latest PowerSDR.
I attempted to do the following:
Upgrade firmware to 1.3.0.0
Uninstall Flex driver
Installed Flex firewire driver
Download PowerSDR 1.16.0.
Install in new folder.
PowerSDR comes up with an error it needs version 1.2.0.3+ firmware and
current version is 1.3.0.0
Dave
wo2x
delivery, such as
UPS or Parcelforce, that will need to be priced up and agreed before
posting.
I can provide digital photos if required.
No soundcard, as I am currently selling that on eBay, but I can give you
the eBay reference number if you want it.
Dave (G0DJA
Hi All,
The other day I went to the Flex Radio main web page and it showed firmware
version 1.2.2.08 available. I downloaded it and installed it. All seems fine
but I noticed the web page is back to 1.2.2.02. Any issues with using ..08?
Thanks,
Dave
wo2x
My radio does this too and I am using 1.2.2.03.
I'll reload 1.2.2.02 then.
Thanks,
Dave
wo2x
--
From: Dudley Hurry [EMAIL PROTECTED]
Sent: Wednesday, October 22, 2008 2:04 PM
To: Richard Stouffer [EMAIL PROTECTED]
Cc: flexradio@flex-radio.biz
by having both panadapters turned on. Changing
VFO B from 3.500.000 to 3499.999 reveals the change.
I am using PowerSDR 1.14.0 and firmware 1.2.2.09 with SDR5000.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
At 19:07 10/12/2008, you wrote:
I would imagine it is a built in safety.. keeps you at least 5kc
away so you do not overload and fry your 2nd receive.
w9Ray
Nope, that's not it, I can put RX2 up at 3.999.000 with TX at
3.505.00 and see the same problem.
I thought it was mentioned it would do balanced or unbalanced input,
depending on how the mic plug was wired.
Dave
wo2x
--
From: Ray Andrews [EMAIL PROTECTED]
Sent: Friday, October 10, 2008 9:32 AM
To: 'Alan NV8A' [EMAIL PROTECTED]; 'Flex Group
Thanks. I do remember hearing it at one time :-)
Dave
wo2x
--
From: Tim Ellison [EMAIL PROTECTED]
Sent: Friday, October 10, 2008 10:04 AM
To: Dave [EMAIL PROTECTED]
Subject: RE: [Flexradio] [www] New FLEX-3000 web page on line
Dave
of Flex (in place of
stock fan). This fan runs quieter than the stock fan and provides more air
flow. Fan has a washable filter guard on it.
$1200 firm + shipping from New Jersey. Local pickup is OK also.
Thanks,
Dave De Coons
WO2X
[EMAIL PROTECTED
Hi All,
I am trying PowerSDR 1.14.0 with SDR-1000 w/RFE, 100 w PA, and ATU.
When trying to calibrate PA it fails (looks like high SWR) on bands 10 MHz
and above. 160 - 40 worked fine when calibrating.
Thanks,
Dave
wo2x
___
FlexRadio Systems
Just a follow up. THis is with a clean install of PowerSDR 1.14.0, not a
database import.
I went into the PA screen and clicked reset to reset all band values then
recalibrated the PA successfully.
Dave
wo2x
--
From: Dave [EMAIL PROTECTED]
Sent
PowerSDR 1.14.0 clean install. Upon startup RX2 controls stil show up
sometimes. Also in Setup/General/Options the RX2 tab is visible.
Thanks,
Dave
wo2x
--
From: Dave [EMAIL PROTECTED]
Sent: Wednesday, September 03, 2008 8:11 AM
To: 'FlexRadio
I recently released MMTTY version 1.66F, which does support Vista. Its
available via
http://www.dxlabsuite.com/MMTTY/mmtty166F.zip
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dudley Hurry
Sent: Saturday, August 30
://www.dxlabsuite.com/MMTTY/mmtty.chm
The release note is appended below.
