Re: [Flashcoders] :: mp3 not playing in IE ::
Thanks a lot. But, i don't have ZoneAlarm installed anywhere. Any idea what could else be be causing the problem. --- Arin Marc Hoffman [EMAIL PROTECTED] wrote: Same problem for me was caused by ZoneAlarm. The MP3 would get downloaded into cache. It would also play directly in the browser using Windows Media Player. But it wouldn't play in Flash until I disabled ZoneAlarm and eventually tweaked the ZoneAlarm settings (sorry, I don't recall what I changed in ZoneAlarm). - Marc At 09:29 PM 6/25/2006, you wrote: Hi, I encountered a frustrating problem reagarding mp3 playback in flash in IE. The x.mp3 when played locally through the y.swfand browser(IE 6+),works fine , but y.swf and x.mp3 are placed at a particular domain, and accessed through same browser(IE 6+),the x.mp3 fails to play.The x.mp3 comes the temp internet files of the local machine but y.swf just dosent play s.swf. There is no problem of cross domain policy found in this case. Anyone, encountered such problem recently? If yes, got any solution ? Please, help! Thanks, Arin __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com - Ring'em or ping'em. Make PC-to-phone calls as low as 1¢/min with Yahoo! Messenger with Voice. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] Fjax... does this seem ridiculous to anyone else?
Doesn't work with Opera 9! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ryanm Sent: 23 June 2006 09:35 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Fjax... does this seem ridiculous to anyone else? http://www.fjax.net/ ryanm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Junior Developer Flash/Flex Salary?
Lee, Adjusted for currency, $30k american is only around £16.5k. The tax is probably higher in the UK though. Hth, Alias On 6/22/06, Lee McColl-Sylvester [EMAIL PROTECTED] wrote: Commercial experience is totally different to working experience. I've 7 years professional commercial experience in Flash, 3 years commercial experience in .NET, 7 years in SQL Server, 2 years in Oracle, have been director twice plus have a huge list of other abilities, and all I can get is £30k a year. Damn bloody low british salaries :-( If I were you, I'd be happy with yer 55k :-P -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tristan Sent: 20 June 2006 16:47 To: Flashcoders mailing list Subject: [Flashcoders] Junior Developer Flash/Flex Salary? Does 30-55K a year sound right with benefits for a junior developer? I have a college degree and an extensive IT background but, I'm just now getting into a professional job environment developing but, I have been using flash for some time now. 30K sounds wa too low, would you agree? If someone had 2-3 years experience, what should a flash/flex developer get? What should they start at? Thanks T ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] transparent background in Projector (Screenweaver)
Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time... -- - Franto http://blog.franto.com http://www.flashcoders.sk ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] transparent background in Projector (Screenweaver)
Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time... -- - Franto http://blog.franto.com http://www.flashcoders.sk -- - Franto http://blog.franto.com http://www.flashcoders.sk ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] HELP : File Access in FLASH
Hi everybody. I know that subject appears in a lot of messages in forum, but i have a related problem. I'm finishing one project. Only SAVE/LOAD Operations and another issues like Full-Screen with a fixed resolution to 1024zx768 are pending. This project is one complex kiosk-type application for MAC osX and Windows (Both systems) Now i have to buy one third party app like mdm zinc or mProjector. mProjector - it appears to be old fashioned. F.e. the screen resolution - it only let me 800x600. Zinc - it appears like a bug-montain-code-software. I'm using last version in trial mode and things like opening a Dialog box for choose a file contains a bug (press cancel button and crashes). Forum of MDM is one kind of hell and somebody said that this bug was fixed in new version and it's not true. People in forum are lost and ask for questions with weak answers. And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] HELP : File Access in FLASH
Hi everybody. I know that subject appears in a lot of messages in forum, but i have a related problem. I'm finishing one project. Only SAVE/LOAD Operations and another issues like Full-Screen with a fixed resolution to 1024zx768 are pending. This project is one complex kiosk-type application for MAC osX and Windows (Both systems) Now i have to buy one third party app like mdm zinc or mProjector. mProjector - it appears to be old fashioned. F.e. the screen resolution - it only let me 800x600. Zinc - it appears like a bug-montain-code-software. I'm using last version in trial mode and things like opening a Dialog box for choose a file contains a bug (press cancel button and crashes). Forum of MDM is one kind of hell and somebody said that this bug was fixed in new version and it's not true. People in forum are lost and ask for questions with weak answers. And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] HELP : File Access in FLASH
1: Take a look at SWFStudio as an alternative projector creation software. www.northcode.com 2: As for the different levels. Using levels makes the flash player treat each movie in a different level as separate movies. They cannot access each others libraries or code. I had to use levels as a workaround in the past for using assets in the libraries of dynamically loaded swf's but this led to more issues. Best thing is to not use levels for loading movies if you need to share assets from loaded libraries (I am assuming this is why you are using levels) you should look into using shared libraries. If you import one movieclip from a shared library into the host library include that shared movieclip on the timeline it will force all other available assets in that library to become available in the host movie. 3: are you including the path to the mdm intrinsic classes in the publish settings for your movie? The only reason I can think that the movie will not compile on the lines you use the mdm classes is that It cannot see them. Hth Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of julian atienza Sent: 26 June 2006 12:18 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] HELP : File Access in FLASH Hi everybody. I know that subject appears in a lot of messages in forum, but i have a related problem. I'm finishing one project. Only SAVE/LOAD Operations and another issues like Full-Screen with a fixed resolution to 1024zx768 are pending. This project is one complex kiosk-type application for MAC osX and Windows (Both systems) Now i have to buy one third party app like mdm zinc or mProjector. mProjector - it appears to be old fashioned. F.e. the screen resolution - it only let me 800x600. Zinc - it appears like a bug-montain-code-software. I'm using last version in trial mode and things like opening a Dialog box for choose a file contains a bug (press cancel button and crashes). Forum of MDM is one kind of hell and somebody said that this bug was fixed in new version and it's not true. People in forum are lost and ask for questions with weak answers. And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] HELP : File Access in FLASH
Not sure that I understand your poblem. I have used these apps, and SWFKit and they open dialogue boxes etc without any problems. Make sure that you are prolperly including any files to be used into your .exe files. On 6/26/06, julian atienza [EMAIL PROTECTED] wrote: Hi everybody. I know that subject appears in a lot of messages in forum, but i have a related problem. I'm finishing one project. Only SAVE/LOAD Operations and another issues like Full-Screen with a fixed resolution to 1024zx768 are pending. This project is one complex kiosk-type application for MAC osX and Windows (Both systems) Now i have to buy one third party app like mdm zinc or mProjector. mProjector - it appears to be old fashioned. F.e. the screen resolution - it only let me 800x600. Zinc - it appears like a bug-montain-code-software. I'm using last version in trial mode and things like opening a Dialog box for choose a file contains a bug (press cancel button and crashes). Forum of MDM is one kind of hell and somebody said that this bug was fixed in new version and it's not true. People in forum are lost and ask for questions with weak answers. And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] HELP : File Access in FLASH
And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? Screenweaver HX is still at Beta stage (http://haxe.org/swhx) but might be enough for what you need to do. There is not yet fullscreen support but it will be part of 1.0 in a few weeks. Nicolas ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] HELP : File Access in FLASH
