Hi,
On 14.08.2018 19:50, Владимир Амельянович wrote:
> I would be nice to get the patch. I will check my board tomorrow.
> I have 3 different boards. Would you like to get reports from all of them?
it seems the issue is already mitigated by other changes in the core
of flashrom (though, the
On 14.08.2018 10:53, Владимир Амельянович wrote:
> I made 3)
> 3) verify image - flashrom -p
> internal:laptop=force_I_want_a_brick,ich_spi_mode=auto
> -v boxpc899_0.rom
>
> And result is VERIFIED.
Heh, I missed this (your other mail went into another folder). So you
can ignore my other mail, I
Hi Владимир,
On 14.08.2018 09:46, Владимир Амельянович wrote:
> I have tried to write saved image finally. And got the following message:
>
> FAILED!
> Uh oh. Erase/write failed. Checking if anything has changed.
> Reading current flash chip contents... Reading 8388608 bytes starting at
>
I made 3)
3) verify image - flashrom -p
internal:laptop=force_I_want_a_brick,ich_spi_mode=auto
-v boxpc899_0.rom
And result is VERIFIED.
2018-08-14 10:46 GMT+03:00 Владимир Амельянович <
amelyanovich.vladi...@gmail.com>:
> Hello,
>
> 1) save image - flashrom -p
>
Hello,
1) save image - flashrom -p
internal:laptop=force_I_want_a_brick,ich_spi_mode=auto -r boxpc899_0.rom
2) write image - flashrom -p
internal:laptop=force_I_want_a_brick,ich_spi_mode=auto -w boxpc899_0.rom -V
-o /lib/live/mount/medium/
I have tried to write saved image finally. And got the
Hello Nico,
Thank you very much for your information.
Does the image of SPI chip which i get with -r key contain BIOS firmware
or BIOS settings or both?
My goal is to create BIOS master image which i can write to 10,20,100
devices with same hardware.
Regards,
Vladimir
2018-08-09 22:11
Hi Владимир,
On 08.08.2018 10:07, Владимир Амельянович wrote:
flashrom -p internal:laptop=this_is_not_a_laptop didn't change anything
yes, because your BIOS claims that it's a laptop: `DMI string
chassis-type: "Notebook"`.
flashrom -p internal:laptop=force_I_want_a_brick show more info.
Hello Владимир,
On 07.08.2018 11:14, Владимир Амельянович wrote:
> Thank you for information.
> One more question.
> I have industrial PC, manufacturer didn't provide any BIOS tool.
> When i run flashrom i get the warning about problems with unsupported
> laptops BIOSes and the following
Maybe it would've been easier to just tear down that PC and directly
connect to a BIOS chip (In-System Programming, using some test clip to
avoid the soldering, or maybe your chip is socketed so you could
remove it and insert to your hardware programmer). Although this way
requires you to have the
Thank you for information.
One more question.
I have industrial PC, manufacturer didn't provide any BIOS tool.
When i run flashrom i get the warning about problems with unsupported
laptops BIOSes and the following message:
"Aborting.
Error: Programmer initialization failed"
I use command
On Mon, 6 Aug 2018 10:07:47 +0300
Владимир Амельянович wrote:
> Hello.
> Please could you help me?
> I have chipset "Intel ICH7/ICH7R". It is marked as fully supported. I did
> the following steps 1) made backup 2) changed some setting(disable internal
> audio) 3) made backup again. I made
Hello.
Please could you help me?
I have chipset "Intel ICH7/ICH7R". It is marked as fully supported. I did
the following steps 1) made backup 2) changed some setting(disable internal
audio) 3) made backup again. I made hexdump comparision of files from
steps 1), 3) and there are no changes at
On Thu, 2 Aug 2018 00:42:57 +0200
Stefan Tauner wrote:
> joining and speaking is possible with unregistered user names again.
Well, that turned out to be a bit too optimistic on my part... we have
re-enabled the mute mode for unregistered users for the time being. But
anybody can join the
On Wed, 1 Aug 2018 15:28:24 +0200
Stefan Tauner wrote:
> On Wed, 1 Aug 2018 11:27:12 +0300
> Владимир Амельянович wrote:
>
> > Hello.
> >
> > Please could you help me join your IRC chanel?
> > I have registered at freenode. But i recieve the following message:
> >
> > hello
> > * #flashrom
On Wed, 1 Aug 2018 11:27:12 +0300
Владимир Амельянович wrote:
> Hello.
>
> Please could you help me join your IRC chanel?
> I have registered at freenode. But i recieve the following message:
>
> hello
> * #flashrom :Cannot send to channel
Hi Владимир,
you need not only to register but also
15 matches
Mail list logo