Hi,
There might be a solution if you want to update to the latest firmware. In
section 2.1.4 of the board manual you have an option to recover bios after
a failed update or corruption. You need an usb stick and the bios file
renamed per instructions in the manual. You need to put that file on the
On Tue, 10 Mar 2015 00:24:20 +0100
Márton Miklósmartonmiklosq...@gmail.com wrote:
Hello all,
I have tried to flash an Asus M2N-MX board, and it failed (if I think it
well it needs board enable patch).
The chip is a SST49LF040B as the flashrom detected. (Checked physically)
Product page can
Hi hi regarding the board enable problem you might not have permission to
write the boot block. You can check this by checking if there are 3.3 V on
the no.8 pin of the PLCC. If you do not have then you must enable a Gpio to
pull this high ( +3.3 V) . I have the same problem but haven't got the
On Tue, 10 Mar 2015 00:24:20 +0100
Márton Miklós martonmiklosq...@gmail.com wrote:
Hello all,
I have tried to flash an Asus M2N-MX board, and it failed (if I think it
well it needs board enable patch).
The chip is a SST49LF040B as the flashrom detected. (Checked physically)
Product page
Hello all,
I have tried to flash an Asus M2N-MX board, and it failed (if I think it
well it needs board enable patch).
The chip is a SST49LF040B as the flashrom detected. (Checked physically)
Product page can be found here:
http://www.asus.com/Motherboards/M2NMX/
Latest BIOS can be found
