Io uso l'alcatel home.
Ma non c'e' problema, con adsl: la maggior parte dei modem li devi attaccare
ad una scheda di rete. Io uso una 3com (ottima) ma puoi prenderne una
compatibile.
Non comprare quelli con l'uscita USB.
Ciao
- Original Message -
From: Daniele Bamberghi [EMAIL
Hello,
i have a Problem with my ISDNcard from teles. The same card with the
same parameters will work fine under Suse 7.0 and Red Hat 7.0.
Under MD 8.0 it will not establisht a internet connection.
here are some infos /var/log/messages
localhost kernel: isapnp: Scanning for PnP cards...
May
Dear friends:
I've been trying to configure VMware for my Windows 98 /mnt/windows partition.
I have an AMD K6-2 400, 128 meg of RAM. Installation of the VMware rpm went
off perfectly. I am speaking of the interactive installation procedure (I
think it's called the file vmware-config.pl).
I
Hi,
I have just done a fresh install of Mandrake 8.0 after having used 7.2
with no problems for some time. I am trying to install two different
commercial symbolic math packages, Macsyma Pro 2.4 and Maple V. Both
packages seem to install fine, but the executables they install are not
Neal,
This drove me insane for awhile and then I finally nailed it. I would type
service usb status and get not running, yet it was starting the service at
boot. what I had to do was create a file in /etc/sysconfig called usb. The
contents of the file are as follows:
USB=yes
MOUSE=no
Hi,
Ive just installed ximian and have made a right mess of it!.. Does
anyone know what the configuration applet is called. I hope to be able
to start it from an xterm within ximian and undo the damage. The theory
is I have selected multiple windows which are overlaying the main window
From: Pierre Fortin <[EMAIL PROTECTED]>
To: pedro marocas <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: [expert]
Date: Wed, 23 May 2001 16:05:12 -0400
pedro marocas wrote:
Hi. After install a second hd(yes, i configure it in BIOS as a second master,
i
lost the jumper:( ),
On Friday 25 May 2001 05:01 am, Will Woods wrote:
Hi,
I have just done a fresh install of Mandrake 8.0 after having used 7.2
with no problems for some time. I am trying to install two different
commercial symbolic math packages, Macsyma Pro 2.4 and Maple V. Both
packages seem to install
I have run into this several times myself. With me, the latest such episode
occurred with sixpack, a bibliography application for lyx. I installed it,
which went fine. I then try to run it and get the same message you do. I
then do a which executable and it properly identifies the
On 24 May 01, at 21:26, Stephen Boulet wrote:
I really like using webmin for this. There is a nice module to synchronize
your system time and hardware time with a time server.
Done that. Makes no difference. (Except that date -u now gives an
accurately wrong time :-) )
The Webmin thing
This would be better asked on one of the comp.unix.sco.* newsgroups but here
is the answer anyway :)
If you are using the scoadmin GUI, realize that it can only scan for other
SCO boxes with printers (and I believe that it even says that some where on
the menu or documentation). I have
Hi, all.
I would like to upgrade from 7.2 to 8.0. Unfortunately, I don't have a
CD-ROM burner, so I can't just download the ISO and install. Is there a way
to do an installation over a network (from an FTP site, for example?
TIA.
You can download the iso and mount it with the loopback device and run live_upgrade
Julia
Quoting Brian Hartman ([EMAIL PROTECTED]):
Hi, all.
I would like to upgrade from 7.2 to 8.0. Unfortunately, I don't have a
CD-ROM burner, so I can't just download the ISO and install. Is there a
Fox wrote:
A friend of mine got it to work this week.
First:
unset LANG
unset LANGUAGE
unset LC_*
Any environment variable that starts with LC_ you need to unset. That will
fix your SIGSEGV.
Next, switch to GNOME to run the installer if some buttons don't work. Some
of the
[EMAIL PROTECTED] wrote:
I am a student at a Southern California University. I need to know how
to transfer rough data in an email document (text-based data) to the
spreadsheets or database appications in Staroffice... I know ms access
has some of these capabilites (as I done it before),
Benjamin Sher wrote:
First obvious question: Do you RUN Vmware with hdc as raw disk with
/mnt/windows MOUNTED OR UNMOUNTED? That is, do you have to UNmount
/mnt/windows every time you run VMware in this case or do you run Vmware with
/mnt/windows mounted?
You can run it mounted but
Have you or anyone else had luck running VMWare under the new 2.4.x kernels? I
can't get the modules to compile
Thanks
Quoting Benjamin Sher ([EMAIL PROTECTED]):
Dear friends:
I've been trying to configure VMware for my Windows 98 /mnt/windows partition.