Hi, why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! Try following the instructions on this forum post: http://www.mdmforum.com/forum/index.php?showtopic=11941 It shows you how to install the mdm class package - this should get rid of any compilation errors from mdm code. For whatever reason Zinc doesn't install these classes to your classpath as part of its own install - so your compiler will naturally complain. Hopefully that'll stop some of the tears :) David Thompson Lightmaker _ The information transmitted in this email is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. _ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of julian atienza Sent: 26 June 2006 12:29 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] HELP : File Access in FLASH Hi everybody. I know that subject appears in a lot of messages in forum, but i have a related problem. I'm finishing one project. Only SAVE/LOAD Operations and another issues like Full-Screen with a fixed resolution to 1024zx768 are pending. This project is one complex kiosk-type application for MAC osX and Windows (Both systems) Now i have to buy one third party app like mdm zinc or mProjector. mProjector - it appears to be old fashioned. F.e. the screen resolution - it only let me 800x600. Zinc - it appears like a bug-montain-code-software. I'm using last version in trial mode and things like opening a Dialog box for choose a file contains a bug (press cancel button and crashes). Forum of MDM is one kind of hell and somebody said that this bug was fixed in new version and it's not true. People in forum are lost and ask for questions with weak answers. And it's strange... my app is created with multiple swf's loaded in several levels... where i have to put the mdminit() command ? in every swf? and more: why when i compile swf that uses mdm sentences it compiles with error? :'( i will cry! I'm desperate. What i have to do? some ideas? ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Flash for forums
The highly important and common feature for Forums is the ability to paste HTML, perform clean and efficient searches, insert images from other sites/URLs, embed flash animations, right-click to open links posted links in new tabs/windows, paste code, harcore forum users even cherish their custom footers. Most of these functions wouldn't be as effective in a flash front-end. On 6/25/06, Count Schemula [EMAIL PROTECTED] wrote: I'm on a few vBulletin powered forums and they work very well. Bulletin boards are far superior to e-mail lists in almost everyway. I've been on e-mail lists since before there was a web, and, really, there is no comparison to how much more useful 100,000 threaded conversations are in a bulletin board compared to an e-mail list. On 6/24/06, Josh Santangelo [EMAIL PROTECTED] wrote: vBulletin's current version has many AJAXy features which enable interactions similar to what you describe. It's not free, but it's not expensive either. http://vbulletin.com/ ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] transparent background in Projector (Screenweaver)
Try using SWFStudio - i know the transparent bg feature on theirs doesn't kill yer cpu. Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time... -- - Franto http://blog.franto.com http://www.flashcoders.sk ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] loadvars vs xml onData
Anyone know why loadvars.onData gets results quicker than xml.onData? Did a bunch of average tests and xml is noticably slower (5-10 ms) - Andreas ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Re: checking in
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I have to solve one thing yet and test this new software at one of our schools before we move to this new version number of DCG-150. When I have this ready we will be ready for you to image the drives when they are shipped. I have done alot of work to make this easy for us. Jennie Forman wrote: Hi Graham, It wouldn't be hard at all to change the product name! I will just get some new model # badges ordered for you. So are you completely done with the DCG-100 stuff? If so, I'll have my branding manager obsolete the model # badges so that there is no confusion. Jennie Forman MBX Account Manager 888.440.1414 Toll Free 877-520-4629 Direct Line 847-852-9803 Cell Phone [EMAIL PROTECTED] AIM: mbxjennie Corporate Headquarters 1101 Brown Street Wauconda, IL 60084 -Original Message- From: Graham Pearson [mailto:[EMAIL PROTECTED] Sent: Monday, June 26, 2006 6:30 AM To: Jennie Forman Subject: Re: checking in -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Just a quick note on how hard would it be to change the DCG-100 to DCG-150. I am working on a new version of this product and getting all of my ducks in a row before I bring out a new product. Everything else with the hardware will stay the same. Jennie Forman wrote: Hi Graham, Thank you for the feedback on the RMA issues. I am hoping that soon we can get back to imaging your hard drives for you here at MBX. There are a lot of hardware problems that can be caught by simply installing an OS. Without an OS, our testing capabilities are somewhat limited. Perhaps as an interim solution we could just do a base install of your OS to run the tests, and wipe it clean before we ship it out. Any thoughts on that? What version of Linux are you currently using? Jennie Forman MBX Account M - -- Graham Pearson, System Administrator / Application Developer Northern Indiana Educational Services Center Mishawaka, IN 46544 Voice (866) 254-5322 or (574) 254-5210 / Fax (574) 254-0148 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) Comment: GnuPT 2.6.2.1 by EQUIPMENTE.DE Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEn+mrrwdok4nP6d0RAn8NAJ0QAeBOn023vwFE6QgJAPtF4AgwhQCeIVD1 dhx1uy+WHmeYMA3WHCS+CNU= =WezP -END PGP SIGNATURE- ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] optimizing an animation?
hi! i have a performance problems with a site. the site has four content areas with navigation between them, so that when you click on an icon the section zooms in from and icon size to full screen and the current sections zooms out at the same time. zooming and positioning is done with zeh fernando's mc_tween. the problem here is simple: the animation chokes. it almost looks as if there was a start frame, an end one and two or three frames displayed in between (it takes around a second). also there is a section with a news. news are diplsayed as list of titles. when clicked an item expands pushing the list down and the news copy shows in this space. textfields are created dynamically as the news are read form an xml file. backgound and buttons are attached dynamically too. the problem: it chokes too. this is weirded as tweening is very bad for the first time but then i smooths. any hints about how to address this? how to optmimize animation? what to use and what to avoid? thanks, michal ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] li color
Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Transparent background in projector (Screenweaver)
Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time.. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Transparent background in projector (Screenweaver)
Hi Franto, That's the fourth time I've had your email... Gmail doesn't automatically tag your outgoing mail, and ignores it when it arrives back at your mailbox - so you won't necessarily see it against a Flashcoders tag. It _has_ been sent, tho' - just look at your Sent mailbox. HTH, Ian On 6/26/06, franto [EMAIL PROTECTED] wrote: Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time.. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Transparent background in projector (Screenweaver)
Hi Ian, thanks, i know, that i will not see my message, but after each email I've sent, there is notification, that email is not received because of wrong email address :(( i do not know why, because all the time i'm using this address, and everytime everything works... So i thought that there is some strange problem with list (no incomming emails for list) but now i can see new messages, so i've posted message againbut still i have same response...wrong emailso I apologize for inconvience... if someone know, what's the silution of my problem..let me know Thank you On 6/26/06, Ian Thomas [EMAIL PROTECTED] wrote: Hi Franto, That's the fourth time I've had your email... Gmail doesn't automatically tag your outgoing mail, and ignores it when it arrives back at your mailbox - so you won't necessarily see it against a Flashcoders tag. It _has_ been sent, tho' - just look at your Sent mailbox. HTH, Ian On 6/26/06, franto [EMAIL PROTECTED] wrote: Hi all, i've made projector (walking insect) with transparent background, and it's killing all my CPU. there is 3 pieces of them, i've tried just 3 squares and it is the same, i can see on my comp redrawing sprites and have 50% CPU (dual processor, 2 GHZ) on other computers, redrawing is not visible, but 100% CPU (or 50% for dual) I think the problem is creating dynamic mask (flash with desktop), but I dont know how to fix it. Should I use other projector then Screenweaver? Btw, i found same problem with some GameHouse game, when it was in fullscreen, all was right, but when i switch off fullscreen and game was in transparent rectangle (desktop was visible outside the game), mouse was flickering, CPU full, i almost cant do anything but another games was ok after switching off fullscreen, so this can be problem with some settings maybe... i dont know, maybe some games was Shockwave, some Flash, really dont know, but I think 3 movings squares on desktop should not take 100% CPU Can someone advice me, what's is the problem? Thanks many time.. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- - Franto http://blog.franto.com http://www.flashcoders.sk ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] li color
Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Transparent background in projector (Screenweaver)
Hi Franto, I think it's just someone on the list whose email is now invalid - I'm getting the same error when I post. I'm afraid I can't help with the original problem! Ian On 6/26/06, franto [EMAIL PROTECTED] wrote: Hi Ian, thanks, i know, that i will not see my message, but after each email I've sent, there is notification, that email is not received because of wrong email address :(( i do not know why, because all the time i'm using this address, and everytime everything works... So i thought that there is some strange problem with list (no incomming emails for list) but now i can see new messages, so i've posted message againbut still i have same response...wrong emailso I apologize for inconvience... if someone know, what's the silution of my problem..let me know Thank you ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Text arching
Hello, I have following question. I saw nike's unifrm builder, Nike Uniform Builder(http://www.niketeam.com/v2/new/Sport...T=BBMCAT=UNI), they built uniform generator using Flash, the only thing wondering me is, how did they manage to arch the text, if anybody has any clue then I would be very happy to see little bit of action scripting. I want different arching with click of a button or something like that, I am attaching a sample of arching that I am looking for! If anybody figures it out. thanks, Umesh Patel Dynamic Team Sports 416.496.8600 --- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender via reply mail and delete all copies form your records. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Employees of Dynamic Team Sports are expressly required not to make defamatory statements and not to infringe or authorize any infringement of copyright or any other legal right by email communications. Any such communication is contrary to company policy and outside the scope of the employment of the individual concerned. The company will not accept any liability in respect of such communication, and the employee responsible will be personally liable for any damages or other liability arising. The company accepts no liability for any damage caused by any virus transmitted by this email.’ ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
Ick. Ok - thanks. I think I'll just tell the client it's a limitation of Flash. Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:flashcoders- [EMAIL PROTECTED] On Behalf Of Adrian Park Sent: Monday, June 26, 2006 11:23 AM To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
You can do this with CSS... You can even exchange the bullets for images. CSS is pure power if you know what you're doing. Check this out. www.jessett.com/web_sites/css/bullet_graphics.shtml or more on topic www.frontpagewebmaster.com/m-195255/tm.htm be sure to read the whole thread. Sometime you just have to tinker. Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Park Sent: 26 June 2006 16:23 To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Transparent background in projector (Screenweaver)
Oh ok, already i found out that as well :)) But anyway, thanks at least for your help. I'm trying to get solution on my blog too http://www.franto.com/blog2/transparent-background-in-projector-screenweaver Franto On 6/26/06, Ian Thomas [EMAIL PROTECTED] wrote: Hi Franto, I think it's just someone on the list whose email is now invalid - I'm getting the same error when I post. I'm afraid I can't help with the original problem! Ian On 6/26/06, franto [EMAIL PROTECTED] wrote: Hi Ian, thanks, i know, that i will not see my message, but after each email I've sent, there is notification, that email is not received because of wrong email address :(( i do not know why, because all the time i'm using this address, and everytime everything works... So i thought that there is some strange problem with list (no incomming emails for list) but now i can see new messages, so i've posted message againbut still i have same response...wrong emailso I apologize for inconvience... if someone know, what's the silution of my problem..let me know Thank you ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- - Franto http://blog.franto.com http://www.flashcoders.sk ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
Actually, just go here www.sens.buffalo.edu/assistance/advwebpage/bullets.html Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Park Sent: 26 June 2006 16:23 To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
I use css in my Flash and changed the color of both UL and LI colors
and it worked fine.
li {color: #9A9CA6;font-weight: 900;font-family: Arial;font-size:
16px;display: block}
-- Chuck
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
RE: [Flashcoders] li color
Sorry Jason, I thought you were referring to the text. Why not use ul and then use an image as the bullet? -- Chuck ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] li color
Lee McColl-Sylvester schrieb: You can do this with CSS... You can even exchange the bullets for images. CSS is pure power if you know what you're doing. Check this out. www.jessett.com/web_sites/css/bullet_graphics.shtml or more on topic www.frontpagewebmaster.com/m-195255/tm.htm be sure to read the whole thread. Sometime you just have to tinker. Lee go back sleeping :-) micha ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Text arching
Hi Umesh, I have asked a friend of mine, and he came up with this code and example: http://richardleggett.co.uk/downloads/flash/StringWidth/ I hope it helps! Yours, Weyert de Boer ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
Thanks - yes, I knew about that with CSS, but didn't know if that would work with Flash HTML textfields. This method works inside the Flash player? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:flashcoders- [EMAIL PROTECTED] On Behalf Of Lee McColl-Sylvester Sent: Monday, June 26, 2006 11:44 AM To: Flashcoders mailing list Subject: RE: [Flashcoders] li color You can do this with CSS... You can even exchange the bullets for images. CSS is pure power if you know what you're doing. Check this out. www.jessett.com/web_sites/css/bullet_graphics.shtml or more on topic www.frontpagewebmaster.com/m-195255/tm.htm be sure to read the whole thread. Sometime you just have to tinker. Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Park Sent: 26 June 2006 16:23 To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
Yeah yeah, I know :-P Hey, I'm not the only one convicted of not reading the whole email ;) Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Stuhr Sent: 26 June 2006 16:48 To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Lee McColl-Sylvester schrieb: You can do this with CSS... You can even exchange the bullets for images. CSS is pure power if you know what you're doing. Check this out. www.jessett.com/web_sites/css/bullet_graphics.shtml or more on topic www.frontpagewebmaster.com/m-195255/tm.htm be sure to read the whole thread. Sometime you just have to tinker. Lee go back sleeping :-) micha ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
I dunno... Sorry, I'm guilty of not reading the whole post. Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Merrill, Jason Sent: 26 June 2006 16:51 To: Flashcoders mailing list Subject: RE: [Flashcoders] li color Thanks - yes, I knew about that with CSS, but didn't know if that would work with Flash HTML textfields. This method works inside the Flash player? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:flashcoders- [EMAIL PROTECTED] On Behalf Of Lee McColl-Sylvester Sent: Monday, June 26, 2006 11:44 AM To: Flashcoders mailing list Subject: RE: [Flashcoders] li color You can do this with CSS... You can even exchange the bullets for images. CSS is pure power if you know what you're doing. Check this out. www.jessett.com/web_sites/css/bullet_graphics.shtml or more on topic www.frontpagewebmaster.com/m-195255/tm.htm be sure to read the whole thread. Sometime you just have to tinker. Lee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Park Sent: 26 June 2006 16:23 To: Flashcoders mailing list Subject: Re: [Flashcoders] li color Even using a stylesheet I have not been able to change the colour of bullets in html text fields. The only way I've been able to do it is to embed the font, nest the text field in a movie clip and tint it - not nice! Adrian P On 6/26/06, Merrill, Jason [EMAIL PROTECTED] wrote: Is there any way to change the color of the bullets made with li tags in a Flash HTML text field to another color? Seems the only thing I get it black even with system fonts set to color. Does it actually require applying a stylesheet? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] optimizing an animation?
