Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
On Mon, Aug 27, 2018 at 04:10:01PM +0800, Shiyou Yin wrote: > > > >-Original Message- > >From: ffmpeg-devel-boun...@ffmpeg.org > >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of > >Shiyou Yin > >Sent: Saturday, August 25, 2018 11:04 AM > >To: 'FFmpeg development discussions and patches' > >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >no-expensive-optimizations > > > >>> Hi Michael, please help to review the following updates. > >>> > >>> > >>> diff --git a/configure b/configure > >>> index b9c9d0b..08cf48e 100755 > >>> --- a/configure > >>> +++ b/configure > >>> @@ -4796,15 +4796,24 @@ elif enabled mips; then > >>> disable mipsfpu > >>> disable mipsdsp > >>> disable mipsdspr2 > >>> +# When gcc version less than 5.3.0, add > >>> -fno-expensive-optimizations flag. > >>> +if [ $cc == gcc ]; then > >>> +gcc_version=$(gcc -dumpversion) > >>> +if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" > >>> + | sort -rV | head -n 1)" == > >>> "$gcc_version" ]; then > >>> +expensive_optimization_flag="" > >>> +else > >>> + > >>> expensive_optimization_flag="-fno-expensive-optimizations" > >>> +fi > >>> +fi > >> > >>This patch looks corrupted (by a newline) > >> > >>[...] > > > > > >Hi Michael, has repasted below, To avoid being corrupted again, I add an > >attachment. > > > >diff --git a/configure b/configure > >index b9c9d0b..08cf48e 100755 > >--- a/configure > >+++ b/configure > >@@ -4796,15 +4796,24 @@ elif enabled mips; then > > disable mipsfpu > > disable mipsdsp > > disable mipsdspr2 > >+# When gcc version less than 5.3.0, add > >-fno-expensive-optimizations flag. > >+if [ $cc == gcc ]; then > >+gcc_version=$(gcc -dumpversion) > >+if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" | sort > >-rV | head -n 1)" > >=="$gcc_version" ]; then > >+expensive_optimization_flag="" > >+else > >+ > >expensive_optimization_flag="-fno-expensive-optimizations" > >+fi > >+fi > > case $cpu in > > loongson3*) > >-cpuflags="-march=loongson3a -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson3a -mhard-float > >$expensive_optimization_flag" > > ;; > > loongson2e) > >-cpuflags="-march=loongson2e -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson2e -mhard-float > >$expensive_optimization_flag" > > ;; > > loongson2f) > >-cpuflags="-march=loongson2f -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson2f -mhard-float > >$expensive_optimization_flag" > > ;; > > esac > > ;; > >-- > >2.1.0 > > Is there any other comment for this patch? no, will apply thanks [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB You can kill me, but you cannot change the truth. signature.asc Description: PGP signature ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
>-Original Message- >From: ffmpeg-devel-boun...@ffmpeg.org [mailto:ffmpeg-devel-boun...@ffmpeg.org] >On Behalf Of >Shiyou Yin >Sent: Saturday, August 25, 2018 11:04 AM >To: 'FFmpeg development discussions and patches' >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >no-expensive-optimizations > >>> Hi Michael, please help to review the following updates. >>> >>> >>> diff --git a/configure b/configure >>> index b9c9d0b..08cf48e 100755 >>> --- a/configure >>> +++ b/configure >>> @@ -4796,15 +4796,24 @@ elif enabled mips; then >>> disable mipsfpu >>> disable mipsdsp >>> disable mipsdspr2 >>> +# When gcc version less than 5.3.0, add >>> -fno-expensive-optimizations flag. >>> +if [ $cc == gcc ]; then >>> +gcc_version=$(gcc -dumpversion) >>> +if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" >>> + | sort -rV | head -n 1)" == >>> "$gcc_version" ]; then >>> +expensive_optimization_flag="" >>> +else >>> + >>> expensive_optimization_flag="-fno-expensive-optimizations" >>> +fi >>> +fi >> >>This patch looks corrupted (by a newline) >> >>[...] > > >Hi Michael, has repasted below, To avoid being corrupted again, I add an >attachment. > >diff --git a/configure b/configure >index b9c9d0b..08cf48e 100755 >--- a/configure >+++ b/configure >@@ -4796,15 +4796,24 @@ elif enabled mips; then > disable