So sprach root am Mon, Dec 11, 2000 at 08:44:19AM -0800:
I would like to add the following;
/dev/hda7 / ext2 defaults ? ? It is these numbers I am primarily
Make that
/dev/hda7 /mnt/exchange ext2 defaults 2 2
The 1st number tells fsck when to check it, the 2nd number isn't used.
Indeed. My bad.
Mike
On Tue, 12 Dec 2000, Alexander Skwar wrote:
So sprach Mike MacCana am Tue, Dec 12, 2000 at 10:52:50AM +1100:
[or vice versa, OI might have the numbers round the wrong way]. 1 is a
yes, 0 is a no.
No, it tells fsck WHEN to check it. First the 1's are done, then
On Tuesday 12 December 2000 02:13, you wrote:
Mike MacCana wrote:
Chris Molnar's RPMs seem to be marked as 2.1 - AFAIK, there
is not KDE 2.1 yet, and it makes me very worried to install
them on my system, especially when thewre may be a real 2.1
soemtime in the future, and the version
Submitted 11-Dec-00 by Klar Brian D Contr MSG/SWS:
My problem is getting the sound to work.
It is a Yamaha DS-XG, mandrake chose to use Alsa, and that is fine. However all I get
for sound is a continuous noise. What do I need to look at to get this card working?
from my /etc/modules.conf:
##
This message was sent from: Linux Mandrake Expert.
http://telesoft.ca/phorum/read.php?f=5i=577t=577
testing if it will post message on the mailing list
http://www.telesoft.ca/
The name may not say much to most of you but
Hi,
When I go to print from many applications - my computer completely freezes - it
appears that CUPS / LP (?) often take up an enourmous slice of CPU time and stay there
- meanwhile the hard drive is going wild and nothing gets printed. I eventually have
to either wait a few minutes while a
Thanks to all those who helped with suggestions with kppp and dns - I'll
see what happens next reboot!
Next problem is kwintv (using a noname bt848 chipset):
I get the following error message when starting it, and no sound:
wdk@Ralph ~ $ kwintv
Warning: QObject::connect: Cannot connect
I hope someone has had this happen, or know how to undo it.
After a long time from a clean install (retail) all the sudden the devices in
my /mnt (ie. cdrom, cdrom2,disk,floppy) had little locks on the mnt
directories
and I can't get in them...says I don't have access rights, and it won't let
Have you looked in /etc/fstab ? That's where the definitions are for those
devices, one line of text per device. 'man fstab' for information on the
syntax.
Dave
At 09:28 AM 12/12/2000 -0500, you wrote:
I hope someone has had this happen, or know how to undo it.
After a long time from a clean
I could use that answer too. Same thing happened to me last night - trying
to access my cdrom as a user, it told me I didn't have access rights. As
root, I would simply get an input/output error message. I could mount and
unmount cdrom but not access it (It was a supermount drive).
I
get a ISDN line. assuming every since user isn't using internet intensive
applications all day, that should suffice. if they are...get a t-1, and
give me a shell to help you with that bandwidth.
my t-1 costs 1000.00 a month.
our centrex-isdn line costs 300.00 a month.
matthew
-Original
On Monday 11 December 2000 07:13 pm, Alan Shoemaker wrote:
Mike MacCana wrote:
Chris Molnar's RPMs seem to be marked as 2.1 - AFAIK, there
is not KDE 2.1 yet, and it makes me very worried to install
them on my system, especially when thewre may be a real 2.1
soemtime in the future, and
On Monday 11 December 2000 08:36 pm, Daniel Velzi wrote:
Hi Tom, I installed this version downloaded from tucows (must be the
same I believe) without installing Chris Molnar's version before, and
all run ok. Kedit is ok and my bookmarks in konqueror are here
without problem. Perhaps Chris
I see that kernel 2.2.18 has been released in final version. Has anyone
tested an install of this kernel on mdk 7.2 yet?
I'm debating on compiling it this evening, just to try out, any specific
tips on how I could compile and install it without killing my existing
kernel install?
This would
On Tuesday 12 December 2000 03:05 am, civileme wrote:
Chris's rpms at the NEBS site are from the CVS tree on the way to 2.1
While they predate the 2.0.1 release date, they are from the CVS
after the feature freeze for 2.0.1 and well on the way to 2.1.
Chris made 20001210 CVS rpm's
On Monday 11 December 2000 07:22 pm, Mike MacCana wrote:
kdebase-2.1-0.20001210.2mdk.i586.rpm
is what I've just downloaded from nebsllc.com.
How odd. I installed them anyway and KDM, drag and drop, and the
cotents of my KPanel stopped working, so I'm gonna go with the
official ones anyway.
On December 9, 2000 02:47 pm, you wrote:
Sheldon Lee Wen wrote:
You got the 3dfx kernel module driver to work with 4.0.1?
