Thanks, Ed! I learned something about hardware from you today ;-)
I wonder if Ed is a Mechanical Engineer or not? Maybe you shouldn't
trust him? ;-)
Art
I don't care if Ed is a burger flipper at McDonald's, he know what he's
talking about ;-)
PROTECTED]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
Paint the edges of the negatives green, and get some Shitake
Stones or what
ever they're called, sold at the high end stereo stores...some
people swear
they improve their sound, so they might improve
Austin Franklin wrote:
Given: That the stepper mechanism is accurate, and not just a piece of
trash...
Then: It would not matter whether the copy is moved or the
scanning head is
moved.
I don't fully agree. One can design a very precise metal screw or other
method
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of rafeb
Sent: 20 July 2001 14:11
To: [EMAIL PROTECTED]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
At 12:03 PM 7/20/01 +0100, Jawed wrote:
Dare I say it, but I
Moving the film via a carrier, which is likely molded plastic, with
plastic gearing, and also having it need to mesh' with the motorized
transport, and being that the carrier is prone to dust and dirt
attraction and the elements, makes it much harder to maintain
integrity of precision
Ed wrote:
One prediction:
a major scanner manufacturer is going to release several
features like this in the next year that will drive several of their
competitors out of the scanner business.
The low-end scanner business is quite competitive - witness
AGFA's recent abandonment of the low-end
Not to worry - I have a Beta VCR and I'm still using it for its intended
purpose.
Maris
- Original Message -
From: Lynn Allen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 22, 2001 8:21 AM
Subject: Re: filmscanners: My replacement 8000 is banding like the first one
Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
models, at least, move the scanning unit (CCD, lens and lighting
source and any mirrors), and not the film.
Yes, they move the film into frame position, but then the fine movement
is done by moving the scanner head.
This does
Lynn Allen wrote:
Given: That the stepper mechanism is accurate, and not just a piece of
trash...
Then: It would not matter whether the copy is moved or the scanning head is
moved.
I don't fully agree. One can design a very precise metal screw or other
method for moving the CCD head
Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
models, at least, move the scanning unit (CCD, lens and lighting
source and any mirrors), and not the film.
This does probably allow for more accurate scans in multi-pass
situations.
Why would that be?
Given: That the stepper mechanism is accurate, and not just a piece of
trash...
Then: It would not matter whether the copy is moved or the
scanning head is
moved.
I don't fully agree. One can design a very precise metal screw or other
method for moving the CCD head assembly, in
In a message dated 7/21/2001 5:14:06 AM EST, [EMAIL PROTECTED] writes:
Actually, Nikon LS2000 and LS30 and I suspect all the newer 35mm
models, at least, move the scanning unit (CCD, lens and lighting
source and any mirrors), and not the film.
Yes, every CoolScan Nikon scanner I've seen,
Entlich [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:44 AM
To: [EMAIL PROTECTED]
Subject:Re: filmscanners: My replacement 8000 is banding like the
first one :-(
Lynn Allen wrote:
Given: That the stepper mechanism is accurate, and not just a piece of
trash
Using a microswitch or an optical sensor to detect the
zero position is less accurate than the resolution of
most scanners, which makes multi-pass multi-scanning
impractical with these scanners.
I disagree. They don't have to re-home for each pass. Once home as
ascertained, and then the
In a message dated 7/21/2001 12:29:30 PM EST, [EMAIL PROTECTED] writes:
Using a microswitch or an optical sensor to detect the
zero position is less accurate than the resolution of
most scanners, which makes multi-pass multi-scanning
impractical with these scanners.
I disagree.
= Original Message From Austin Franklin [EMAIL PROTECTED] =
Also since the 8000 presumably has a heavier scanning head than
the smaller
scanners (more ccd etc), the mechanical constraints are more
serious and it
may therefore be the most sensitive to such things and which may not
I don't know how heavy the ED 8000 is, but these days most electronics
have minimal heft to them and aren't very solid.
I have found that as a result, using a solid platform for devices like
film scanners might help them to be less likely to create sympathetic
vibration in the shelf or table
At 12:03 PM 7/20/01 +0100, Jawed wrote:
Dare I say it, but I suspect a scanner moving the film is less accurate
than
a scanner that moves the scan head.
I disagree, and I'm sure Austin will chime in here too g.
All film scanners I've worked with move the film -- except
for flatbeds with
Also since the 8000 presumably has a heavier scanning head than
the smaller
scanners (more ccd etc), the mechanical constraints are more
serious and it
may therefore be the most sensitive to such things and which
may not show
up as problems on their 35mm scanners.
This scanner
I don't know how heavy the ED 8000 is, but these days most electronics
have minimal heft to them and aren't very solid.
Somewhat true, but power supplies can still be quite heavy. It is 19.8 lbs.
Not really light, but certainly not all that heavy.
Your suggestion of putting it on a solid
]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
Date: Fri, 20 Jul 2001 09:10:57 -0400
At 12:03 PM 7/20/01 +0100, Jawed wrote:
Dare I say it, but I suspect a scanner moving the film is less accurate
than
a scanner that moves the scan head.
I disagree, and I'm
On Fri, 20 Jul 2001, Lynn Allen wrote:
Not that I really want to comment on this at all, but I've found that if I
don't, maybe nobody will (too often, and not often enough). :-)
Given: That the stepper mechanism is accurate, and not just a piece of
trash...