mipsfpu > disable mipsdsp > disable mipsdspr2 >+# When gcc version less than 5.3.0, add >-fno-expensive-optimizations flag. >+if [ $cc == gcc ]; then >+gcc_version=$(gcc -dumpversion) >+if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" | sort >-rV | head -n 1)" >=="$gcc_version" ]; then >+expensive_optimization_flag="" >+else >+ >expensive_optimization_flag="-fno-expensive-optimizations" >+fi >+fi > case $cpu in > loongson3*) >-cpuflags="-march=loongson3a -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson3a -mhard-float >$expensive_optimization_flag" > ;; > loongson2e) >-cpuflags="-march=loongson2e -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson2e -mhard-float >$expensive_optimization_flag" > ;; > loongson2f) >-cpuflags="-march=loongson2f -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson2f -mhard-float >$expensive_optimization_flag" > ;; > esac > ;; >-- >2.1.0 Is there any other comment for this patch? ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
>> Hi Michael, please help to review the following updates. >> >> >> diff --git a/configure b/configure >> index b9c9d0b..08cf48e 100755 >> --- a/configure >> +++ b/configure >> @@ -4796,15 +4796,24 @@ elif enabled mips; then >> disable mipsfpu >> disable mipsdsp >> disable mipsdspr2 >> +# When gcc version less than 5.3.0, add >> -fno-expensive-optimizations flag. >> +if [ $cc == gcc ]; then >> +gcc_version=$(gcc -dumpversion) >> +if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" | >> + sort -rV | head -n 1)" == >> "$gcc_version" ]; then >> +expensive_optimization_flag="" >> +else >> + >> expensive_optimization_flag="-fno-expensive-optimizations" >> +fi >> +fi > >This patch looks corrupted (by a newline) > >[...] Hi Michael, has repasted below, To avoid being corrupted again, I add an attachment. diff --git a/configure b/configure index b9c9d0b..08cf48e 100755 --- a/configure +++ b/configure @@ -4796,15 +4796,24 @@ elif enabled mips; then disable mipsfpu disable mipsdsp disable mipsdspr2 +# When gcc version less than 5.3.0, add -fno-expensive-optimizations flag. +if [ $cc == gcc ]; then +gcc_version=$(gcc -dumpversion) +if [ "$(echo "$gcc_version 5.3.0" | tr " " "\n" | sort -rV | head -n 1)" =="$gcc_version" ]; then +expensive_optimization_flag="" +else + expensive_optimization_flag="-fno-expensive-optimizations" +fi +fi case $cpu in loongson3*) -cpuflags="-march=loongson3a -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson3a -mhard-float $expensive_optimization_flag" ;; loongson2e) -cpuflags="-march=loongson2e -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson2e -mhard-float $expensive_optimization_flag" ;; loongson2f) -cpuflags="-march=loongson2f -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson2f -mhard-float $expensive_optimization_flag" ;; esac ;; -- 2.1.0 0001-configure-loongson-revert-no-expensive-optimizations.patch Description: Binary data ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
On Sat, Aug 25, 2018 at 12:19:40AM +0800, Shiyou Yin wrote: > rom: ffmpeg-devel-boun...@ffmpeg.org [mailto:ffmpeg-devel-boun...@ffmpeg.org] > On Behalf Of > >Michael Niedermayer > >Sent: Thursday, August 23, 2018 3:27 AM > >To: FFmpeg development discussions and patches > >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >no-expensive-optimizations > > > >On Wed, Aug 22, 2018 at 06:11:15PM +0800, Shiyou Yin wrote: > >> >-Original Message- > >> >From: ffmpeg-devel-boun...@ffmpeg.org > >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Michael > >> >Niedermayer > >> >Sent: Wednesday, August 22, 2018 6:04 AM > >> >To: FFmpeg development discussions and patches > >> >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >> >no-expensive-optimizations > >> > > >> >On Tue, Aug 21, 2018 at 04:06:05PM +0800, Shiyou Yin wrote: > >> >> >-Original Message- > >> >> >From: ffmpeg-devel-boun...