I have an AMD K6-2 400, 128 meg
So sprach D. R. Evans am Thu, May 24, 2001 at 06:30:20PM -0600:
Fine. Now please tell me how you did it :-)
Hmm, well, I don't know. I just selected it at install time, and that's it.
Maybe the thing is that my hardware time is running on UTC? Maybe you
should try that?
And DrakConf also
On 25 May 01, at 22:11, Alexander Skwar wrote:
So sprach D. R. Evans am Thu, May 24, 2001 at 06:30:20PM -0600:
Fine. Now please tell me how you did it :-)
Hmm, well, I don't know. I just selected it at install time, and that's it.
Maybe the thing is that my hardware time is running on
Hey all
I downloaded tuxracer .61 SRC RPM from rpmfind.net (I had to use the RH
7.1 sources, since all the Mandrake sources groused about not finding
libSDL, even tho I did install it), and rebuilt it (Linux Mandrake 7.2).
Anyway, the RH7.1 RPM rebuilt fine, but I couldn't install it, since it
On Friday 25 May 2001 10:43 am, Will Woods wrote:
I seem to get a conflict with ldconfig-2.2.2-4mdk when I try and install
it. Can I force it to install (and is that advisable?)
Thanks for your help.
Will
I have not yet applied the fix to my computer, but a friend has to his (and
Hi,
I am having problems with correct memory detection on two machines. Both
machines have 1.5GB and LM8.0 on both of these detects 1.0GB. On one of the
machines, 7.2 was installed earlier and it detected 1.5GB correctly.
1. ASUS K7V (VIA) Motherboard
2. SGI Zx10 workstation
I have tried
Yeah, I've been fighting similar problems for weeks.
I have been trying to compile smpeg 4.2 or 4.3 and
they won't find GL. They always disable opengl
support because it cannot be found.
You might try compiling the nvidia drivers from
tar.gz. I was going to try that next. Most
applications
So sprach D. R. Evans am Fri, May 25, 2001 at 02:35:31PM -0600:
Yeah; I was hoping to avoid that, but all the people who seem to have
Uhm, why did you want to avoid that? Long, long ago *G* when I was still
running Windows occiasionally, I also had my clock set to UTC. Now, since
Windows
Got it working!
But it sure doesn't seem very logical.
1. Set BIOS clock to UTC.
2. Set /etc/localtime to link to the correct timezone.
3. Set UTC=false (yes, false!) in /etc/sysconfig/clock
Now date and date -u both work, as does the regular clock on the
desktop.
Even though I received
Hi
did you install Nvidia's drivers as rpm or from a tar file? (just for curiousity, if
you installed it from rpm try 'rpm -qf /usr/lib/libGLcore.so.1'). it doesn't really
matter, if that's the only thing missing then just install it with the 'nodeps'
option: 'rpm -ivh --nodeps rpm file'.
On 25 May 2001 21:44:55 +, Haim Ashkenazi wrote:
Hi
did you install Nvidia's drivers as rpm or from a tar file? (just for curiousity, if
you installed it from rpm try 'rpm -qf /usr/lib/libGLcore.so.1').
I never install NVidia's stuff from anything but tarballs. I have 3
different kernel
Find you a site close by and download the network.img file and direct copy it
to a floppy. dd if=network.img of=/dev/fd0 (or is it /mnt/floppy?)
make sure you have the exact address to the ftp site/Mandrake directory
written down for reference cause it don't hunt for you. This is a pretty
Thanks to all of you who have taken time to contribute your comments and
help to my little FAQ project. I hope to get some more work done on it
this weekend, and hopefully double the current number of FAQ's.
I had some problems over the past 24 hours, and as much as I would like
to say that it
D. R. Evans wrote:
On 24 May 01, at 21:05, David Rankin wrote:
D. R. Evans wrote:
On 25 May 01, at 0:47, Alexander Skwar wrote:
So sprach D. R. Evans am Thu, May 24, 2001 at 03:28:29PM -0600:
This causes date to respond correctly, and the clock on the screen to
Hopefully someone reading will have some additionaly insight as to
why time is slightly warped in our systems.
One of my Mandrake 8.0 machines suddendly put itself on UTC and I was
not able to restore it to running the hwclock on localtime.
Much later: By copying from the good machine I was
Yep when you're ready to install. It will work exactly the same as if you
had cdroms in there (except for setting up your network parameters and ftp
site info first).
-s
On Friday 25 May 2001 09:12 pm, you wrote:
On Fri, 25 May 2001, s wrote:
After I do this, I just boot from the floppy?
32 matches
Mail list logo
