Use AIR and u can do that
Eric
On Apr 17, 2014, at 5:21 PM, John R. Sweeney Jr. jr.swee...@comcast.net
wrote:
Hi all,
I need to center a Flash projector on both MAC and PC. Not center the stage,
but literally, when you double click the app or exe, it opens in the center
of the
I'm looking for something to attempt to remove noise (or hum/hiss) from a
playing audio file in real-time.
Thanks for any pointers.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
Imagineric http://imagineric.ericd.net
Has anyone been able to generate a more current AS3 file as a projector?
I'm not talking about AIR or captive runtime, talking about the
old-fashioned projector for Mac? It's just gone from the IDE and the later
players have this greyed out.
Google Voice: (508) 656-0622
Twitter:
clip.clip.addEventListener( ...
Eric
On May 21, 2013, at 5:17 PM, [ p e r c e p t i c o n ]
percepti...@gmail.com wrote:
Anyone know how to get the mouse over of a nested clip
___
Flashcoders mailing list
Flashcoders@chattyfig.figleaf.com
I've cracked Flash open again for some simulations and I am looking for
some code that will allow me to provide a visualizer per audio file as it
plays. computeSpectrum is out obviously.
Anyone have any code that can provide super-simple (say scaling a clip)
based on extracted values while the
.cjb.netwrote:
Eric E. Dolecki skriver:
I have some hardware that sends serial data over USB. Any good proxy app
to
use with Sockets to read that data in an AS3 app?
Have you tried an AIR native extension?
___
Flashcoders mailing list
I have some hardware that sends serial data over USB. Any good proxy app to
use with Sockets to read that data in an AS3 app?
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
Hey all -
I am looking for some starter code. Imagine stacks of sprites vertically.
You select a number and the camera moves up to that stack. This is 3d.
Does anyone have any quick code to get me rolling? I haven't done much 3d
in Flash and I'm not sure where to start quickly.
Thanks!
http://www.greensock.com/as/docs/tween/com/greensock/TweenMax.html
On Mon, Nov 7, 2011 at 12:25 PM, Paul Andrews p...@ipauland.com wrote:
I'm just thinking about the best way to do this (OK, the laziest way to do
this).
I have a MC at point A and want to tween it to point B. OK, no
I am looking for the best AS3 face detection/recognition available source
currently around. Anyone have pointers? Googling shows a lot of older stuff.
Thanks!
Eric
___
Flashcoders mailing list
Flashcoders@chattyfig.figleaf.com
Apologies but I haven't done any Flex in a few years and I am getting back
into it.
I created a FLA and then created some visual assets in the Library, with
Linkage names. I then published a SWC of these.
In my Flex app project I linked the SWC with my project. Then I try to call
the stuff up
*implicit coercion of a value of type mx.core.IVisualElement to unrelated
type Sphere.*
:/
2011/9/21 Cédric Muller flashco...@benga.li
what if you do 'var s:Sphere = new Sphere() as IVisualElement' ?`
Apologies but I haven't done any Flex in a few years and I am getting back
into it.
I
: eric_dolecki
http://blog.ericd.net
On Wed, Sep 21, 2011 at 10:51 AM, Eric E. Dolecki edole...@gmail.comwrote:
*implicit coercion of a value of type mx.core.IVisualElement to unrelated
type Sphere.*
:/
2011/9/21 Cédric Muller flashco...@benga.li
what if you do 'var s:Sphere = new Sphere
your Sphere object via an addChild(). You would do
an addElement() on your wrapper.
jord
Original Message
Subject: Re: [Flashcoders] Question about SWC elements for use in Flex
From: Eric E. Dolecki edole...@gmail.com
Date: Wed, September 21, 2011 11:04 am
To: Flash Coders
Is there one out there or one under construction?
