Dave
In setup , general tab - make sure the receive only box is unchecked.
If that doesn't work, try starting with a new database.
Sorry for your frustration, but after having my 5000 for 18 months --
after the initial learning curve things settled in and I can just jump
on and operate...
Hello all,
I have the DX Engineering remote coax switch and would like to control it via
my PC over USB if possible. Is there a PC interface out there that can select
1 of 8 relays?
Dennis Petrich
Amateur Radio Station K0EOO
Lakeville Minnesota USA
k0...@arrl.net
952-898-1082
I am not aware of one that uses USB, but there is parallel (port) to BCD
interface that works with DDutil quite well.
Mel, K0PFX
- Original Message -
From: radio...@frontiernet.net
To: Flexradio FlexRadio@flex-radio.biz
Sent: Monday, July 06, 2009 7:43 AM
Subject: [Flexradio] PC
Have a look at the BCD-10 at http://www.unifiedmicro.com/decoder.html
. Drive it from DDUtil with a parallel port if you can arrange a
parallel port with a USB to parallel converter.
Jerry W4UK
At 12:43 7/6/2009, you wrote:
Hello all,
I have the DX Engineering remote coax switch and would
There are!
A couple of different options...
I've used a serial controlled 8 port unit for many years - it works well
and is inexpensive.
http://www.electronickits.com/kit/complete/elec/ck1610.htm
You will need a serial port to control it.
There are USB units out there too - they all seem to
To my knowledge there are NO usb to parallel adapters that work as real
parallel ports. I've spent a lot of time researching these things and they
are all printer ports only. Also, the Flex usb to parallel adapter sold for
the SDR1000 won't work either, it's designed specifically for the SDR1K and
Thanks to all who responded to my question. I got lots of good input on how to
control my remote coax switch via parallel port and DDUtil. So, I should be
good to go...
73,
Dennis Petrich
Amateur Radio Station K0EOO
Lakeville Minnesota USA
k0...@arrl.net
952-898-1082
- Original Message
There is still the few seconds delay when PTT goes via CAT control. No
delay
when PTT control goes via second virtual Com port.
So, for HRD, I continue using CAT except for PTT. There is no such
I know Simon said he'd look into this, but just to add an additional
confirmation: I've seen
I doubt there's any difference: I must test this with F5JD - I think he must
be on holiday at the moment.
With a serial port log I'm sure I'll see where the problem is.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Peter G. Viscarola pete...@osr.com
I know
I'm standby for any possible tests that can help to fix this problem.
Eddy ON5UQ.
- Original Message -
From: Simon (HB9DRV) si...@hb9drv.ch
To: Peter G. Viscarola pete...@osr.com; flexradio@flex-radio.biz
Sent: Monday, July 06, 2009 8:05 PM
Subject: Re: [Flexradio] HRD V 5
I doubt
We're working on it now...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Eddy Van de Velde van.de.velde.e...@telenet.be
I'm standby for any possible tests that can help to fix this problem.
___
FlexRadio
I'm an almost 100% digital mode operator.
I started using my SDR-1000 back when PowerSDR 1.8.0 had just been
released. Subsequent releases of PowerSDR always turned-up a different
set of clicks, pops and artifacts... and sent me back to basically
Square One setting VAC parameters, buffer
I'll have to talk to the person who handles the serial I/O in PowerSDR, also
I need the latest command set - for some commands I am getting errors
returned.
Who is currently responsible for the CAT interface?
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From:
Peter,
Thanks for the update.. Sometimes the progression is not as obvious
when taking small steps. There are alot of other changes in there too..
73,
Dudley
WA5QPZ
Peter G. Viscarola wrote:
I'm an almost 100% digital mode operator.
I started using my SDR-1000 back when PowerSDR
The bug-slayers have been unleashed...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Simon (HB9DRV) si...@hb9drv.ch
Who is currently responsible for the CAT interface?
___
FlexRadio Systems Mailing List
In older versions of PowerSDR I would correct the clock offset (of my
SDR-1000) using the Phase display as described in the KB article...
Tune in WWV and adjust the clock offset carefully until the dot on the
phase display moved very slowly in a circle or stopped entirely.
In this latest
Change to DSB mode rather than SAM or AM
http://kc.flex-radio.com/KnowledgebaseArticle50175.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Peter G. Viscarola
Sent: Monday, July 06, 2009 5:00 PM
To:
Check your mode setting, you are probably in SAM.
Bob K5KDN
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Peter G. Viscarola
Sent: Monday, July 06, 2009 4:00 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Fine
Change to DSB mode rather than SAM or AM
http://kc.flex-radio.com/KnowledgebaseArticle50175.aspx
Check your mode setting, you are probably in SAM.
Both spot on... Duh! Thanks...
Peter
K1PGV
___
FlexRadio Systems Mailing List
Peter,
The same, except be sure to take it out of SAM, if it's working
correctly, it should always be zero beat.Now with 18.1 you can also
have it auto calibrate closer than you can by manually moving the DDS.
Go to WWV, 10 mhz ( you and use another calibrated freq, you just will
have
Yes, the drawings are preliminary but reasonably accurate.
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
Tune in excitement! (TM)
-Original Message-
From: flexradio-boun...@flex-radio.biz
It will need options for D-STAR and APRS, please.
Gerald Youngblood wrote:
Yes, the drawings are preliminary but reasonably accurate.
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
Tune in excitement!
Hi,
I was wondering if Gerald or others could comment on the long term viability of
the SDR1000/Janus/Ozy arrangements. Yes the new notes on 1.18.1 indicate that
HDR is not supported. Is this temporary or permanent arrangement?
May be I incorrectly thought that once a sound card was
APRS is already available via VAC with sound card based ax25 programs..
TOM BLACKWELL (nt) wrote:
It will need options for D-STAR and APRS, please.
Gerald Youngblood wrote:
Yes, the drawings are preliminary but reasonably accurate.
Gerald Youngblood, K5SDR
President
FlexRadio Systems
24 matches
Mail list logo