I've seen this mostly when the MC being tweened either has a lot of vector information or large (physically) bitmaps. - If it's all vector being zoomed, either optimize and cut down on the vectors or, create a new frame in the MC with 'some elements' only, goto that frame while zooming, do a callback function on the MC_tween to then go back to the frame you want once the tween is complete - If it's bitmaps being zoomed, they may have too much information to render quickly - try reducing the amount of pixels in the bitmap (like 50% scale) then stretch it 200% when it's dynamically attached - this will lower the quality but speed up the zoom (you can try this just to test if it is the bitmap causing the problem). - In general, disable elements one at a time and keep testing the movie to find the offending elements that are causing the chugging. On 6/27/06, michal jaworski [EMAIL PROTECTED] wrote: hi! i have a performance problems with a site. the site has four content areas with navigation between them, so that when you click on an icon the section zooms in from and icon size to full screen and the current sections zooms out at the same time. zooming and positioning is done with zeh fernando's mc_tween. the problem here is simple: the animation chokes. it almost looks as if there was a start frame, an end one and two or three frames displayed in between (it takes around a second). also there is a section with a news. news are diplsayed as list of titles. when clicked an item expands pushing the list down and the news copy shows in this space. textfields are created dynamically as the news are read form an xml file. backgound and buttons are attached dynamically too. the problem: it chokes too. this is weirded as tweening is very bad for the first time but then i smooths. any hints about how to address this? how to optmimize animation? what to use and what to avoid? thanks, michal ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] optimizing an animation?
Another approach is to switch to a single bitmap for the whole MC, scale and tween, then switch back to your vector version once the tween has finished. Ian On 6/26/06, Mick G [EMAIL PROTECTED] wrote: I've seen this mostly when the MC being tweened either has a lot of vector information or large (physically) bitmaps. - If it's all vector being zoomed, either optimize and cut down on the vectors or, create a new frame in the MC with 'some elements' only, goto that frame while zooming, do a callback function on the MC_tween to then go back to the frame you want once the tween is complete - If it's bitmaps being zoomed, they may have too much information to render quickly - try reducing the amount of pixels in the bitmap (like 50% scale) then stretch it 200% when it's dynamically attached - this will lower the quality but speed up the zoom (you can try this just to test if it is the bitmap causing the problem). - In general, disable elements one at a time and keep testing the movie to find the offending elements that are causing the chugging. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] What AS edting features do you want in BBEdit?
Hello all, After pleading with BareBones software a couple of times to offer native support for ActionScript, I finally seem to have their attention... They've asked me what specific AS editing features (besides code coloring) would be most valuable. I'm just one guy, and my requests would be integration with MTASC and Command-Enter to test movie. What features do the rest of the Mac ActionScripters want to see in BBEdit? I'll compile respones into a feature request list and send it it Bare Bones. thanks very much! -Steven __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
Have an example of how that would work in Flash? Jason Merrill Bank of America Learning Organization Effectiveness - Technology Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:flashcoders- [EMAIL PROTECTED] On Behalf Of Lewis, Chuck Sent: Monday, June 26, 2006 11:47 AM To: Flashcoders mailing list Subject: RE: [Flashcoders] li color Sorry Jason, I thought you were referring to the text. Why not use ul and then use an image as the bullet? -- Chuck ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] li color
I use css in my Flash and changed the color of both UL and LI
colors
and it worked fine.
That worked, thanks!
Jason Merrill
Bank of America
Learning Organization Effectiveness - Technology Solutions
-Original Message-
From: [EMAIL PROTECTED] [mailto:flashcoders-
[EMAIL PROTECTED] On Behalf Of Lewis, Chuck
Sent: Monday, June 26, 2006 11:38 AM
To: Flashcoders mailing list
Subject: RE: [Flashcoders] li color
I use css in my Flash and changed the color of both UL and LI
colors
and it worked fine.
li {color: #9A9CA6;font-weight: 900;font-family: Arial;font-size:
16px;display: block}
-- Chuck
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
RE: [Flashcoders] FileReference and actionscript 2.0
Pretty simple:
import flash.net.FileReference;
class package.FileReferenceListener extends Object {
public function FileReferenceListener () {
super();
}
private function onCancel(file:FileReference):Void {
trace(onCancel: + file.name);
}
private function onOpen(file:FileReference):Void {
trace(onOpen: + file.name);
}
private function onProgress(file:FileReference,
bytesLoaded:Number, bytesTotal:Number):Void {
trace(onProgess: + file.name + : + bytesLoaded + / +
bytesTotal);
}
}
Then, elsewhere, you can do something like this:
import flash.net.FileReference;
import package.FileReferenceListener;
// ...
var file:FileReference = new FileReference();
var listener:FileReferenceListener = new FileReferenceListener();
file.addListener(listener);
// Do stuff with file.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of human
ghaderyan
Sent: Sunday, June 25, 2006 7:34 AM
To: Flashcoders mailing list
Subject: Re: [Flashcoders] FileReference and actionscript 2.0
Hi dear Hank
I think after a successfull upload and inserting in db, I can set the
record ID (or any thing else) in User Session in server and after
successful upload( returning true to flash ) call a simple remoting
method that invoke id from session and return it to flash.
After all I think I don't undrestand some of key features of AS 2.0 ::
listener.onCancel = function(file:FileReference):Void {
trace(onCancel);
}
listener.onOpen = function(file:FileReference):Void {
trace(onOpen: + file.name);
}
listener.onProgress = function(file:FileReference, bytesLoaded:Number,
bytesTotal:Number):Void {
trace(onProgress with bytesLoaded: + bytesLoaded + bytesTotal:
+ bytesTotal);
}
I don't know where can I put event methods like this in my AS 2.0 class.
What did I misundrestand??
All the samples are in AS1 and I don't know what to do for my events :(
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
Re: [Flashcoders] FileReference and actionscript 2.0
one way of doing it:
class MyClass {
var file:FileReference;
function doit() {
file = new FileReference();
file.addListener(this);
file.browse();
}
function onCancel() {
trace(user canceled);
}
function onBlah()
}
hope this helps,
-David R
On 6/25/06, human ghaderyan [EMAIL PROTECTED] wrote:
Hi dear Hank
I think after a successfull upload and inserting in db, I can set the record ID
(or any thing else) in User Session in server and after successful upload(
returning true to flash ) call a simple remoting method that invoke id from
session and return it to flash.
After all I think I don't undrestand some of key features of AS 2.0 ::
listener.onCancel = function(file:FileReference):Void {
trace(onCancel);
}
listener.onOpen = function(file:FileReference):Void {
trace(onOpen: + file.name);
}
listener.onProgress = function(file:FileReference, bytesLoaded:Number,
bytesTotal:Number):Void {
trace(onProgress with bytesLoaded: + bytesLoaded + bytesTotal: +
bytesTotal);
}
I don't know where can I put event methods like this in my AS 2.0 class. What
did I misundrestand??
