ubject: filmscanners: Scanning Kodak sleaved negatives?
Is there an easy way to remove the "slevaes" on Kodak Premium
processed
negatives so I can scan them? The sleaves are glued on the
negatives.
Pulling them off is difficult and may damage the negatives.
Mike Duncan
At 9:49 PM -0700 1/10/01, Bud wrote:
I just peel the plastic off while holding the
neg on an edge with a forceps. I haven't had any problems doing this. If you
ask Kodak not to sleeve the negs under "special instructions" on the
envelope, they may - that's a big may - pay attention and not sleeve
acceptable.
if it isn't, they will reprint them at no-charge (of course the negs are
then sleeved).
- Original Message -
From: "Mike Duncan" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 11, 2001 9:55 AM
Subject: Re: filmscanners: Scanning Kodak sleaved negatives?
Is there an easy way to remove the "slevaes" on Kodak Premium processed
negatives so I can scan them? The sleaves are glued on the negatives.
Pulling them off is difficult and may damage the negatives.
Mike Duncan
PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mike Duncan
Sent: Wednesday, January 10, 2001 8:59 AM
To: [EMAIL PROTECTED]
Subject: filmscanners: Scanning Kodak sleaved negatives?
Is there an easy way to remove the "slevaes" on Kodak Premium processed
negatives so I can
not sleeve the
negs. Fuji labs do the same thing. Seems like that plastic sleeve would
effect the image quality when printing.
- Original Message -
From: "Mike Duncan" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 10, 2001 9:58 AM
Subject: filmscanners: Scanning Kod