RE: [flexbackup-help] blksize parameters

2005-06-08 Thread Erwan.CHEVALIER
À : CHEVALIER, Erwan -Syntegra FR Objet : RE: [flexbackup-help] blksize parameters On Tue, 7 Jun 2005 [EMAIL PROTECTED] wrote: [EMAIL PROTECTED] flextest]# flexbackup -test-tape-drive -compress=false -device=st0 No, -device=/dev/nst0 $device = '/dev/nst0'; This is your problem. Niall

RE: [flexbackup-help] blksize parameters

2005-06-08 Thread Niall Brosnan
. It is however, clearly marked in the config. Good luck with your restore, Niall -Message d'origine- De : Niall Brosnan [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 juin 2005 19:28 À : CHEVALIER, Erwan -Syntegra FR Cc : flexbackup-help@lists.sourceforge.net Objet : RE: [flexbackup-help

RE: [flexbackup-help] blksize parameters

2005-06-07 Thread Niall Brosnan
continue. Thanks a lot for your help -Message d'origine- De : Niall Brosnan [mailto:[EMAIL PROTECTED] Envoyé : lundi 6 juin 2005 11:46 À : CHEVALIER, Erwan -Syntegra FR Objet : Re: [flexbackup-help] blksize parameters (fwd) Hi Erwan, here is the message as sent to the list

RE: [flexbackup-help] blksize parameters (fwd)

2005-06-07 Thread Niall Brosnan
Hi Erwan, I know you've probably tried most of this. Checking back on your mail of 5 May, I see: /dev/nst0: Input/output error There is nothing flexbackup can do until that is sorted. What blocksize does mt status report on a clean boot? Can you run a simple tar to the drive? mt -f /dev/st0

Re: [flexbackup-help] blksize parameters

2005-06-07 Thread s. keeling
Incoming from Niall Brosnan: Could you include your configuration again? grep -v -e ^\# -v -e ^$ /etc/flexbackup.conf will give us just your active configuration. grep -v '^#|^$' /etc/flexbackup.conf -- Any technology distinguishable from magic is insufficiently advanced. (*)

RE: [flexbackup-help] blksize parameters

2005-06-07 Thread Erwan.CHEVALIER
À : CHEVALIER, Erwan -Syntegra FR Objet : Re: [flexbackup-help] blksize parameters (fwd) Hi Erwan, here is the message as sent to the list on Thursday. Do you usually receive list mail? Hope it helps, Niall -- Forwarded message -- Date: Thu, 2 Jun 2005 11:29:06 +0100

RE: [flexbackup-help] blksize parameters (fwd)

2005-06-07 Thread Erwan.CHEVALIER
Hi list and niall Can you run a simple tar to the drive? mt -f /dev/st0 status - I've already answered mt -f /dev/st0 rewind Nothing too [EMAIL PROTECTED] flextest]# tar cf /dev/nst0 /etc tar: Retrait de l'en-tête `/' des noms des membres mt -f /dev/st0 rewind Take time but ok tar tf