Tim, I have 1.8.0 and SVN 1186, 1246 that work OK.
Beginning with SVNs 1315, I have the problem. 1315 doesn't work at all.
1323, and 1355 are bad.
Jim, W4ATK
-Original Message-
From: Tim Ellison [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 24, 2007 10:06 PM
To: Bob Tracy; Jim, W4ATK
I've had that trouble also
Add a secondary keying port and it tends to send a dit before a character
that starts with a dash
and vice versa
send a dash before a character that starts with a dit.
unless your real real precise with your keying
It's like, there are two paths to the cw generator.
Part of the problem is...in my system.
CWX requires the key option of Iambic to be disabled
and if using the paddles
The option of Iambic must be enabled (or use it as a straight key)
So my question is:
Shouldn't the software be smart enough to know that a CWX buffer or keypad
was being used?
John,
Thanks - you saved me a bug report. I saw this problem again last night and
thought I ought to report it...
My experience is with trying to use CWType on a virtual com port (assigned to
the secondary keyer) and using
a real key connected to COM1 as the primary keyer. As soon as I
Bill,
CWX requires the key option of Iambic to be disabled
I'm sitting here keying the SDR1K key jack with my paddles, then switch to
WW and send a canned message and never take the DSP keyer out of Iambic.
Not sure what is going on with your system.
Bob K5KDN
-Original Message-
From:
N8FNR
-- next part --
An HTML attachment was scrubbed...
URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-
radio.biz/attachments/20070725/a86987e3/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
In message [EMAIL PROTECTED], Eric Wachsmann
[EMAIL PROTECTED] writes
For the SDR-1000, it would just be a PowerSDR software update. With the
FLEX-5000, we would need the PowerSDR update along with a firmware update
for the hardware.
Rest assured that this would happen very quickly. For
That is definitely the case with the SDR-1000 as the RX signal rolls off
very quickly over 65MHz. I honestly am not sure with the FLEX-5000. Our
specifications do not go that high though.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
I should add that this is no problem with either radio with a transverter or
some sort of undersampling with the proper filtering.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ian Wade
Sent: Wednesday,
--
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070725/54c6fa63/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
-radio.biz/attachments/20070725/988e9946/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio
/flexradio_flex-radio.biz/attachments/20070725/b2560313/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex
/flexradio_flex-radio.biz/attachments/20070725/fcef468a/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex
It may be confusing as we have done it, but w9ol's problem is not caused
by the equalizer.
The equalizer is left enabled on the form but in the CW, DIGL, DIGU, and
DRM, it is simply not applied on TX or RX. This is easily seen in the
code by looking at sdr.c and the routine do_tx_pre. In
This is some bug that has been introduced when adding the Flex5000
Firewire keying. Please report exactly what you have said here in the
bug reporting form.
Bob
FireBrick wrote:
I've had that trouble also
Add a secondary keying port and it tends to send a dit before a character
that
/20070725/a86987e3/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http
-radio.biz/attachment
s/20070725/b2560313/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio
Running Softrock Lite 40m under PowerSDR 1.9.1 beta. It works well,
except when I tune in the big spike at the center frequency (7.056 MHz)
and turn on the ANF. CPU utilisation shoots up to 100%, everything
freezes and the audio out is a rasping multi-frequency tone.
Under PowerSDR 1.8.0 this
Did you re-calibrate the radio for the apparent change in readings?
When I change the software, I get out the calibrator and check to
make sure something hasn't changed.
At 10:54 AM 7/25/2007, you wrote:
Running Softrock Lite 40m under PowerSDR 1.9.1 beta. It works well,
except when I tune in
-radio.biz/attachments/20070725/7575b1c0/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio
I will send emails to groups of 30 at a time requesting shirt size and
operating info. My intent is to dispatch the subject email 1 week before
shipping. The first 30 notifications went out about 10 days ago; however,
the ship date has slipped once again (see Gerald's weekly update.)
I have
Similar thing happens with the 1.91 Beta version I downloaded from
Flex's website - running with one power level on band A, change to
band B, then back to band A and the power level has changed markedly.
Then if I change the slider position but immediately return it to the
original position,
Further justification for our high opinion of flexradio.
Jim - W4YXU
P.S. Will you quote a price for the t-shirts?!
Really would have worn one 2 weeks ago at a competitors presentation !
- Original Message -
From: Gerald Youngblood [EMAIL PROTECTED]
To: 'Flex Radio'
Ian,
You are correct that the voltages seen by the soundcard did not change. But
Cecil is correct. There is a software compensation in order to calibrate
the receive levels. If that parameter is different in the database for each
version, then you'll see that difference show up on the display.
At 03:26 PM 7/25/2007, you wrote:
In message
[EMAIL PROTECTED],
k5nwa [EMAIL PROTECTED] writes
Did you re-calibrate the radio for the apparent change in readings?
When I change the software, I get out the calibrator and check to
make sure something hasn't changed.
No, I did not re-calibrate.
Is there a way to find out where one is in the queue for shipping?
Dave N1IX
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gerald Youngblood
Sent: Wednesday, July 25, 2007 7:33 PM
To: 'Flex Radio'
Subject: [Flexradio] FLEX-5000 Production Status
Dear FLEX-5000 customers,
Last week I posted the following message to the reflector regarding
production status:
http://www.mail-archive.com/flexradio@flex-radio.biz/msg17022.html.
Last week we believed that we would be able to begin first shipments of
production units this week. While it is
://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070725/54c6fa63/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http
? Get great deals
to amazing places on Yahoo! Travel.
http://travel.yahoo.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20070725/7575b1c0/attachment.html
In message
[EMAIL PROTECTED],
k5nwa [EMAIL PROTECTED] writes
Did you re-calibrate the radio for the apparent change in readings?
When I change the software, I get out the calibrator and check to
make sure something hasn't changed.
No, I did not re-calibrate. The hardware was absolutely
/pipermail/flexradio_flex-radio.biz/attachments/20070725/b0180035/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio
/flexradio_flex-radio.biz/attachments/20070725/b0180035/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz
Well, I never thought to try disabling the CAT port. I really thought at
firs it was me and my paddles. Thanks guys, WOW! Maybe I am not as senile as
I thought! I will check out the bug report after it gets posted and see if
there is anything I can add, but it sounds like the problem is
33 matches
Mail list logo