@ffmpeg.org > >> >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Shiyou Yin > >> >> >Sent: Thursday, July 12, 2018 8:44 PM > >> >> >To: ffmpeg-devel@ffmpeg.org > >> >> >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >> >> >no-expensive-optimizations > >> >> > > >> >> >The bug in gcc-4.9.x has been fixed in gcc master branch. > >> >> >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. > >> >> >More bug info see: > >> >> >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 > >> >> >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html > >> >> > > >> >> >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f > >> >> >Signed-off-by: Shiyou Yin > >> >> >--- > >> >> > configure | 6 +++--- > >> >> > 1 file changed, 3 insertions(+), 3 deletions(-) > >> >> > > >> >> >diff --git a/configure b/configure index b1a4dcf..17a7ea9 100755 > >> >> >--- a/configure > >> >> >+++ b/configure > >> >> >@@ -4789,13 +4789,13 @@ elif enabled mips; then > >> >> > disable mipsdspr2 > >> >> > case $cpu in > >> >> > loongson3*) > >> >> >-cpuflags="-march=loongson3a -mhard-float > >> >-fno-expensive-optimizations" > >> >> >+cpuflags="-march=loongson3a -mhard-float" > >> >> > ;; > >> >> > loongson2e) > >> >> >-cpuflags="-march=loongson2e -mhard-float > >> >-fno-expensive-optimizations" > >> >> >+cpuflags="-march=loongson2e -mhard-float" > >> >> > ;; > >> >> > loongson2f) > >> >> >-cpuflags="-march=loongson2f -mhard-float > >> >-fno-expensive-optimizations" > >> >> >+cpuflags="-march=loongson2f -mhard-float" > >> >> > ;; > >> >> > esac > >> >> > ;; > >> >> >-- > >> >> >2.1.0 > >> >> > > >> >> > >> >> Hi Michael, could you please help to apply this patch. It has been > >> >> tested on loongson > platform. > >> > > >> >shouldnt this test the compiler the user uses ? its version or something ? > >> > > >> Thank you very much for your review. Be strictly, it's needed to check > >> the compiler version which user uses. > >> Consider that this bug has been fixed about three years and the > >> compiler has been upgraded a lot of times in loongson yum repository. > >> At present, there are still only a few developers will build ffmpeg on > >> loongson platform. The risk of his change is controllable. > >> So, between the simplicity and absolute reliability of the code I chosed > >> the simplicity this > time. > >> Should I still add version check here? > > > >I think there should maybe be a check for the minimum gcc version supported > >t
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
rom: ffmpeg-devel-boun...@ffmpeg.org [mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of >Michael Niedermayer >Sent: Thursday, August 23, 2018 3:27 AM >To: FFmpeg development discussions and patches >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >no-expensive-optimizations > >On Wed, Aug 22, 2018 at 06:11:15PM +0800, Shiyou Yin wrote: >> >-Original Message- >> >From: ffmpeg-devel-boun...@ffmpeg.org >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Michael >> >Niedermayer >> >Sent: Wednesday, August 22, 2018 6:04 AM >> >To: FFmpeg development discussions and patches >> >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >> >no-expensive-optimizations >> > >> >On Tue, Aug 21, 2018 at 04:06:05PM +0800, Shiyou Yin wrote: >> >> >-Original Message- >> >> >From: ffmpeg-devel-boun...@ffmpeg.org >> >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Shiyou Yin >> >> >Sent: Thursday, July 12, 2018 8:44 PM >> >> >To: ffmpeg-devel@ffmpeg.org >> >> >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >> >> >no-expensive-optimizations >> >> > >> >> >The bug in gcc-4.9.x has been fixed in gcc master branch. >> >> >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. >> >> >More bug info see: >> >> >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 >> >> >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html >> >> > >> >> >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f >> >> >Signed-off-by: Shiyou Yin >> >> >--- >> >> > configure | 6 +++--- >> >> > 1 file changed, 3 insertions(+), 3 deletions(-) >> >> > >> >> >diff --git a/configure b/configure index b1a4dcf..17a7ea9 100755 >> >> >--- a/configure >> >> >+++ b/configure >> >> >@@ -4789,13 +4789,13 @@ elif enabled mips; then >> >> > disable mipsdspr2 >> >> > case $cpu in >> >> > loongson3*) >> >> >-cpuflags="-march=loongson3a -mhard-float >> >-fno-expensive-optimizations" >> >> >+cpuflags="-march=loongson3a -mhard-float" >> >> > ;; >> >> > loongson2e) >> >> >-cpuflags="-march=loongson2e -mhard-float >> >-fno-expensive-optimizations" >> >> >+cpuflags="-march=loongson2e -mhard-float" >> >> > ;; >> >> > loongson2f) >> >> >-cpuflags="-march=loongson2f -mhard-float >> >-fno-expensive-optimizations" >> >> >+cpuflags="-march=loongson2f -mhard-float" >> >> > ;; >> >> > esac >> >> > ;; >> >> >-- >> >> >2.1.0 >> >> > >> >> >> >> Hi Michael, could you please help to apply this patch. It has been tested >> >> on loongson platform. >> > >> >shouldnt this test the compiler the user uses ? its version or something ? >> > >> Thank you very much for your review. Be strictly, it's needed to check >> the compiler version which user uses. >> Consider that this bug has been fixed about three years and the >> compiler has been upgraded a lot of times in loongson yum repository. >> At present, there are still only a few developers will build ffmpeg on >> loongson platform. The risk of his change is controllable. >> So, between the simplicity and absolute reliability of the code I chosed the >> simplicity this time. >> Should I still add version check here? > >I think there should maybe be a check for the minimum gcc version supported >then to ensure that no too >old version is used. If you do not want to add teh flag for specific versions >The effect of the bug was IIRC >not trivial to connect to the gcc version so it could leave a developer quite >lost and confused what is >causing it > Hi Michael, please help to review the following updates. diff --git a/configure b/configure index b9c9d0b..08cf48e 100755 --- a/configure +++ b/configure @@ -4796,15 +4796,24 @@ elif enabled mips; then
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
On Wed, Aug 22, 2018 at 06:11:15PM +0800, Shiyou Yin wrote: > >-Original Message- > >From: ffmpeg-devel-boun...@ffmpeg.org > >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of > >Michael Niedermayer > >Sent: Wednesday, August 22, 2018 6:04 AM > >To: FFmpeg development discussions and patches > >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >no-expensive-optimizations > > > >On Tue, Aug 21, 2018 at 04:06:05PM +0800, Shiyou Yin wrote: > >> >-Original Message- > >> >From: ffmpeg-devel-boun...@ffmpeg.org > >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Shiyou Yin > >> >Sent: Thursday, July 12, 2018 8:44 PM > >> >To: ffmpeg-devel@ffmpeg.org > >> >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >> >no-expensive-optimizations > >> > > >> >The bug in gcc-4.9.x has been fixed in gcc master branch. > >> >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. > >> >More bug info see: > >> >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 > >> >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html > >> > > >> >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f > >> >Signed-off-by: Shiyou Yin > >> >--- > >> > configure | 6 +++--- > >> > 1 file changed, 3 insertions(+), 3 deletions(-) > >> > > >> >diff --git a/configure b/configure > >> >index b1a4dcf..17a7ea9 100755 > >> >--- a/configure > >> >+++ b/configure > >> >@@ -4789,13 +4789,13 @@ elif enabled mips; then > >> > disable mipsdspr2 > >> > case $cpu in > >> > loongson3*) > >> >-cpuflags="-march=loongson3a -mhard-float > >-fno-expensive-optimizations" > >> >+cpuflags="-march=loongson3a -mhard-float" > >> > ;; > >> > loongson2e) > >> >-cpuflags="-march=loongson2e -mhard-float > >-fno-expensive-optimizations" > >> >+cpuflags="-march=loongson2e -mhard-float" > >> > ;; > >> > loongson2f) > >> >-cpuflags="-march=loongson2f -mhard-float > >-fno-expensive-optimizations" > >> >+cpuflags="-march=loongson2f -mhard-float" > >> > ;; > >> > esac > >> > ;; > >> >-- > >> >2.1.0 > >> > > >> > >> Hi Michael, could you please help to apply this patch. It has been tested > >> on loongson platform. > > > >shouldnt this test the compiler the user uses ? its version or something ? > > > Thank you very much for your