Then: It would not matter
Rafe wrote:
...our entire job in this listserv sometimes seems to be second-guessing
the manufacturers and telling them what they did wrong. g
Seems to me they give us ample opportunity! ;-)
My personal guess is that the better
way is the one that moves the smaller
mass -- all else being
Re the banding problem
My first reaction was that the scan is being done off a native
resolution 4000 dpi, 2000 dpi, 1333.333 dpi, 1000dpi etc and that software
interpolation was/is being done.
After a few of the other comments about possible mechanical
problems I
On Thu, 19 Jul 2001, Stephen Kogge wrote:
So is it possible that your scanner is out running your system,
the scanner stops and has to back up. It could also be a similar
problem that the data rate from the CCD head is higher than what the
Scanner interface can handle and the
Stephen Kogge wrote:
Re the banding problem
My first reaction was that the scan is being done off a native
resolution 4000 dpi, 2000 dpi, 1333.333 dpi, 1000dpi etc and that software
interpolation was/is being done.
After a few of the other comments about
Title: RE: filmscanners: My replacement 8000 is banding like the first one :-(
This is a possibility. As I mentioned, when I had the LS8000, it did not always band. Sometimes it would and sometimes it wouldn't. Nikon tech support did mention moving the scanner to a different location to rule
On Thu, 19 Jul 2001, Lawrence Smith wrote:
Nikon tech support advised me to send the unit in for service this morning.
They also said that they believed that service has been able 'fix' the
banding issue. They could not tell me however what they believed the issue
really was. They also
Does the scanner seem to stop and start or is it a smooth scan?
This is completely out of left field, but could it be a power supply
(in the scanner) issue? Someone else commented on how this only seems to
show up with scanners using stepper motors... Could the stepper motors
Chris claims that Nikon service has not recived a
unit for service, yet, for the banding problem.
That *may* possibly be true, if Lawrence's 1st 8000
went back to the retailer directly.
These guys need to get their story straight. I believe it was Chris I was
speaking with this morning
]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
Date: Thu, 19 Jul 2001 15:49:02 -0400
Chris claims that Nikon service has not recived a
unit for service, yet, for the banding problem.
That *may* possibly be true, if Lawrence's 1st 8000
went back
This is completely out of left field, but could it be a power supply
(in the scanner) issue? Someone else commented on how this only seems to
show up with scanners using stepper motors... Could the stepper motors
cause spikes in the PSU that could interfere with the imaging side of
Title: RE: filmscanners: My replacement 8000 is banding like the first one :-(
I no longer have my LS8000 as I've mentioned. However, Camera World did want my Nikon case # so they could return it. If anyone wants the case #, I'll supply it.
Paul Wilson
-Original Message-
From
Stepper motors are known to resonate
a certain step-rates, for example.
Sorry, and I don't mean to be glib...but perhaps having an 85 pound scanner
may be an asset ;-)
]]On Behalf Of Austin Franklin
Sent: 19 July 2001 23:08
To: [EMAIL PROTECTED]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
Stepper motors are known to resonate
a certain step-rates, for example.
Sorry, and I don't mean to be glib...but perhaps having an 85
]]On Behalf Of Jawed Ashraf
Sent: Thursday, July 19, 2001 8:25 PM
To: [EMAIL PROTECTED]
Subject: RE: filmscanners: My replacement 8000 is banding like the first
one :-(
I tried sitting on my scanner (I'm at least 80Kg) but it made no
difference,
the little begger still makes a rattling noise
At 01:43 20/07/01, rafe wrote:
Stepper motors are known to resonate
a certain step-rates, for example.
Yes...
Given that Nikon were reported to be having development problems with the
higher res stepper motor for the new generation of product including the
8000, and given that jaggies is
Also since the 8000 presumably has a heavier scanning head than
the smaller
scanners (more ccd etc), the mechanical constraints are more
serious and it
may therefore be the most sensitive to such things and which may not show
up as problems on their 35mm scanners.
This scanner moves the
Hi!
My replacement 8000 was humming right along and I thought I was home free
but I scanned a slide with lots of deep blue/purple sky and sure enough,
banding galore. I have a tag to send it back to Nikon but I'm a bit
skeptical that it will make much difference at this point. If my wife
I can and will!
Lawrence
Could You publish any image on your site with visible banding? I'm very
curious how it looks like.
--
Marcin M. Nagraba
e-mail: [EMAIL PROTECTED]
--
Znudzilo Ci sie logo w komorce?
Wgraj nowe [ http://komorki.onet.pl/dodatki.html ]
On Wed, 18 Jul 2001 08:53:03 -0400 Lawrence Smith ([EMAIL PROTECTED])
wrote:
My replacement 8000 was humming right along and I thought I was home free
but I scanned a slide with lots of deep blue/purple sky and sure enough,
banding galore.
Do you think this is just showing banding which
Tony,
I think it is happening everywhere but is most obvious in the blue regions.
Lawrence
Do you think this is just showing banding which is happening
generally but
hard to see, or is it just in this area?
Regards
Tony Sleep
http://www.halftone.co.uk - Online portfolio
42 matches
Mail list logo