All the samples are in AS1 and I don't know what to do for my events :(
- Original Message
From: hank williams [EMAIL PROTECTED]
To: Flashcoders mailing list flashcoders@chattyfig.figleaf.com
Sent: Sunday, June 25, 2006 5:20:43 PM
Subject: Re: [Flashcoders] FileReference and actionscript 2.0
I am curious what those tricks are.
What I do is to ask the server for an upload code number before I upload
This upload code is associated with the given user and whatever the user is
trying to do. This is application specific. This creates a record in the
database, so that when the file is uploaded the server knows what it is.
Then I send the parameter as part of the upload URL. Additionally, I make
the upload codes time out. So if a code isnt used within a few minutes it is
no longer usable.
Regards
Hank
On 6/25/06, human ghaderyan [EMAIL PROTECTED] wrote:
Thanx david. I think I can do some tricks to return value after completion
of download.
- Original Message
From: David Rorex [EMAIL PROTECTED]
To: Flashcoders mailing list flashcoders@chattyfig.figleaf.com
Sent: Sunday, June 25, 2006 9:21:58 AM
Subject: Re: [Flashcoders] FileReference and actionscript 2.0
On 6/23/06, human ghaderyan [EMAIL PROTECTED] wrote:
Hi list
I try to use FileReference class in a actionscript 2.0 project. the
browse and upload methods work fine but it seems that this class
designed
for AS 1.0 (???). I can't find any AS 2.0 sample and don't know what to
do
for catching events . I think this class has bad architecture. for
example I
need to put the uploaded file in database and return its ID to client.
The class works fine in AS2, you catch the events pretty much the exact
same
was as other built in classes (like MovieClip, XML, etc)
FileReference do the transfer by a POST but it seems that there is no way
to
catch a response from server for this POST Action.
Correct, as far as I know, they did not give a way to recieve any data
returned from the server. All you can know is that the action completed.
any body has some experience to do the uplad with flash remoting?
You can't upload files from the user's local drive using flash remoting.
-David R
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
Re: [Flashcoders] What AS edting features do you want in BBEdit?
I use PrimalScript on windows, and the code completion (aka Intellisense) is very nice. It works on all the built in classes, as well as all my own classes. It's not perfect (occasionally it only finds function names, but not paramaters), but it speeds up my coding a lot -- i don't have to look into the reference to find the exact name of the method I want. -David R On 6/26/06, Steven Loe [EMAIL PROTECTED] wrote: Hello all, After pleading with BareBones software a couple of times to offer native support for ActionScript, I finally seem to have their attention... They've asked me what specific AS editing features (besides code coloring) would be most valuable. I'm just one guy, and my requests would be integration with MTASC and Command-Enter to test movie. What features do the rest of the Mac ActionScripters want to see in BBEdit? I'll compile respones into a feature request list and send it it Bare Bones. thanks very much! -Steven __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] What AS edting features do you want in BBEdit?
Can the responses be sent to Stephen via his email address to keep the List slim n'trim ? Pls thks. I use PrimalScript on windows, and the code completion (aka Intellisense) is very nice. It works on all the built in classes, as well as all my own classes. It's not perfect (occasionally it only finds function names, but not paramaters), but it speeds up my coding a lot -- i don't have to look into the reference to find the exact name of the method I want. -David R On 6/26/06, Steven Loe [EMAIL PROTECTED] wrote: Hello all, After pleading with BareBones software a couple of times to offer native support for ActionScript, I finally seem to have their attention... They've asked me what specific AS editing features (besides code coloring) would be most valuable. I'm just one guy, and my requests would be integration with MTASC and Command-Enter to test movie. What features do the rest of the Mac ActionScripters want to see in BBEdit? I'll compile respones into a feature request list and send it it Bare Bones. thanks very much! -Steven __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] What AS edting features do you want in BBEdit?
..and if you could limit your response to a list of features you'd like to see in BBEdit for ActionScript editing (rather than discussion about other text editors) that would be great. Thx. Steven Loe --- [EMAIL PROTECTED] wrote: Can the responses be sent to Stephen via his email address to keep the List slim n'trim ? Pls thks. After pleading with BareBones software a couple of times to offer native support for ActionScript, I finally seem to have their attention... They've asked me what specific AS editing features (besides code coloring) would be most valuable. I'm just one guy, and my requests would be integration with MTASC and Command-Enter to test movie. What features do the rest of the Mac ActionScripters want to see in BBEdit? I'll compile respones into a feature request list and send it it Bare Bones. thanks very much! -Steven __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Graphics/Flash Animator Openings - Marietta, GA
We are currently looking for 3 or more qualified individuals for the position of Graphics/Flash Animator. More information is provided in the link below: http://www.ilearn.com/jobs Joey Rivera Flash Developer iLearn, Inc. ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Resize External .Swf File Based on Stage?
I'm having an issue resizing externally loaded .swf files. It's no problem if the content of the external .swf is contained within the movie's stage, but if not, how can I resize it based on it's width or height? Especially if the content is animated and the height/width is constantly changing? It doesn't seem like you can get the stage size of an externally loaded .swf. Thanks, Brandon ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] What does this code mean and What are Inspectables ...
On 4-jun-2006, at 5:14, Stephen Ford wrote: Hi all, FIRSTLY (1) I have found, in numerous AS2.0 code examples, code that looks like the following ... [Event(click)] Shortly speaking they are square plugs for round gaps in ActionScript (lack of metaprogramming and introspection, among other things) -- Julian 'Julik' Tarkhanov please send all personal mail to me at julik.nl ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Resize External .Swf File Based on Stage?
There is no way to know the stage size of an imported SWF. The loading parent only knows the size of the loaded SWF from the elements present on frame 1. You could however place an invisible element the size of it's stage inside the loaded SWF... (I've used that trick before!) Or use variables with the height and width on the first frame of your loaded SWF A+ Brandon Krakowsky/MTC a écrit : I'm having an issue resizing externally loaded .swf files. It's no problem if the content of the external .swf is contained within the movie's stage, but if not, how can I resize it based on it's width or height? Especially if the content is animated and the height/width is constantly changing? It doesn't seem like you can get the stage size of an externally loaded .swf. Thanks, Brandon ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- === Éric Thibault Programmeur analyste Réseau de valorisation de l'enseignement Université Laval, pavillon Félix-Antoine Savard Québec, Canada Tel.: 656-2131 poste 18015 Courriel : [EMAIL PROTECTED] === Avis relatif à la confidentialité / Notice of Confidentiality / Advertencia de confidencialidad http://www.rec.ulaval.ca/lce/securite/confidentialite.htm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Re: loadvars vs xml onData
Hi, I actually don´t know, but probably make more sense if the onLoad method would be faster because it should be easier to parse the LoadVars source rather than the xml one. But no idea why the onData method is faster... Sorry for not helping too much :S Bye On 6/26/06, Andreas Rønning [EMAIL PROTECTED] wrote: Anyone know why loadvars.onData gets results quicker than xml.onData? Did a bunch of average tests and xml is noticably slower (5-10 ms) - Andreas ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- Juan Delgado - Zárate http://www.zarate.tv ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Re: loadvars vs xml onData
Its called first and is faster because its invoked as soon as you have data, and before you actually parse or process the data. onData is always gonna be called first. onLoad is called when the call has totally completed, there fore at the end of the process, whereas onData is at the beginning. Hi, I actually don´t know, but probably make more sense if the onLoad method would be faster because it should be easier to parse the LoadVars source rather than the xml one. But no idea why the onData method is faster... Sorry for not helping too much :S Bye On 6/26/06, Andreas Rønning [EMAIL PROTECTED] wrote: Anyone know why loadvars.onData gets results quicker than xml.onData? Did a bunch of average tests and xml is noticably slower (5-10 ms) - Andreas ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- Juan Delgado - Zárate http://www.zarate.tv ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] creating SWF or VIDEO on the fly ?