review. Be strictly, it's needed to check the > compiler version which > user uses. > Consider that this bug has been fixed about three years and the compiler has > been upgraded a lot of > times in loongson yum repository. > At present, there are still only a few developers will build ffmpeg on > loongson platform. The risk > of his change is controllable. > So, between the simplicity and absolute reliability of the code I chosed the > simplicity this time. > Should I still add version check here? I think there should maybe be a check for the minimum gcc version supported then to ensure that no too old version is used. If you do not want to add teh flag for specific versions The effect of the bug was IIRC not trivial to connect to the gcc version so it could leave a developer quite lost and confused what is causing it [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB I am the wisest man alive, for I know one thing, and that is that I know nothing. -- Socrates signature.asc Description: PGP signature ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
>-Original Message- >From: ffmpeg-devel-boun...@ffmpeg.org [mailto:ffmpeg-devel-boun...@ffmpeg.org] >On Behalf Of >Michael Niedermayer >Sent: Wednesday, August 22, 2018 6:04 AM >To: FFmpeg development discussions and patches >Subject: Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >no-expensive-optimizations > >On Tue, Aug 21, 2018 at 04:06:05PM +0800, Shiyou Yin wrote: >> >-Original Message- >> >From: ffmpeg-devel-boun...@ffmpeg.org >> >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Shiyou Yin >> >Sent: Thursday, July 12, 2018 8:44 PM >> >To: ffmpeg-devel@ffmpeg.org >> >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >> >no-expensive-optimizations >> > >> >The bug in gcc-4.9.x has been fixed in gcc master branch. >> >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. >> >More bug info see: >> >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 >> >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html >> > >> >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f >> >Signed-off-by: Shiyou Yin >> >--- >> > configure | 6 +++--- >> > 1 file changed, 3 insertions(+), 3 deletions(-) >> > >> >diff --git a/configure b/configure >> >index b1a4dcf..17a7ea9 100755 >> >--- a/configure >> >+++ b/configure >> >@@ -4789,13 +4789,13 @@ elif enabled mips; then >> > disable mipsdspr2 >> > case $cpu in >> > loongson3*) >> >-cpuflags="-march=loongson3a -mhard-float >-fno-expensive-optimizations" >> >+cpuflags="-march=loongson3a -mhard-float" >> > ;; >> > loongson2e) >> >-cpuflags="-march=loongson2e -mhard-float >-fno-expensive-optimizations" >> >+cpuflags="-march=loongson2e -mhard-float" >> > ;; >> > loongson2f) >> >-cpuflags="-march=loongson2f -mhard-float >-fno-expensive-optimizations" >> >+cpuflags="-march=loongson2f -mhard-float" >> > ;; >> > esac >> > ;; >> >-- >> >2.1.0 >> > >> >> Hi Michael, could you please help to apply this patch. It has been tested on >> loongson platform. > >shouldnt this test the compiler the user uses ? its version or something ? > Thank you very much for your review. Be strictly, it's needed to check the compiler version which user uses. Consider that this bug has been fixed about three years and the compiler has been upgraded a lot of times in loongson yum repository. At present, there are still only a few developers will build ffmpeg on loongson platform. The risk of his change is controllable. So, between the simplicity and absolute reliability of the code I chosed the simplicity this time. Should I still add version check here? ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