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
___
Flashcoders mailing list
Flashcoders@chattyfig.figleaf.com
Beyond just the search but playback as well. The search is only mildly
interesting.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Thu, Aug 11, 2011 at 10:34 AM, Nathan Mynarcik nat...@mynarcik.comwrote:
Are
Sure that would be cool :) Thanks.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Thu, Aug 11, 2011 at 3:48 PM, Sidney de Koning | Funky Monkey Studio
sid...@funky-monkey.nl wrote:
Hi Eric,
I've had
I am wondering if anyone has seen source or implementation of a photo viewer
like the one on Apple TV (origami)?
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
___
I guess it depends if it's Paris or just Europe in general.
On Fri, Jul 22, 2011 at 2:06 PM, Mendelsohn, Michael
michael.mendels...@fmglobal.com wrote:
Hi list...
The second line returns an XMLList only if the first line (bug) isn't
commented out. If the first line is commented out, the
I think I know what you want. Have your app calculate how high it
needs to be, then call out using javascript to a method which changes
the dimensions of a div, where your SWF embed is made at 100%. It can
keep calling that method. Just make sure your SWF has noScale, etc.
set within it. I've done
-
From: flashcoders-boun...@chattyfig.figleaf.com
[mailto:flashcoders-boun...@chattyfig.figleaf.com] On Behalf Of Eric E.
Dolecki
Sent: donderdag 30 juni 2011 22:32
To: Flash Coders List
Subject: Re: [Flashcoders] scrolling webpage with flash
I think I know what you want. Have your app
://www.flashandmath.com/intermediate/gummy/
hope this helps
a
On 16 June 2011 20:48, Eric E. Dolecki edole...@gmail.com wrote:
Greetings all,
I made a quick post about something I'd like to solve and someone out
there
might be able to help me.
http://imagineric.ericd.net/**2011/06/16
If you're wanting to turn the CDATA into XML, I did a quick search for you
which resulted in this link which might be handy...
http://www.actionscript.org/forums/showthread.php3?t=196374
The top of the thread may be good for you too.
Google Voice: (508) 656-0622
Twitter: eric_dolecki
the incubator build), I'd love to know why. :-)
Kevin N.
On 6/14/11 5:22 PM, Eric E. Dolecki wrote:
that would be very nice of you - for me and those lurking too.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
Greetings all,
I made a quick post about something I'd like to solve and someone out there
might be able to help me.
http://imagineric.ericd.net/2011/06/16/question-bitmap-distorting-the-bottom-half-of-the-stage/
Here is a near copy and paste of the post describing the crux of what I am
the explode/implode.
Kevin N.
On 6/13/11 9:26 AM, Eric E. Dolecki wrote:
Hey all - I am looking for a class that basically explodes a bitmap (each
pixel) and then reassembles it at another x,y location. I've been googling
but have come up empty so far. Any ideas?
Thanks,
Eric
to zip up the source and post it
somewhere.
Quick note on the video example - it's sloow in content debugger
builds. I don't know why.
Kevin N.
On 6/14/11 4:25 PM, Eric E. Dolecki wrote:
Thanks a lot for showing that to me - I managed to get something working
which is both quick
Hey all - I am looking for a class that basically explodes a bitmap (each
pixel) and then reassembles it at another x,y location. I've been googling
but have come up empty so far. Any ideas?
Thanks,
Eric
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN:
I don't need an animation package, a class that cuts a displayObject up,
disassembles it on a pixel-level basis, explodes it out, and then
reassembles the pixels of the displayObject in a different location. If I do
this myself it's going to take a lot of time, looking for something out
there that
I saw this AS3 and found it pretty compelling.
I am wondering if it's possible to add one more handle on the left and right
and update the recalc code to allow for corners and also points on the
sides...
http://wonderfl.net/c/sxQJ
I think I could just hack 2 more handles and add the new code
I've done this before but it's been ages.
I have a MC on the stage and would like to perform hitTestPoint on it. The
MC contains a PNG with transparency. I'd like for the transparent regions
not to figure into the hit detection. Looking at bitmapData.
