Why don't you get a 4 pin to 6 pin firewire cable and use the internal card?
OR Buy this
Also make sure you have the latest version of .Net installed
73 W9OY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
I have been using my MFJ 998 with the Flex 1000 , I simple do the 15
watts on the driver and let the MFJ
sense the RF from the 1000 .I would like however to use a hard wire
between the MFJ and the 1000 .
Dudley mention to me on the phone that some Flexers had developed
software so that the
Bob has put in thousands of hours into the development of this software. In
fact the reason you have such a nice radio to use is in no small part because
it came out of the brain of N4HY. I did not find his response in the least
offensive.
Before one complains one migh ask precisely how
The question is whether you want something now or something that we
know works. Its kinda like the people who complain when flights are
delayed due to weather: do you really want to fly in a plane that the
pilot doesn't want to fly?
As with all new architectures (I am sure its your
Yes, Lee, that is my next move ... I am just away for weekend ... took just
what I thought I needed to my weekend place (which included a card pretty much
like what your link points to and the original 6/6 firewire cable that ships
with the F3K) ... what's that expression? Man plans and G_d
That's a good thought ... I will check!
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Lee A Crocker
Sent: Sunday, May 10, 2009 9:55 AM
To: Flexradio
Subject: Re: [Flexradio] Flex-3000 installation problem
Also make sure
Geez, guys... Why is it that any time anybody raises just a little
negative criticism they get jumped on? Give Barry a break.
Barry, and all of us, bought a radio an integral part of which is the
software that runs on a host PC. That software is pretty good, but it's
far from perfect. I think
I am a paying customer and I haven't paid a cent for any of the improvements in
the radio. Additionally, the improvement in performance for a conventional
radio cannot compare to that of a software radio. Read my post again and
explain how I'm implying that Flex should charge for software
hi
is any please can recommend fire wire card for the Sony viao laptop ?
or any fire wire card will work ?
ET Paim
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
http://kc.flex-radio.com/KnowledgebaseArticle50179.aspx
There are two recommended ExpressCard Firewire cards. If your laptop only
had a standard PCMCIA slot, you can by a sled adapter to use the
ExpressCard in your PCMCIA slot.
Scott, N5KRC
On Sun, May 10, 2009 at 1:11 PM, elan paim
can any one let me know if this card will work ok
LET'S SEE ANYONE TOP THIS REPLY
- Original Message -
From: Kirk K6KAR
To: 'Stewart Haag'
Sent: Sunday, May 10, 2009 3:06 PM
Subject: FW: [FlexRadio] Re: Flex-3000 Limited TX Bandwidth
From: Kirk K6KAR [mailto:kirk.hard...@cox.net]
Sent: Sunday, May 10, 2009 10:23 AM
To:
The two-test in the setup/test panel accomplishs the same thing. A PEP
Wattmeter is required or a Monitor scope. If one only has a average
wattmeter, they will see the average power and not peak. Two tone tests
were the industry standard for many years and built into litterally all
monitor
Has anyone else experienced Serial PTT problems with SVN 3035 ?
Bug report has been filed
It works ok with 1.18.1 and the VS2008 branch
Dave - W0DHB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
On behalf of Gerald and the entire FlexRadio team, congratulations are
are extended to this year's Flexi Award winners!
The Flexi™ is to the software-defined amateur radio world what the
Oscars and Emmys are to the film and television communities – the
highest form of recognition that an
To all who will be attending Dayton this year:
FlexRadio Systems will be hosting a dinner and a FlexRadio forum with
presentations on the future of FlexRadio Systems products along with
one-on-one discussion groups and of course the famous Flexi Award
presentations. For additional detailed
Hello,
After thinking about it for a day or so, I opened the box.
Now I have completed the F5KA set up all went well.
Very impressed all as expected and more.
Firewire card used is a Shintaro 1394Ai.
Desktop PC intel duel core E5200.
Windows XP.
73 to all de John VK6AI
I was at the beach this past week having a great time operating remote on my
5000A. Then after 5 days of it working great, my recieve went out?? I
thought maybe my dipole went down but my swr's were ok and the power out was
ok...Got home and sure enough my dipole is great...I hooked it to my
It could be the HRFIO board or the mini RX-IN coax connector on the HRFIO board
has come disconnected.
I assumed you tried all of the ANT-x ports to see if the fault was isolated to
just one port?
One quick and dirty test is to do a database reset and see if that corrects the
problem. If
20 matches
Mail list logo