Get a hardware programmer for BIOS chips (e.g. cheap CH341A) together
with SOIC8 test clip (if your type of BIOS chip is indeed SOIC8, I
just looked at some photos of your board online...) and do In-System
Programming with a flashrom. Thanks to a test clip you will not need
to solder your board in
Calibrating delay loop... OK.
Found Spansion flash chip "S25FL164K" (8192 kB, SPI) on ft2232_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x! Expected=0xff,
Found=0xbd, failed byte count from 0x-0x0fff: 0x2fb
ERASE FAILED!
Reading cur
Hi, I got your emails just fine, I just didn't have time to sit down and write
a proper reply but I'm very enthusiasic about working with you !
Cheers,
Paul Kocialkowski
Le vendredi 23 septembre 2016 à 03:16 +0300, mikeb mikeb a écrit :
> Good day! I just tried reading from KB9012 and encountere
The bios of this board upgraded perfectly.
2 things to note:
* I received several nasty "Trying to unmap a nonexisting mapping!"
messages.("-c W25X80" prevented these)
* I need to clear the BIOS setup using the jumper
Enclosed is the log for the probe (with "-V")
Jelle Martijn
--
---