Whats a good little bit of code to do that
Found this (it's awesome) - just make sure your host clip has it's origin
top left or it won't report correctly.
http://dougmccune.com/flex/hittest_example/srcview/index.html
- Eric
On Fri, Mar 11, 2011 at 10:00 AM, Eric E. Dolecki edole...@gmail.comwrote:
I've done this before but it's
Perhaps you could send the string data in some coded way that your Flash
code can decode and use properly. Nothing is going to be fool proof however.
Come up with your own little scheme... a 1 = A, 2 = B, etc. (probably want
something tougher than that though :))
How are you going to handle time
The Kinect camera is quite cool and useful for certain things. After playing
with it for a while I am wondering if the PS3 Move system may be a more
accurate and useful system for certain things. I did a quick Googling for
PS3 and AS3 hacking, but I haven't found anything of substance yet. Has
Yup - just add the SWC to your FLA or project and the classes should be
immediately available for your use.
On Tue, Feb 1, 2011 at 8:42 AM, Mendelsohn, Michael
michael.mendels...@fmglobal.com wrote:
Hi Eric...
I've been wanting to do that forever with some fonts and a movie clip that
I use
You won't see it in your Library, but it will be linked so when you compile,
it's all available to you.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Tue, Feb 1, 2011 at 9:12 AM, Mendelsohn, Michael
I think only the classes you actually implement from a SWC get compiled into
your SWF - but all would be available for use. Just link the SWC up for the
projects you'd need it.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
I have about 5 pieces of original music in the form of MP3s that I use a
ton. Normally I would import them into my Library, give them a class name
and call them up in my document class. However I'd rather be able to stuff
them into a SWC and access them. I'm googling now, but how can I do this? I
My bad - I didn't see the Export SWC in Publish Settings :)
On Tue, Jan 25, 2011 at 9:46 AM, Eric E. Dolecki edole...@gmail.com wrote:
I have about 5 pieces of original music in the form of MP3s that I use a
ton. Normally I would import them into my Library, give them a class name
and call
Look into AIR?
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Thu, Jan 20, 2011 at 5:32 PM, John R. Sweeney Jr
jr.swee...@comcast.netwrote:
Hi all,
My client wants to use a business card scanner/reader for a
Indeed it is :-)
Hello.
Hello.
Hello.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Tue, Jan 11, 2011 at 11:11 AM, Mendelsohn, Michael
michael.mendels...@fmglobal.com wrote:
Test: is the list
Keep one spot someplace where you keep all your packages (yours and 3rd
party). Then link to them there. If you want to use SVN, use that same spot.
Keeps things uncluttered. For project work where you have lesser-importance
or lesser-reusable code, slap those in your project directory to keep
Amazon.com is your friend. Reviews are helpful.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Fri, Sep 10, 2010 at 10:23 AM, Rodrigo Augusto Guerra
rodr...@alumni.org.br wrote:
thanks jason. I'll do that.
Some magic voodoo turns it all into an executable for the iPhone. No SWF.
Google Voice: (508) 656-0622
Twitter: eric_dolecki XBoxLive: edolecki PSN: eric_dolecki
http://blog.ericd.net
On Thu, Sep 9, 2010 at 9:59 AM, allandt bik-elliott (thefieldcomic.com)
alla...@gmail.com
] On Behalf Of Eric E. Dolecki [
edole...@gmail.com]
Sent: Monday, August 30, 2010 1:11 PM
To: Flash Coders List
Subject: Re: [Flashcoders] Accessing .fla var
I think you may need to reword your question with more detail. What exactly
is your setup?
Google Voice: (508) 656-0622
Twitter
I lost the thread to this, but he is adding it to the document class if I
remember correctly. I think we'd need to see a little code again J.C.
On Fri, Jul 16, 2010 at 3:07 PM, J.C. Berry jcharlesbe...@gmail.com wrote:
You are right. But do you know what it could be, Henrik? Do you need to see
I don't think this is enough code... myPopout extends Sprite or MovieClip or
something?