On Tue, Aug 21, 2018 at 04:06:05PM +0800, Shiyou Yin wrote: > >-Original Message- > >From: ffmpeg-devel-boun...@ffmpeg.org > >[mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of > >Shiyou Yin > >Sent: Thursday, July 12, 2018 8:44 PM > >To: ffmpeg-devel@ffmpeg.org > >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert > >no-expensive-optimizations > > > >The bug in gcc-4.9.x has been fixed in gcc master branch. > >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. > >More bug info see: > >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 > >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html > > > >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f > >Signed-off-by: Shiyou Yin > >--- > > configure | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > >diff --git a/configure b/configure > >index b1a4dcf..17a7ea9 100755 > >--- a/configure > >+++ b/configure > >@@ -4789,13 +4789,13 @@ elif enabled mips; then > > disable mipsdspr2 > > case $cpu in > > loongson3*) > >-cpuflags="-march=loongson3a -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson3a -mhard-float" > > ;; > > loongson2e) > >-cpuflags="-march=loongson2e -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson2e -mhard-float" > > ;; > > loongson2f) > >-cpuflags="-march=loongson2f -mhard-float > >-fno-expensive-optimizations" > >+cpuflags="-march=loongson2f -mhard-float" > > ;; > > esac > > ;; > >-- > >2.1.0 > > > > Hi Michael, could you please help to apply this patch. It has been tested on > loongson platform. shouldnt this test the compiler the user uses ? its version or something ? [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Take away the freedom of one citizen and you will be jailed, take away the freedom of all citizens and you will be congratulated by your peers in Parliament. signature.asc Description: PGP signature ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
Re: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
>-Original Message- >From: ffmpeg-devel-boun...@ffmpeg.org [mailto:ffmpeg-devel-boun...@ffmpeg.org] >On Behalf Of >Shiyou Yin >Sent: Thursday, July 12, 2018 8:44 PM >To: ffmpeg-devel@ffmpeg.org >Subject: [FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert >no-expensive-optimizations > >The bug in gcc-4.9.x has been fixed in gcc master branch. >Loongson released gcc-4.9.3-3.fc21.loongson with this patch. >More bug info see: >https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 >https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html > >Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f >Signed-off-by: Shiyou Yin >--- > configure | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > >diff --git a/configure b/configure >index b1a4dcf..17a7ea9 100755 >--- a/configure >+++ b/configure >@@ -4789,13 +4789,13 @@ elif enabled mips; then > disable mipsdspr2 > case $cpu in > loongson3*) >-cpuflags="-march=loongson3a -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson3a -mhard-float" > ;; > loongson2e) >-cpuflags="-march=loongson2e -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson2e -mhard-float" > ;; > loongson2f) >-cpuflags="-march=loongson2f -mhard-float >-fno-expensive-optimizations" >+cpuflags="-march=loongson2f -mhard-float" > ;; > esac > ;; >-- >2.1.0 > Hi Michael, could you please help to apply this patch. It has been tested on loongson platform. ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
[FFmpeg-devel] [PATCH 1/9] configure: [loongson] revert no-expensive-optimizations
The bug in gcc-4.9.x has been fixed in gcc master branch. Loongson released gcc-4.9.3-3.fc21.loongson with this patch. More bug info see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67736 https://gcc.gnu.org/ml/gcc-patches/2012-05/msg00401.html Change-Id: I780125d4cdee71d40457aaee22126ba0547a2c8f Signed-off-by: Shiyou Yin --- configure | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/configure b/configure index b1a4dcf..17a7ea9 100755 --- a/configure +++ b/configure @@ -4789,13 +4789,13 @@ elif enabled mips; then disable mipsdspr2 case $cpu in loongson3*) -cpuflags="-march=loongson3a -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson3a -mhard-float" ;; loongson2e) -cpuflags="-march=loongson2e -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson2e -mhard-float" ;; loongson2f) -cpuflags="-march=loongson2f -mhard-float -fno-expensive-optimizations" +cpuflags="-march=loongson2f -mhard-float" ;; esac ;; -- 2.1.0 ___ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel