is not measured in Ah. it's Wh (watthours or powertime) > so the capacity is the voltage times the amphours (Ah).amp hours means > how many amps you can pull in an our. but the power is watt > > the cells in the dewalt packs are in series in which the voltage is > added. when they are in parallel the amp power is added. also the Ah > > so when you want to know the capacity of a battery setup you multiply > the voltage and the Ah number. > > Dan > > _______________________________________________ > For subscription options, see > http://lists.sjsu.edu/mailman/listinfo/ev ------------------------------ _______________________________________________ EV@lists.sjsu.edu For subscription options, see http://lists.sjsu.edu/mailman/listinfo/ev End of EV Digest, Vol 2, Issue 57 *********************************