What if in your other class you did this:
var myPopout:myPopout = new myPopout(e.target,this.btnNum,this.cityList);
addChild(myPopout);
?
I don't think we know enough about what you are doing...
On Fri,
I am curious about the default About Box that comes up in OS X... can this
be customized in any way? Right now it's app icon, title, version
copyright information. One could always make their own native window and use
that from a control within the application, but if someone uses the
Application
if you addChild to an item already on the list, it will pop it to the top of
the list if it's not already there.
On Fri, Jul 2, 2010 at 2:59 PM, Lehr, Theodore ted_l...@federal.dell.comwrote:
It is - I just thought addChild would be for mc created in script - I can
add child with stuff already
They would be a child of the DisplayList, no? ie. stage (this) potentially.
On Wed, Jun 30, 2010 at 4:04 PM, Lehr, Theodore
ted_l...@federal.dell.comwrote:
How can I change depths of a movie - I found setChildIndex - but they are
not children of anything...
Forgive the noobness of this request... I haven't seen anything in Google
and I thought I had seen this before.
I am authoring an AIR 2 app using the Flash CS5 IDE. How can I generate
OS-level tooltips from stuff in my AIR app (so they can appear at an
OS-level outside the AIR container). I could
I am running a little AIR2 application, and I am trying to get additional
information about networks...
Channel, PHY Mode (ie. 802.11n), or Security (ie. WPA2 Personal).
I don't see these properties listed anywhere. Is there a way to get at these
properties, or is this a feature request?
Eric
Also some notion of network strength...
On Wed, Jun 23, 2010 at 1:36 PM, Eric E. Dolecki edole...@gmail.com wrote:
I am running a little AIR2 application, and I am trying to get additional
information about networks...
Channel, PHY Mode (ie. 802.11n), or Security (ie. WPA2 Personal).
I
It took 10 minutes to set up my 1st project and then was super slow allowing
text entry. Not sure why.
On Wed, Jun 9, 2010 at 1:01 PM, allandt bik-elliott (thefieldcomic.com)
alla...@gmail.com wrote:
interesting - thanks
On 9 June 2010 16:42, Piers Cowburn m...@pierscowburn.com wrote:
When in doubt, look at timing. I think Gerry is on to something :)
On Mon, Jun 7, 2010 at 10:03 AM, Gerry Beauregard
gerry.beaureg...@sonoport.com wrote:
I don't have a whole lot of experience with the Loader class, but I suspect
that rather than calling addChild() immediately after calling
One could have the parent fire an init method to a loaded SWF. Then the
loaded movie would know that the parent was present. I believe.
On Mon, Jun 7, 2010 at 10:28 AM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
When in doubt, look at timing. I think Gerry
yup
On Mon, Jun 7, 2010 at 10:47 AM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
One could have the parent fire an init method to a loaded SWF. Then the
loaded movie would know that the parent was present. I believe.
Or you could just wait for the ADDED event
run your cursor over it at any
point to get the readings? Might be a little trivial, but may yeild a
pattern that you can utilize.
JAT
Karl
Sent from losPhone
On Jun 3, 2010, at 6:18 PM, Eric E. Dolecki edole...@gmail.com
wrote:
SoundBooth
On Thu, Jun 3, 2010 at 6:39 PM
a certain amount of
time? Is AS3 fast enough to sync quick enough? I imagine it would need to
check for all vowels every frame matching values in waveforms over a certain
amount of time.
Eric
On Fri, Jun 4, 2010 at 8:56 AM, Eric E. Dolecki edole...@gmail.com wrote:
I've started implementing some code
. this
is with a known, unchanging vocal waveform. So I doubt this would be very
useful outside of this current system, which is a bummer.
I think it's time for me to retire this code and move on. Oh well...
