Re: [flashrom] hope this helps pomona soic 8 Clip raspberry pi 3

Hi, On 20.05.2018 14:41, garrett aherhgf wrote: > udo flashrom -r ~/efi/read1.bin -V -p linux_spi:dev=/dev/spidev0.0 you should always specify the `spipseed` parameter to `linux_spi` as well. The default has changed in Linux and is too high now for most flashing applications. Nico

Re: [flashrom] hope this helps pomona soic 8 Clip raspberry pi 3

Maybe you don't have enough power for this soic 8 chip, or too long wires? Could you please tell us the markings written on a chip, to confirm if it is among the chips supported by flashrom? Best regards, Mike On Sun, May 20, 2018 at 3:41 PM, garrett aherhgf

[flashrom] hope this helps pomona soic 8 Clip raspberry pi 3

udo flashrom -r ~/efi/read1.bin -V -p linux_spi:dev=/dev/spidev0.0 flashrom p1.0-77-gf9a3055 on Linux 4.14.34-v7+ (armv7l) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endian Command line (5 args): flashrom