Looking at "Reading flash... done.", I think you've dumped it successfully
On Thu, Feb 4, 2021 at 5:02 PM beba beba via flashrom <flashrom@flashrom.org> wrote: > > i probly like > _030221_1_MHZ.bin -c S25FL128S......1 > flashrom v1.0 on Linux 4.4.71+ (armv7l) > flashrom is free software, get the source code at https://flashrom.org > > flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endian > Command line (9 args): ./flashrom -p > linux_spi:dev=/dev/spidev2.0,spispeed=1000 -V -o FILE_030221_1MHZ.log -r > FLASH_CI_modul_030221_1_MHZ.bin -c S25FL128S......1 > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Initializing linux_spi programmer > Using device /dev/spidev2.0 > Using 1000 kHz clock > The following protocols are supported: SPI. > Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 > 0x01, id2 0x2018 > Found Spansion flash chip "S25FL128S......1" (16384 kB, SPI) on linux_spi. > Chip status register is 0x00. > Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not > set > Chip status register: Program Fail Flag (P_FAIL) is not set > Chip status register: Erase Fail Flag (E_FAIL) is not set > Chip status register: Block Protect 2 (BP2) is not set > Chip status register: Block Protect 1 (BP1) is not set > Chip status register: Block Protect 0 (BP0) is not set > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > This chip may contain one-time programmable memory. flashrom cannot read > and may never be able to write it, hence it may not be able to completely > clone the contents of this chip (see man page for details). > === > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom@flashrom.org if any of the above operations > work correctly for you with this flash chip. Please include the flashrom log > file for all operations you tested (see the man page for details), and mention > which mainboard or programmer you tested in the subject line. > Thanks for your help! > Reading flash... done. > linaro@tinkerboard:~/flashrom_ci_modul$ > > > > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org -- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/ _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