Eric
On Fri, Jun 4, 2010 at 9:28 AM, Eric E. Dolecki edole...@gmail.com wrote:
I can get
found this in 0.25 seconds, but didn't download to check it:
http://www.lemlinh.com/flash-source-as3-space-invaders/
On Fri, Jun 4, 2010 at 11:20 PM, Michael Stocke mikesto...@hotmail.comwrote:
Good evening everyone.
I would like to make a space invaders clone using AS3. I don't have
It's using dynamic text to speech, so I wouldn't be able to use cue points
reliably.
On Thu, Jun 3, 2010 at 4:09 AM, Glen Pike g...@engineeredarts.co.uk wrote:
If your mp3's are pre-recorded rather than people recording them
dynamically, could you use cue points?
On 02/06/2010 20:57, Eric E
with high octaves.
JAT
Karl
On Jun 2, 2010, at 3:20 PM, Eric E. Dolecki wrote:
This is a software voice, so nailing down vowels should be easier. However
you mention matching recordings with the live data. What is being matched?
Some kind of pattern I suppose. What form would the pattern take
, Jun 3, 2010 at 8:23 AM, Eric E. Dolecki edole...@gmail.com wrote:
I don't think that's enough. Has anyone seen pitch detection in AS3 yet (no
microphone source)? That might be enough but I'm not sure.
On Thu, Jun 3, 2010 at 5:55 AM, Karl DeSaulniers k...@designdrumm.comwrote:
You could try
My most humble apologies go out to Henrik and anyone else who felt that I
was complaining about something. Which I wasn't.
On Thu, Jun 3, 2010 at 10:02 AM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
It's using dynamic text to speech, so I wouldn't be able to use cue
.cjb.net
Eric E. Dolecki wrote:
It's using dynamic text to speech, so I wouldn't be able to use cue
points
reliably.
Use dynamic cuepoints and stop complaining. If it can generate voice, it
can tell you what kinds of voice it put where. It is far more exact than
trying to reverse
Ya - I have the data for both things, but they extend over time and are
difficult to compare. It's the boiling down the signatures into something
simple and being able to read the playing audio looking for the match (or
near match). I thought about using bitmap data and trying to match up
:42 PM, Eric E. Dolecki wrote:
Ya - I have the data for both things, but they extend over time and are
difficult to compare. It's the boiling down the signatures into something
simple and being able to read the playing audio looking for the match (or
near match). I thought about using bitmap
SoundBooth
On Thu, Jun 3, 2010 at 6:39 PM, Karl DeSaulniers k...@designdrumm.comwrote:
Do you have SoundEdit? Or the like?
Karl
On Jun 3, 2010, at 5:09 PM, Eric E. Dolecki wrote:
I think I might make waveform bitmaps and then try and compare against the
current waveform (block EQ
Dude, whether you know it or not, you come off being pretty arrogant with
your comments. Don't worry, I won't be ending up on the dailywtf anytime
soon.
On Thu, Jun 3, 2010 at 6:36 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Before you start reinvesting the squarewheel, at least do some
I used Google and found this that seems decent enough:
http://developer.yahoo.com/flash/astra-flash/alertmanager/
I am assuming that you like the fact that the Flex background is
blurred while the alert is being displayed. Is this true? If you
rolled your own, the stage is a MovieClip, so you
I have a face that uses computeSpectrum in order to sync a mouth with
dynamic vocal-only MP3s... it works, but works much like a robot mouth. The
jaw animates by certain amounts based on volume.
I am trying to somehow get vowel approximations so that I can fire off some
events to update the mouth
understand your concept of how to do it, but I don't
have the technical expertise or foundation to implement the idea yet.
Eric
On Wed, Jun 2, 2010 at 4:13 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
I have a face that uses computeSpectrum in order to sync a mouth
Make a Flex app - Alert is for Flex. Or make your own Alert class. I'm
not sure if linking the Flex SWCs would work for an Alert or not.