73,
Dave, AA6YQ
MMTTY version 1.66F release note
2008-08-17
1. Changes to the MMTTY Setup window
==
A. TX tab
- renamed the PTT panel to PTT FSK (tnx to Joe W4TV)
- added com8 through
You can always have multiple copies of PowerSDR on your computer. Dedicate a
copy per band with the optimal image rejection settings for that band.
Band changing will not be as easy but at least you'll have the settings you
desire.
Just a thought until something better comes along.
Dave
wo2x
Hi All,
Anyone have instructions to install the external reference oscillator kit on
an SDR-1000? The knowledge base links to the SDR-1000 hardware install
manual version 3.8 but it does not have any details that I saw on proper
install.
Thanks,
Dave
wo2x
Thanks Tim,
When I searched last night it kept linking to the hardware manual.
Thanks
Dave
wo2x
--
From: Tim Ellison [EMAIL PROTECTED]
Sent: Thursday, July 31, 2008 11:31 AM
To: Dave [EMAIL PROTECTED]; flexradio@flex-radio.biz
Subject: RE
I've had PowerSDR 1.12.1 showing RX2 controls when using it with SDR-1000.
This has happened twice now.
Any ideas?
I have screen shots of it happening.
Thanks,
Dave
wo2x
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
version
from Eltima, it was little pricey but worth it, I haven't had any issues
since.
Dave - N4DWK
Ray, K9DUR wrote:
Dave, et.al.,
N8BV vCOM does work in Vista. However, the configurator does NOT work
properly. vCOM will work fine under Vista as long as you use the serial
port pairs it sets
I had one but I found it a lot more difficult than the W2IHY boxes to set
up.
If you know what you are doing the DEQ2496 can sound very nice. But most
people would not be able to get it set up correctly.
73
Dave
wo2x
--
From: Jesse N4BFD [EMAIL
Looking to buy an Elecraft XG1 or XG2 mini module for calibrating the Flex
SDR-1000.
Getting tired of lugging in the Aeroflex 2970 when I load new software and
recalibrate :-)
Contact me off list at [EMAIL PROTECTED] with price shipped to zip 07440
Thanks,
Dave
wo2x
I have a setup doc I wrote for the Flex 5000A with the W2IHY boxes and Heil
PR-40.
I'll send the files direct to you. It also includes screen shots (which were
based upon the older PowerSDR).
Dave
wo2x
--
From: Robert Cleve [EMAIL PROTECTED
And let us not we forget this classic joke going around at Windows 2000
release :-)
http://www.microbizz.nl/buglist.htm
73
Dave
wo2x
--
From: Bob McGwier [EMAIL PROTECTED]
Sent: Wednesday, July 23, 2008 12:13 AM
To: 'Dave' [EMAIL PROTECTED
always Norton
Ghost.
A good point to all the Flexers out there. Once you have everything running
fine on you system, make sure you do a backup! Norton Ghost and other 3rd
party utilities make is so easy to recover from an unexpected crash or
misbehaving software install.
Dave
wo2x
No Tim, you are wrong.
Millennium.
What a buggy piece of work that was. I suffered through the beta. MS pushed
that out the door knowing that it was horrible.
Dave
wo2x
--
From: Tim Ellison [EMAIL PROTECTED]
Sent: Tuesday, July 22, 2008 9:33
of the
radio. I also cut the metal on the case (behind the fan to have less
restriction. By mounting on the outside, I can use a thicker fan assembly.
With the fan inside the case, it is too close to the circuit boards and will
cause blockage in air flow which increases noise.
Dave
wo2x
. This did not happen with the
the version prior to 1.12.0. Any suggestions?
Tnx es 73,
Dave N8AG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
I have my SDR-5000 setup using LogMeIn remote free and Skype audio.
This works well for CW, but has anyone set things up for 2-way audio
for the voice modes using Skype? If you have, I would like to hear from you.
