I was holding back this message for a long time, because dont know, if
it will help.
On my side it cured the problem of the hanging TX to RX complet.
When at beginning of August my Flex5000 missbehaved and I was hardly
ever able to have disent qso, I always had the hanging problem,
I observed,
The 23/Feb Flex Radio Friends TeamSpeak
zipped mp3 (1 hour) plus a .txt file of
the channel comments is available at:
http://www.hamsdr.com/dnld.aspx?id=742
or
http://www.hamsdr.com/dnld.aspx
Record time was 2:09
Mike - AA8K
___
NC0B:
Comments on testing radios.
One can test radios with really clean OCXOs, but that does not give
much flexibility.
W6RMK:
Unless you're independently wealthy and can afford a whole batch of
oscillatorsgrin
When that person steps forward, the following would be an interesting
receiver
Quoting Bill Tippett [EMAIL PROTECTED], on Sat 23 Feb 2008
06:56:18 AM PST:
NC0B:
Comments on testing radios.
One can test radios with really clean OCXOs, but that does not give
much flexibility.
W6RMK:
Unless you're independently wealthy and can afford a whole batch of
Hi again fellow Flexers!
To continue the story below I lifted pins 9 and 8 on IC4C and connected pins 1
and 2 instead and re-connected pin 13 on IC 1 on the PIO board and pin 10 on IC
1 on the BPF board after finding I had TX/RX 5V on J5 pins 4 and 5 again - and
thus I actually got T/R switching
I need to purchase a Delta 44 Breakout Box Replacement. Does anybody have the
e-mail address for KA9YIG? I am not finding it in the Knowledge Base or QRZ.com
John, AI6A
[EMAIL PROTECTED]
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I was trying to operate in the NAQP-RTTY contest this weekend kept running
into a PowerSDR crash with my Flex-5000A.
Periodically the following error message would appear:
An exception 'System.ExecutionEngineException' has occurred in
PowerSDR.exe.
While the message was displayed, PowerSDR was
Sorry about the duplication, but forgot a subject line the 1st time.
I was trying to operate in the NAQP-RTTY contest this weekend kept running
into a PowerSDR crash with my Flex-5000A.
Periodically the following error message would appear:
An exception 'System.ExecutionEngineException' has
Just a reminder of the Flex SDR Discussion Net on 20 meters @ 1 PM
Central .. Also on QSOnet.com with the CQ-100 interface on the
Internet at 14.329 also.
I am sorry that I was available last weekend, I had a bad case of
flu, and just could not make the net, but should be there Sunday
I have created several profiles for rtty one using 1500 as the center
freq and the other using 2210 as the center freq. Both with a width of
400hz. The problem I encounter is the 2210 filter with a high of 2410
and a low of 2010 can not seem to hold the low frequencey. It always
changes to
10 matches
Mail list logo