On Tue, Jun 1, 2010 at 10:34 PM, Jim Andrews j...@vispo.com wrote:
Am I on the right list for a question like this?
I get an error, in Flash Builder 4, with
Like Paul said, I'm not going to read all that code - but do you have
different file permissions on the files? Are your PNGs encoded in an odd
way? Are they corrupt? Etc.
On Sat, May 29, 2010 at 9:41 AM, Paul Andrews p...@ipauland.com wrote:
On 29/05/2010 14:30, John Singleton wrote:
Hi;
I
It's better than CS4 for sure. Depends on how you like to work on whether or
not it's for you.
On Wed, May 19, 2010 at 1:44 AM, Henrik Andersson he...@henke37.cjb.netwrote:
Better than cs 4. The improved code assist is one of those features you
never knew that you where missing.
It pairs nicely with Flash CS5... do your UI stuff in the IDE and have the
project live in FB4. It's a workflow with document class that I've been
banging on for a while and I personally like it a lot. The Flex stuff is a
bonus.
Eric
On Wed, May 19, 2010 at 11:05 AM, Tom Gooding
Here you go, Keith Peters addressed this not too long ago:
http://www.bit-101.com/blog/?p=2615
On Mon, May 17, 2010 at 9:10 PM, Leandro Ferreira dur...@gmail.com wrote:
type about:plugins and disable Shockwave Flash
Leandro Ferreira
On Mon, May 17, 2010 at 21:26, Steve Mathews
ServerSocket is sweet - I just whipped up a nice AIR 2 socket server app and
then have a regular socket app talking back and forth with it. Rockin'!
Eric
On Wed, May 12, 2010 at 11:07 PM, Eric E. Dolecki edole...@gmail.comwrote:
Has anyone tried this ServerSocket yet?
On Wed, May 12, 2010
Why not post a question to the FlashDevelop forum? I've even fetched the
link for you.
http://www.flashdevelop.org/community/index.php
- Eric
On Wed, May 12, 2010 at 9:30 AM, Glen Pike g...@engineeredarts.co.ukwrote:
Hi,
I am having problems with my hardcoded XML when typing in
I would like to have two computers running two different SWFs talk to one
another over a LAN (say both plugged into the same router). Is it as simple
as this?
Computer A
---
SWF makes a socket, uses B's IP address and an open port - reads and writes
from this socket
Computer B
AIR because of the application security sandbox? Would standalone projectors
work as well?
On Wed, May 12, 2010 at 3:25 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
I would like to have two computers running two different SWFs talk to one
another over a LAN (say
, 2010 at 4:11 PM, Eric E. Dolecki edole...@gmail.com wrote:
AIR because of the application security sandbox? Would standalone
projectors work as well?
On Wed, May 12, 2010 at 3:25 PM, Henrik Andersson
he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
I would like to have two computers
Huh?
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/Socket.html
all I need is readUTFBytes and writeUTFBytes...
On Wed, May 12, 2010 at 6:31 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
AIR because of the application security sandbox
party. (I say apparently because I've just found out about the
ServerSocket class following the link that Henrik posted).
Cheers
Juan Pablo Califano
2010/5/12 Eric E. Dolecki edole...@gmail.com
Huh?
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net
I have seen developers push a PDF document into a UIWebView (super easy and
it does work), but a better way of getting PDFs to display on an
iPhone/Touch/iPad is pretty simple too in your own application (if you're up
to it).
http://www.random-ideas.net/posts/42
I thought I read something long
Wouldn't the mere fact that iTunes as a sync conduit is a pretty decent...
conduit? Makes things pretty simple and even flexible to a certain degree.
On Tue, May 11, 2010 at 11:10 AM, Dave Watts dwa...@figleaf.com wrote:
The real problem is not market share but mind share. That is, even
if
You said, Aside from the breadth of the App Store, there really isn't any
advantage that iPhone has over the Android 2.1 phones.
