At 20:30 10-07-01 -0400, rafeb wrote:
Your complaint regarding NikonScan 3.1 being buggy
is surprising to me. I had some initial problems
getting NS installed, but it has not been remotely
buggy since then. The installation issues turned
out to be due to device conflicts.
Which leads me to
At 06:51 AM 7/11/01 -0400, Cary Enoch Reinstein wrote:
[Rafe B:]
Your complaint regarding NikonScan 3.1 being buggy
is surprising to me. I had some initial problems
getting NS installed, but it has not been remotely
buggy since then. The installation issues turned
out to be due to device
Your complaint regarding NikonScan 3.1 being buggy
is surprising to me. I had some initial problems
getting NS installed, but it has not been remotely
buggy since then. The installation issues turned
out to be due to device conflicts.
Which leads me to suspect that a good number of
Title: SS120 first impressions and a few questions.
Hello All,
I received my SS120 yesterday and my first impressions are mostly quite favorable vs. the LS-8000. I've not sure I had enough time with the LS8000 (or the SS120) to truly differentiate scan quality but both are very good. Also,
The Polaroid 35 mm slide holder, while basic, works perfectly well in my
experience.
-Original Message-
From: Wilson, Paul [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 10, 2001 1:57 PM
To: '[EMAIL PROTECTED]'
Subject: filmscanners: SS120 first impressions and a few questions.
I
Paul, thanks for (yet another) LS-120 review.
A couple of comments if I may.
Your complaint regarding NikonScan 3.1 being buggy
is surprising to me. I had some initial problems
getting NS installed, but it has not been remotely
buggy since then. The installation issues turned
out to be
At 05:37 PM 7/10/01 -0700, Slavitt, Howard wrote:
I too wonder whether the Polaroid may have problems with dust getting insde.
I strongly suspect that with either the SS120 or Nikon 8000ED scan quality
may decrease over time as more dust gets inside the machine. You should
definitely put a dust
Title: RE: filmscanners: SS120 first impressions and a few questions.
Hi Rafe,
It was definitely buggy on my system. Actually, when it worked it worked well. When was the problem. It would often crash for no apparent reason. Also, it often had problems recognizing that there was a film