hi All, I´d like to discuss some ideas about if is possible to produce an app using only AS2 that would get an JPG file, record some sound and them export them as SWF ou FLV, to import further im some other app. would it be possible ? -- João Carlos ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Re: loadvars vs xml onData
Hi Stacey, Check out the question: Anyone know why loadvars.onData gets results quicker than xml.onData He's comparing loadvars.onData with xml.onData - apples and apples, not loadvars.onData with xml.onLoad. It's a good question! I'd like to know Jim Kremens ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Resize External .Swf File Based on Stage?
Thanks. Yeah, I figured that's what I'd have to do. Thanks, Brandon Éric Thibault [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 06/26/2006 03:51 PM Please respond to Flashcoders mailing list flashcoders@chattyfig.figleaf.com To Flashcoders mailing list flashcoders@chattyfig.figleaf.com cc Subject Re: [Flashcoders] Resize External .Swf File Based on Stage? There is no way to know the stage size of an imported SWF. The loading parent only knows the size of the loaded SWF from the elements present on frame 1. You could however place an invisible element the size of it's stage inside the loaded SWF... (I've used that trick before!) Or use variables with the height and width on the first frame of your loaded SWF A+ Brandon Krakowsky/MTC a écrit : I'm having an issue resizing externally loaded .swf files. It's no problem if the content of the external .swf is contained within the movie's stage, but if not, how can I resize it based on it's width or height? Especially if the content is animated and the height/width is constantly changing? It doesn't seem like you can get the stage size of an externally loaded .swf. Thanks, Brandon ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- === Éric Thibault Programmeur analyste Réseau de valorisation de l'enseignement Université Laval, pavillon Félix-Antoine Savard Québec, Canada Tel.: 656-2131 poste 18015 Courriel : [EMAIL PROTECTED] === Avis relatif à la confidentialité / Notice of Confidentiality / Advertencia de confidencialidad http://www.rec.ulaval.ca/lce/securite/confidentialite.htm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Re: loadvars vs xml onData
Caught on skimming Intersting question now, I'm wondering which class has a higher overhead file size wise... Hi Stacey, Check out the question: Anyone know why loadvars.onData gets results quicker than xml.onData He's comparing loadvars.onData with xml.onData - apples and apples, not loadvars.onData with xml.onLoad. It's a good question! I'd like to know Jim Kremens ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] RE: optimizing an animation?
You can also replace all your tweens with keyframes Just F6 all the way through your tween frames then select all the new keyframes and rightclick and choose remove tween, make sure you get em all This will in effect replace all tweens with keyframes Tweens have to be calculated by the cpu whereas keyframes don't But the cpu will still have to calculate vectors, just not tweens of vectors So this might help some too -- Flash4Hire http://www.flash4hire.com Steve Killingbeck, MMCP, ACE Owner Technical Director Certified Flash Developer Designer [EMAIL PROTECTED] 612.709.6515 -- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 26, 2006 11:01 AM To: flashcoders@chattyfig.figleaf.com Subject: Flashcoders Digest, Vol 17, Issue 85 Send Flashcoders mailing list submissions to flashcoders@chattyfig.figleaf.com To subscribe or unsubscribe via the World Wide Web, visit http://chattyfig.figleaf.com/mailman/listinfo/flashcoders or, via email, send a message with subject or body 'help' to [EMAIL PROTECTED] You can reach the person managing the list at [EMAIL PROTECTED] When replying, please edit your Subject line so it is more specific than Re: Contents of Flashcoders digest... Today's Topics: 1. Re: checking in (Graham Pearson) 2. optimizing an animation? (michal jaworski) 3. li color (Merrill, Jason) 4. Transparent background in projector (Screenweaver) (franto) 5. Re: Transparent background in projector (Screenweaver) (Ian Thomas) 6. Re: Transparent background in projector (Screenweaver) (franto) 7. Re: li color (Adrian Park) 8. Re: Transparent background in projector (Screenweaver) (Ian Thomas) 9. Text arching (Umesh Patel) 10. RE: li color (Merrill, Jason) 11. RE: li color (Lee McColl-Sylvester) 12. Re: Transparent background in projector (Screenweaver) (franto) 13. RE: li color (Lee McColl-Sylvester) 14. RE: li color (Lewis, Chuck) 15. RE: li color (Lee McColl-Sylvester) 16. RE: li color (Lewis, Chuck) 17. Re: li color (Michael Stuhr) 18. Re: Text arching (Weyert de Boer) 19. RE: li color (Merrill, Jason) 20. RE: li color (Lee McColl-Sylvester) -- Message: 1 Date: Mon, 26 Jun 2006 10:05:33 -0400 From: Graham Pearson [EMAIL PROTECTED] Subject: [Flashcoders] Re: checking in To: Flashcoders mailing list flashcoders@chattyfig.figleaf.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=ISO-8859-1 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I have to solve one thing yet and test this new software at one of our schools before we move to this new version number of DCG-150. When I have this ready we will be ready for you to image the drives when they are shipped. I have done alot of work to make this easy for us. Jennie Forman wrote: Hi Graham, It wouldn't be hard at all to change the product name! I will just get some new model # badges ordered for you. So are you completely done with the DCG-100 stuff? If so, I'll have my branding manager obsolete the model # badges so that there is no confusion. Jennie Forman MBX Account Manager 888.440.1414 Toll Free 877-520-4629 Direct Line 847-852-9803 Cell Phone [EMAIL PROTECTED] AIM: mbxjennie Corporate Headquarters 1101 Brown Street Wauconda, IL 60084 -Original Message- From: Graham Pearson [mailto:[EMAIL PROTECTED] Sent: Monday, June 26, 2006 6:30 AM To: Jennie Forman Subject: Re: checking in -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Just a quick note on how hard would it be to change the DCG-100 to DCG-150. I am working on a new version of this product and getting all of my ducks in a row before I bring out a new product. Everything else with the hardware will stay the same. Jennie Forman wrote: Hi Graham, Thank you for the feedback on the RMA issues. I am hoping that soon we can get back to imaging your hard drives for you here at MBX. There are a lot of hardware problems that can be caught by simply installing an OS. Without an OS, our testing capabilities are somewhat limited. Perhaps as an interim solution we could just do a base install of your OS to run the tests, and wipe it clean before we ship it out. Any thoughts on that? What version of Linux are you currently using? Jennie Forman MBX Account M - -- Graham Pearson, System Administrator / Application Developer Northern Indiana Educational Services Center Mishawaka, IN 46544 Voice (866) 254-5322 or (574) 254-5210 / Fax (574) 254-0148 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) Comment: GnuPT 2.6.2.1 by EQUIPMENTE.DE Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEn+mrrwdok4nP6d0RAn8NAJ0QAeBOn023vwFE6QgJAPtF4AgwhQCeIVD1
[Flashcoders] Loading external SWFs with a different frame rate
Does anyone know how to load an external SWF and have it play back at its native frame rate if the movie that its being loaded into has a different frame rate? For example, I have a movie that is set to 30fps (swf1) and I want to load in another movie that's 12fps (swf2). I want swf2 to play back at its intended speed. Any suggestions? Thanks, Derek ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Loading external SWFs with a different frame rate
whatver you load takes its parents frame rate - so I'm gonna say - ain't gonna happen. Does anyone know how to load an external SWF and have it play back at its native frame rate if the movie that its being loaded into has a different frame rate? For example, I have a movie that is set to 30fps (swf1) and I want to load in another movie that's 12fps (swf2). I want swf2 to play back at its intended speed. Any suggestions? Thanks, Derek ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Class Problem with Flash Develop Editor
Hi everyone:
I have a problem with this class, so I hope you can Help me with it.