I tried it and it would work, but after I exited from a game X would be
hosed. I got weird screen artifacts.
Hmm. I sounds like the module isn't loaded. Try an
Where is qt-mt... I have a standard 7.2 install but kwintv 0.8.5 complains that there
is no
qt-mt. Other distros I guess have this (Suse for one) by default installation.
Brian D. Klar - CVE
OTS
WPAFB
(937)257-5773
937-973-3125 (Pager)
Keep in touch with http://mandrakeforum.com:
i installed LM with high security settings. for some reason i don't see
mandrakeupdate under drakconf. i can't find an RPM for it either.
any clues? help me track this down :P
matthew
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
I have tried setting up an imap account (along with a pop mail account) to
use with kmail but it doesn't appear to work. The pop mail is fine - it was
setup through kmail itself (which only gives you the option of pop3 or local
mailbox) - imap is not an option (WHY NOT?!).
Through the
I highly recommend buildkernel. You can get it from rpmfind. This is a
nice, semiautomatic kernel-building script. Starting with a relatively
simple command at the beginning (ie, "buildkernel --BKBUILDTYPE=bzImage
--HOSTTYPE=i386" for instance), it will go through the process of downloading
Hi !
I had a clean fresh full expert installation of LM 7.2
I have downloaded all rpm's from C.Molnar's site at ftp.nebsllc.com but
during update of kdegraphics i receive the error about missing
"libbaglayout.so" that used to be a part of kdegraphics package
Also my kdm stopped
Related to an imap email problem I posted just prior to this message...
I have two email accounts, one via work and one from uswest. Kmail handles
my uswest account (pop3) no problem but it doesn't work with my work-provided
imap account (inspite of setting it all up via kontrol-center). As a
Mandrake 7.0
Thought I had Kmail sending working by changing from SMTP to Sendmail.
Wrong!
The message transfers to the sent-mail folder but never is received.
I don't know where it goes.
It would be so convenient to use this rather than going to the internet and
using either Netscape or Yahoo
Thank you all for your replies.
The gears problem is solved, but the slowness still remains, see
below.
setting FX_GLIDE_SWAPINTERVAL=0 make gears jump to 611 fps
q3a demo001 is OK, both with libMesaVoodoGL (3398 fps) from Q3A 1.11 and libGL from
XFree86-4.0.1h (31.8 fps)
But ut, heretic2,
On Tuesday 12 December 2000 09:57, you wrote:
I see that kernel 2.2.18 has been released in final version. Has
anyone
tested an install of this kernel on mdk 7.2 yet?
I'm debating on compiling it this evening, just to try out, any specific
tips on how I could compile and
Has anyone used the 'macutils' or equiv?
I have not had much luck for instance;
converting BinHex Picts sent from Mac People.
They usually try to send em jpeg but there are
times when it would be nice to do a simple
'point and click' if possible.
The 'macutils' on my LM 7.2 is dated 1992
and I
This is how I did when I had similar problem.
Install XF 3.3.6
and then look at the Modeline in the /etc/X11/XF86Config for the
1024x768 @ 100Hz modeline. Cut and paste this Modeline in your XF86Config-4
config file.
Other option:
Start XF 3.3.6 and fireup xvidtune. Note down all the values.
Wow.
Now this is the kind of help we can all use.
Thanks. I'll give that a try as soon as I shovel out my driveway.
Cheers
On Tuesday 12 December 2000 11:57 am, you wrote:
I'm debating on compiling it this evening, just to try out, any
specific tips on how I could compile and install
do those extra mode lines work with version 4.0 or is it just limited to the
old versions? I never noticed any difference.
-Original Message-
From: Amit Bapat [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Tuesday, December 12, 2000 4:01 PM
Subject: Re: [expert] can't
Up until now I have not had Postfix running, simply because I didn't really
need it. Alas, today I decided to start it so that root could be notified of
system-related things via email.
WELL HOLY CRAP!! It seems as though cron sends out an email every time it
completes a job. This really
How to write locale file? Especially to a write-to-left script langguage environment?
Thanks,
_
Ê׶¼ÔÚÏß--ÖйúÈ˵ÄÍøÉϼÒÔ° http://www.263.net
@263.netÖйú×î´óµÄÔÚÏßÓÊ¾Ö http://freemail.263.net
ÖйúÈ˵ÄÔÚÏß¹ºÎïÀÖÔ°¡ª¡ª263ÉÌ³Ç http://shopping.263.net
[EMAIL PROTECTED] wrote:
Name Your Most Wanted Cooker Packages, Please
(http://forum.mandrakesoft.com/article.php3?sid=20001212151414)
Just got my new 150 MB quota on mandragon.org, so I thought I might do some of you a
favour and recompile wanted Cooker package for LM 7.2.
Please
33 matches
Mail list logo