My point was that iTunes is a pretty compelling conduit for the iPhone. Do
Android phones have such a thing?
On Tue, May 11, 2010 at 11:33 AM, Dave Watts
Hey all,
I am trying to validate whether or not a file exists on a server. Normally
this is easy peasy.
urlLoader = new Loader();
urlLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, urlLoaded );
urlLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,
onUrlLoadError );
Oops - I used Loader instead of URLLoader - sorry for the noise ;)
On Fri, May 7, 2010 at 1:59 PM, Eric E. Dolecki edole...@gmail.com wrote:
Hey all,
I am trying to validate whether or not a file exists on a server. Normally
this is easy peasy.
urlLoader = new Loader
import flash.net.FileReference;
var s:XML = categorynode id=testHello/node/category;
var file:FileReference = new FileReference();
file.save( s, testing.xml );
On Thu, May 6, 2010 at 8:13 AM, ekameleon ekamel...@gmail.com wrote:
Hello :)
in the FP10 see the FileReference.save() method
Use PHP or something like that as middleware. However can more than one app
instance run at the same time?
On Thu, May 6, 2010 at 8:24 AM, Lehr, Theodore ted_l...@federal.dell.comwrote:
Perhaps my methodology is wrong - here is what I want to do:
Say I have 100 links... I want to track which
Quick question... my document class is in FB4 and it's linked with my FLA in
Flash CS5. Every time I save the document class, it publishes the FLA in the
IDE. Is there a way to turn that off (even temporarily)?
Eric
___
Flashcoders mailing list
Ok, I'll bite - where is that setting? Poking around in prefs right now.
On Wed, May 5, 2010 at 3:16 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki wrote:
Quick question... my document class is in FB4 and it's linked with my FLA
in
Flash CS5. Every time I save the document
Found it Under Build - sorry for the noise :)
On Wed, May 5, 2010 at 3:35 PM, Eric E. Dolecki edole...@gmail.com wrote:
Ok, I'll bite - where is that setting? Poking around in prefs right now.
On Wed, May 5, 2010 at 3:16 PM, Henrik Andersson he...@henke37.cjb.netwrote:
Eric E. Dolecki
Before I can go any further, I saw this in your code:
if (1 == 1) {
... ?!?!
On Tue, May 4, 2010 at 2:58 PM, Mattheis, Erik (MIN - WSW)
ematth...@webershandwick.com wrote:
Here's a snippit and a timeline version of it - when I run it on the
timeline, it works as expected, but when I run
Yup - using VOs now - and I have produced documentation with VisDoc that
include them as well. Thanks everyone.
Eric
On Thu, Apr 29, 2010 at 8:23 AM, Merrill, Jason
jason.merr...@bankofamerica.com wrote:
A generic object has no meaning, you lose typecasting and all the
benefits of using a
I think that's a new-fangled fishing lure used for freshwater carp or
something.
On Thu, Apr 29, 2010 at 10:57 AM, Glen Pike g...@engineeredarts.co.ukwrote:
What's Silverlight?
On 29/04/2010 15:51, Merrill, Jason wrote:
Funny, Jobs makes no mention of Silverlight anywhere in that article.
function shakeBtn(e:Event):void {
e.target.main.rotation+=Math.random()*8-4;
I think that should work
On Wed, Apr 28, 2010 at 8:36 AM, Lehr, Theodore
ted_l...@federal.dell.comwrote:
so I have:
flower.addEventListener(MouseEvent.ROLL_OVER,jiggle);
function jiggle(e:Event):void
{
think because the e at that point is for the timer
From: flashcoders-boun...@chattyfig.figleaf.com [
flashcoders-boun...@chattyfig.figleaf.com] On Behalf Of Eric E. Dolecki [
edole...@gmail.com]
Sent: Wednesday, April 28, 2010 8:49 AM
To: Flash Coders
1 - 100 of 410 matches
Mail list logo