This is:
In Devuelve() method, on the _root.ventana_mc.onEnterFrame event, when I
Say this.* it refeers to the Instance that Event cames from but instead
it assumes , this refeers to MovieClip instead of my class Object.
Any help could be good.
Thanks
//--
---
class AA
{
var a:Number = new Number;
function AA(numero:Number)
{
a = numero;
}
function Devuelve(){
_root.createEmptyMovieClip(ventana_mc,
_root.getNextHighestDepth());
_root.ventana_mc.beginFill(0x33ccff);
_root.ventana_mc.moveTo(0, 0);
_root.ventana_mc.lineTo(100, 0);
_root.ventana_mc.lineTo(100, 100);
_root.ventana_mc.lineTo(0, 100);
_root.ventana_mc.lineTo(0, 0);
_root.ventana_mc.endFill();
_root.ventana_mc.createTextField(miCaja, 1,
_root.ventana_mc._x, _root.ventana_mc._y , 0, 0);
_root.ventana_mc.miCaja.selectable = true;
_root.ventana_mc.miCaja.border = true;
_root.ventana_mc.miCaja.autoSize = true;
_root.ventana_mc.miCaja.text = String(a++) ;
_root.ventana_mc.onEnterFrame = function() {
this.Devuelve();
trace(String(this.a));
}
}
}
//--
---
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
RE: [Flashcoders] Re: loadvars vs xml onData
That is really weird. One question--are the files being loaded the same size? (Or, better yet, the same file.) -- Mike Keesey -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Kremens Sent: Monday, June 26, 2006 1:17 PM To: Flashcoders mailing list Subject: Re: [Flashcoders] Re: loadvars vs xml onData Hi Stacey, Check out the question: Anyone know why loadvars.onData gets results quicker than xml.onData He's comparing loadvars.onData with xml.onData - apples and apples, not loadvars.onData with xml.onLoad. It's a good question! I'd like to know Jim Kremens ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Fjax... does this seem ridiculous to anyone else?
It can do limited cross domain xml loading (obeying crossdomain.xml policy files of course), unlike the JavaScript XmlHttpRequest object. So if nothing else, it could work as a client side proxy, for those that can't run server side proxies, or just want less traffic to run through their server. Kevin N. ryanm wrote: http://www.fjax.net/ ryanm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] Loading external SWFs with a different frame rate
If the loaded SWF (12fps) is straight linear, you could control its playback using setInterval, at advancing the frame every 83 milliseconds (1000/12). That is one option (maybe your only) -Geoff -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 26, 2006 4:07 PM To: flashcoders@chattyfig.figleaf.com Subject: Re: [Flashcoders] Loading external SWFs with a different frame rate whatver you load takes its parents frame rate - so I'm gonna say - ain't gonna happen. Does anyone know how to load an external SWF and have it play back at its native frame rate if the movie that its being loaded into has a different frame rate? For example, I have a movie that is set to 30fps (swf1) and I want to load in another movie that's 12fps (swf2). I want swf2 to play back at its intended speed. Any suggestions? Thanks, Derek ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
[Flashcoders] Oregano forum/mailing list/etc
I posted this last week and got exactly 0 responses. Anyone? Where can I find an Oregano forum or mailing list? I'm getting some errors and I need an archive to search. ;-) ryanm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] Oregano forum/mailing list/etc
I don't think its very active but here you go. http://www.v-i-a.net/forum/ Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ryanm Sent: 26 June 2006 22:35 To: Flashcoders mailing list Subject: [Flashcoders] Oregano forum/mailing list/etc I posted this last week and got exactly 0 responses. Anyone? Where can I find an Oregano forum or mailing list? I'm getting some errors and I need an archive to search. ;-) ryanm ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Re: loadvars vs xml onData
The tests i ran were something like this: create an xml object add a callback for its onData 30 times, get the same file from the server and get an average of the time between the load() call and the onData invocation. repeat for loadvars compare results. I've done tests against a server that might as well be called local, but on average loadvars gave me around 20 ms, while xml gave me between 25 and 30. I know loadvars extends object, wheras xml extends xmlNode which again extends object, so i don't know.. I always thought all classes that load content and have an onData event inherit the same functionality but override on the onLoad... - Andreas Mike wrote: That is really weird. One question--are the files being loaded the same size? (Or, better yet, the same file.) -- Mike Keesey -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Kremens Sent: Monday, June 26, 2006 1:17 PM To: Flashcoders mailing list Subject: Re: [Flashcoders] Re: loadvars vs xml onData Hi Stacey, Check out the question: Anyone know why loadvars.onData gets results quicker than xml.onData He's comparing loadvars.onData with xml.onData - apples and apples, not loadvars.onData with xml.onLoad. It's a good question! I'd like to know Jim Kremens ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Loading external SWFs with a different frame rate
I don't think it's possible to run the loaded swf at a different frame rate from the container, but I have read (and I even got it to work once) that you can force the parent clip to take the frame rate of the loaded swf, by embedding a streaming (I think) sound file (even if it's silence) into the swf that will be loaded. I'm pretty sure that if you can get this to work, it will slow down the parent swf's frame rate though. Kevin N. Geoffrey Holland wrote: If the loaded SWF (12fps) is straight linear, you could control its playback using setInterval, at advancing the frame every 83 milliseconds (1000/12). That is one option (maybe your only) -Geoff -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 26, 2006 4:07 PM To: flashcoders@chattyfig.figleaf.com Subject: Re: [Flashcoders] Loading external SWFs with a different frame rate whatver you load takes its parents frame rate - so I'm gonna say - ain't gonna happen. Does anyone know how to load an external SWF and have it play back at its native frame rate if the movie that its being loaded into has a different frame rate? For example, I have a movie that is set to 30fps (swf1) and I want to load in another movie that's 12fps (swf2). I want swf2 to play back at its intended speed. Any suggestions? Thanks, Derek ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
RE: [Flashcoders] Re: loadvars vs xml onData
You're loading in a non-cached version each time right?
var myXml = new XML();
for (var a = 0; a 30; a++) {
myXml.load(path + ?x= + a);
}
BLITZ | Steven Sacks - 310-551-0200 x209
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
[Flashcoders] Panning and Sliding, using Tweens possible?
