Re: [Flexradio] Rx Drops Out While Tuning.

Thanks all for your suggestions. The problem seems to be pretty much resolved as long as Spur Reduction is turned on. I don't have any extra PCI slots..this MB came with 2 PCI slots and 1 PCI Express slot..all three are filled with cards I need to have. And no, I'm not going to spend $80+ for a

Re: [Flexradio] Applications/Programs

Takafumi, Make sure that you have the FireWire buffer set to the same size as the Audio tab buffer in setup.. Also by the DPC setting you gave, you should be running at least Safe Mode 1 in the Operational Mode..You might even try Safe Mode 2 or 3.. For some reason system resources (m

[Flexradio] (no subject)

please stop my email. too much Steve McGuire Quality Assurance Manager FoodPharma 10012 So. Painter Ave. Santa Fe Springs,Ca 90670 Tel: 562-944-7821 Fax: 562-944-1308 e-mail [EMAIL PROTECTED] ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz ht

Re: [Flexradio] Applications/Programs

This sounds like perhaps the driver buffer size wasn't matched to the Audio Buffer size in PowerSDR. This would cause some instability over time (especially after longer DPC events). Note that you can not set the driver buffer size below the recommended size in the newer driver unless you are in

Re: [Flexradio] Applications/Programs

Hello, I have a similar problem here with my Flex5k. The radio starts to sound choppy after 10 to 20 minutes with 96k sampling rate. Clicking the start button solves the problem but it happens again after another 10 minutes or so. With 48k sps it does not seem to occur. The radio had worked flaw

Re: [Flexradio] 3000 Interior View

Yes. Due to the major changes done this weekend to the web site, the FLEX-3000 Detailed Features web page did not get completed. There will be updated FLEX-3000 pictures later this week. -Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rod Brink

[Flexradio] 3000 Interior View

Can we see an interior view of the SDR 3000? Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Kn

Re: [Flexradio] offer for current flexers?

Gee whiz, John! That just isn't fair! With all of the discussion recently over the soft and firmware I haven't felt it wise to rock the boat by installing the rfio, RX2 and ATU---all sitting here awaiting action on my part. No, I don't expect any refunds! but maybe you could put a note on t

Re: [Flexradio] SDR 5K with NO Transmitter Output ??

The Henry 2 K will kill the switch transistor (relay) in the 5000 if you connect it directly to the Henry without a buffer relay. This happened to me twice! John P. Basilotto W5GI -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry W8ER Sent: Saturda

Re: [Flexradio] offer for current flexers?

WE will offer a $50 discount on an RX2 and a $25 discount on an ATU to anyone who purchased a Flex-5000 directly from FlexRadio Systems. 73 John P. Basilotto W5GI Chief Operating Officer Marketing and Sales Office 512 535-5266 Fax 512-233-5143 13901 Pond Springs Rd Suite 250 Austin, TX 78729