Yes. It happens.
SDR1k 1W + Home Made PA
Pentium D 2.8GHz, Delta44, WinXP Pro SP2
--
Sergey RW3PS
Has any one else had their Edge S meter freeze up.
Happens mostly when I am xmitting. Top 1/2 says power lower 1/2 shows no
needle.
Doesn't register my power out when xmitting. Nor the
Frequently. And you are right the only way to cure it is to out the program
and restart it.
Jim, W4ATK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, October 25, 2006 8:15 PM
To: FlexRadio@flex-radio.biz
Subject:
Yes this happened to me last week I noticed I had 0 Watts out while
transmitting on 60 meters. I tried a couple of things but made no
difference.
Shortly after that I turned the PA Amp off and worked a person in TN on
1/4 watt on 60 meters. When I did that the edgemeter worked. When I
turned
Eric
I wish to join Bob and express my sincere thanks and congratulations.
73
José F5JD
Robert McGwier a écrit :
It pleases me greatly to announce that Eric Ellison has been presented
with an award from AMSAT. It is sometimes easy to take for granted
what seems to many to be a small thing.
Is anyone planning on running the FMT measurement using the SDR-1000 this
coming month? If you have any past experience, I would appreciate any tips
you may have. 73, Hank K9LZJ
Hank Wolfla
1308 S. Peace St.
Greenfield, IN 46140
[EMAIL PROTECTED]
[EMAIL PROTECTED]
317-861-0186
Cell:
Eric as a new member of AMSAT, and a SDR-1000 owner I wanted to say
congratulations. I hope this honor in some very small way lets you know how
much your efforts are appreciated.
Hank - K9LZJ
Hank Wolfla
Lyman H. Wolfla II, Inc.
1308 S. Peace St.
Greenfield, IN 46140
[EMAIL PROTECTED]
[EMAIL
I got plenty of help on this a couple weeks ago and after following the
knowledgebase all worked well.
Guess I may need it again.
I am using v1.6.3 SVN 701
I set wave options to Post for Receive and Pre on Xmit
Once I record and just play back to myself it plays back 11hz down the
band and
Congratulations Eric, on this well-deserved award and acknowledgement.
Also, particular thanks to you for your tireless enthusiasm for all
things SDR -- it's highly contagious!
73, Dale
WA8SRA
Robert McGwier wrote:
It pleases me greatly to announce that Eric Ellison has been presented
with
Scott,
Reverse the wave options - pre for RX and Post for TX
There is no need to have the MOM or MOX engaged. Just play the file.
There is a KB article that explains this in the works. I just have not
had time to make the appropriate screen shots.
-Tim
---
Tim Ellison
Integrated Technical
When I checked for svn updates today, I got a message saying at version 702
when I had been at 701. I usually get an updating to ### when the
subversion changes. But the exe title bar shows subversion 701 still.
I deleted the Release directory and checked it out again but still get at
702
Tim,
Since we're on the subject of wave file recording and playback, have you
encountered offset frequencies when playing back pre-processed audio?
For instance, if I record the approx. 20 to 40 kHz above below (depending
on whether I'm in 48K or 96K sampling) a local MW station at 1000 kHz, I
This was Eric's recent answer to this question:
Sure. I assume this is because you are playing back a post-processed
wave file with audio at baseband. Further, it is not I/Q audio.
What the software is looking for is an I/Q audio stream that has an
11kHz IF. It uses a software oscillator to
-radio.com http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20061026/e5391251/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
Jerry,
When you don't have the SDR-1000 connected, you need to disable PTT on the
Setup form. The control port on the PC thinks PTT is pressed when nothing
is connected.
73,
Gerald
Gerald Youngblood, K5SDR
FlexRadio Systems
Ph: 512-535-5266
Fax: 512-233-5143
Email: [EMAIL PROTECTED]
Web:
/attachments/20061026/a14cfd4a/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage
mine also freezes ...many times a day...usually after running minimized
im running a dual core pentium with 2g of ram...runs at less then 20%
all the time
steve
kw5tx
Tim Ellison wrote:
Yes. It happens to me all the time. I have discussed it with Eric and so
far I have not found a
I am trying to deploy my SDR in contest mode again. Brad (AI0BP) and I
are going to North Dakota tomorrow to show off the SDR to students at
North Dakota state and do a little contesting.
Look for W0HSC.
I figure, someone still wants some North Dakota QSOs.
One thing I would very much like to
Namesake,
I squint at my PMUCB and pronounce: With the board plugged into the
SDR-1000 the LED is up, the PTT from the foot sw is left connector
toward the BNC RF output jack, amp output is middle and mute from
elsewhere is right toward the parallel connector. This is facing the
rear of the
Thanks for the replies, both on and off list.
Jeff/KA5MIR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
-- Original Message --
Date: Thu, 26 Oct 2006 13:38:42 -0400
Many of you only update the trunk and some of you only update the bin
directory in the trunk. Several of us maintain branches outside of the
trunk. John Eckert has been provided a branch in the svn tree. He has
Having been
I am getting this same error message when I checked. It had been working
fine until this evening so maybe its a problem with the server.
73 Jay
Jay Hainline KA9CFD EN40om
Colchester, IL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL
Hi,
SVN was working fine through 701. I downloaded and installed 1.6.3B
in its own directory. Now when I select SVN update, I get an error
message that says: Cannot replace a directory from within. When I
select log, it says something about 716. What do I have to do to get
it working
This also happened to me. When I tried to update svn I had some files
removed. I did a revision listing and found some explainations of file and
folder removals? I don't know what this means but plan on going back
through the whole svn install.
73's
Joe
WD5Y
Hi,
SVN was working fine through
Larry Taft wrote:
Namesake,
I squint at my PMUCB and pronounce: With the board plugged into the
SDR-1000 the LED is up, the PTT from the foot sw is left connector
toward the BNC RF output jack, amp output is middle and mute from
elsewhere is right toward the parallel connector. This is
I believe, you have to actually pick the SVN you what to update to since
now we will be having SVNs #s being generated by two parties that are
different source branches. If this is the case, it is going to get
rather confusing
Update to 701 and see what happens.
-Tim
-Original Message-
The */bin/Release sub-directory seems to be gone now...
Maybe whoever is changing it will let us common folk know what's going on and
where to look for the binaries when it's done. :)
Jeff/KA5MIR
On Thursday 26 October 2006 22:06, Tim Ellison wrote:
I believe, you have to actually pick the
I just tried an up date on SVN and PowerSDR.exe is no
longer with me
A check of the log reveals
Revision: 720
Author: k2ox
Date: 10:22:38 PM, Thursday, October 26, 2006
Message:
Removed file/folder
Deleted :
/PowerSDR/branches/k2ox/PowerSDR/tags/PowerSDR1.6.3A/Release
73 W9OY
27 matches
Mail list logo