I am curious if it's possible to use the Tween or TweenExtended class to make pan/slide animation. I mean something like you move a picture from the left bottom corner to the right top corner within the dimensions of the container movieclip. Yours, Weyert de Boer ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Flash for forums
I'll have to take your word for it, I never use the things. I've decided to go with an existing forum, p2pbb or vbulletin, customized with a flash header. Thanks On 6/26/06, Mick G [EMAIL PROTECTED] wrote: The highly important and common feature for Forums is the ability to paste HTML, perform clean and efficient searches, insert images from other sites/URLs, embed flash animations, right-click to open links posted links in new tabs/windows, paste code, harcore forum users even cherish their custom footers. Most of these functions wouldn't be as effective in a flash front-end. On 6/25/06, Count Schemula [EMAIL PROTECTED] wrote: I'm on a few vBulletin powered forums and they work very well. Bulletin boards are far superior to e-mail lists in almost everyway. I've been on e-mail lists since before there was a web, and, really, there is no comparison to how much more useful 100,000 threaded conversations are in a bulletin board compared to an e-mail list. On 6/24/06, Josh Santangelo [EMAIL PROTECTED] wrote: vBulletin's current version has many AJAXy features which enable interactions similar to what you describe. It's not free, but it's not expensive either. http://vbulletin.com/ ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- Weldon MacDonald ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Flash for forums
I vote vBulletin. It's under active development and gets better all the time. It's already very very smooth and quite powerful. Worth the $100 or whatever they ask for it. phpbb is a great open source effort, but just isn't as nice or powerful overall overall. On 6/26/06, Weldon MacDonald [EMAIL PROTECTED] wrote: I'll have to take your word for it, I never use the things. I've decided to go with an existing forum, p2pbb or vbulletin, customized with a flash header. Thanks On 6/26/06, Mick G [EMAIL PROTECTED] wrote: The highly important and common feature for Forums is the ability to paste HTML, perform clean and efficient searches, insert images from other sites/URLs, embed flash animations, right-click to open links posted links in new tabs/windows, paste code, harcore forum users even cherish their custom footers. Most of these functions wouldn't be as effective in a flash front-end. On 6/25/06, Count Schemula [EMAIL PROTECTED] wrote: I'm on a few vBulletin powered forums and they work very well. Bulletin boards are far superior to e-mail lists in almost everyway. I've been on e-mail lists since before there was a web, and, really, there is no comparison to how much more useful 100,000 threaded conversations are in a bulletin board compared to an e-mail list. On 6/24/06, Josh Santangelo [EMAIL PROTECTED] wrote: vBulletin's current version has many AJAXy features which enable interactions similar to what you describe. It's not free, but it's not expensive either. http://vbulletin.com/ ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com -- Weldon MacDonald ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Panning and Sliding, using Tweens possible?
definitely possible. i'm pretty new to actionscript so don't laugh,
but this is what i've been using recently.
mcButton.onRelease = function(){
new mx.transitions.Tween(mcTarget, _x,
mx.transitions.easing.Strong.easeOut, 0, 600, 2, true);
new mx.transitions.Tween(mcTarget, _y,
mx.transitions.easing.Strong.easeOut, 600, 0, 2, true);
}
(mcTarget, _x, mx.transitions.easing.Strong.easeOut, 0, 600, 2, true)
target, parameter, easing type, starting coordinate, ending
coordinate, seconds or frames, true for use seconds and false for use
frames
On Jun 26, 2006, at 5:30 PM, Weyert de Boer wrote:
I am curious if it's possible to use the Tween or TweenExtended
class to make pan/slide animation. I mean something like you move a
picture from the left bottom corner to the right top corner within
the dimensions of the container movieclip.
Yours,
Weyert de Boer
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
___
Flashcoders@chattyfig.figleaf.com
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
Re: [Flashcoders] Text arching
I'd like to recommend Text2Curve component for this: http://gousable.com/flash/text2curve.html It has a lot of advantages over TextOnCircle Weyert mentioned: - can place text along ellipse or sine, not only circle - more methods to manipulate this text - can be used in Flash IDE, even rotated/distorted there. - some more :-) Recently version 1.6 was released with more useful features. BTW, reminding some recent threads in this list: - it manages to evenly distribute objects (letters) along the ellipse - starting point can be moved (along the ellipse) at any distance. == Quotation: == === New in version 1.6 (see samples 6 and 7): - Center Text parameter allows text to be centered by the top or bottom point of the curve (round or ellipse). - Letter Spacing parameter adds some more space between letters (in pixels). - Start Point parameter allows you to change the distance along the curve (in pixels) from 0 point (marked with cross) to the first letter. Some kind of indent. - Some properties added to access via Actionscript - Updated help system === Description: Text2Curve Flash component allows you to place dynamic text along one of pre-defined curves. Unlike similar tools in programs as Illustrator, CorelDRAW or Freehand, it allows doing this dynamically, e.g. as a movie is playing. Text along the curve (circle, ellipse, wave and so on) is broadly used by designers to create artistic effects. Can be used as a component in Flash MX 2004 or later. Resulting movie require Flash Player 7 or later. The package contains complete Help system with API documentation and samples. === Features: - Place dynamic text along one of pre-defined curves. Broad range of parameters can approximate almost any curve you need. - This text remains dynamic and can be changed at runtime. - Use your favorite font (just embed it). - Interactive Live Preview. Edit Text2Curve component in Flash IDE like any other movie clip. No programming needed. - Using class constructor, you can create Text2Curve objects from scratch at runtime with Actionscript. - Scale, rotate and distort text along the curve in Flash IDE or at runtime via Actionscript. - Animate text along the curve either with timeline-based motioin tween or Actionscript. - Help system with illustrations and API documentation. You can also dynamically: - Change text to be shown; - Change text or curve's parameters and then update the view using redraw() method. -- Best regards, GregoryN http://GOusable.com Flash components development. Usability services. -- Umesh Patel wrote: I have following question. I saw nike's unifrm builder, Nike Uniform Builder(http://www.niketeam.com/v2/new/Sport...T=BBMCAT=UNI), they built uniform generator using Flash, the only thing wondering me is, how did they manage to arch the text, if anybody has any clue then I would be very happy to see little bit of action scripting. I want different arching with click of a button or something like that, I am attaching a sample of arching that I am looking for! If anybody figures it out. thanks, Umesh Patel - Weyert de Boer wrote: I have asked a friend of mine, and he came up with this code and example: http://richardleggett.co.uk/downloads/flash/StringWidth/ ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
Re: [Flashcoders] Text arching
From the online samples, I don't see any demonstration of the claimed ability to distort the text, just to place the letters along different curves. Am I missing something? I hope so, since I've been looking for a way to do text distortions (such as making text fit a flat-topped arch). - Marc Hoffman At 09:23 PM 6/26/2006, you wrote: I'd like to recommend Text2Curve component for this: http://gousable.com/flash/text2curve.html It has a lot of advantages over TextOnCircle Weyert mentioned: - can place text along ellipse or sine, not only circle - more methods to manipulate this text - can be used in Flash IDE, even rotated/distorted there. - some more :-) ___ Flashcoders@chattyfig.figleaf.com To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