Dave, W5UN
___
FlexRadio Systems
range when fully decked out.
73,
Dave N8AG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
YES
Dave, W5UN
At 21:02 6/20/2008, you wrote:
Has anyone observed that RX2 band selection does not seem to work properly
or at all whenever RX1 is set to a VHF+ transverter?
73,
Bill Bailey AE6EQ
___
FlexRadio Systems Mailing List
FlexRadio
of ever having this capability, you Flex
software gurus?
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
When I try to enter a bug report I get the following message: Server
Error in '/' Application Using themed css files requires a header
control on the page. (e.g. head runat=server /).
Anyone know what this is?
Dave, W5UN
___
FlexRadio Systems
, let me say, that the parts I received to install the RX2 board
were missing two items, the two nylon screws, and two nuts for the
standoffs. Luckily I had similar parts in my surplus bin here.
This dual receiver is going to be a joy.
Dave, W5UN
How does one adjust the CW weight when using CWX? Or is this even
possible? Not a problem when I use winkey, but when using the
internal PowerSDR CW generator I cannot find any place to set weighting.
Dave, W5UN
___
FlexRadio Systems Mailing List
I just received the tracking number for my RX2, so it will be here
tomorrow. Now, what do I do for software? Is the PowerSDR version for
the RX2 implementation out?
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
in order to improve visual weak signal detection.
I have come to this conclusion by extensive side-by-side comparisons
of both during actual operating times on 2 meter CW and WSJT.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
Hi Jeff,
I am fully aware of how to change settings of the waterfall. I have
tinkered with that endlessly, trying to make the Flex PowerSDR look
like yours, I cannot do it. Give me a clue.
Dave, W5UN
At 19:43 6/8/2008, you wrote:
Dale is correct - you can change sensitivity via the menues
.
By the way, this started occurring before the latest SVN.
Dave, W5UN
At 23:29 5/13/2008, you wrote:
I thought I was finished with PwrSDR QSK a couple of days ago, but
then I had a few more thoughts...
There is a new version in the SVN branch w2rf\bin\release
My favorite settings are DSP 4096/256
or in the Skimmer setup. Anyone here able to help me?
Adjusting the Audio IF, hz does not get me anywhere. I have Skimmer
configured fpr SoftRock IF mode, of course.
Is there any place on the web where CW Skimmer-PowerSDR setup
parameters can be viewed?
Dave, W5UN
Ed, W2RF, you are on a roll. Keep up the great work. Working mighty
fine here on CW
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
have is to disable the serail and parallel ports
in Device Manager before shutting down, otherwise I get a Stop )x007E BSOD
on boot. Once booted, I have to enable the parallel port in Dev Mgr.
Thanks,
Dave
wo2x
___
FlexRadio Systems Mailing List
A dumb question - sorry
Will both receivers be able to share a single antenna - either a separate
receive or xmit/receive one ?
Thanks
Dave - WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Friday, May 02, 2008 11:37 AM
At the current two and one-half percent interest rate, I am happy to
prepay. If I put that $699 amount aside for three months, it amounts
to a whopping $4.37 additional value. NO BIG DEAL with me.
Dave, W5un
At 20:40 4/30/2008, you wrote:
Alan,
How payments are processed is clearly stated
I had a similar problem on 20m some time back, turned out it was my mike
boom.
Once I grounded it all was good again. It was a Heil boom by the way.
I don't know if it will help you or not.
Dave
Phil LaMarche wrote:
Update:
I grounded the second PS and the problem remained. I then went
-noticed. If SDR-5000 is to
be a serious competitor it must demonstrate equal, or better,
performance in this CW QSK area also, as it does in almost all other areas..
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com
. Perhaps SDR radios, by
their very nature, cannot be expected to match such performance. If
I could obtain the T/R turn around time stated in the quote above,
this problem is solved. But how do I do it?
Dave, W5UN
___
FlexRadio Systems Mailing List
by using N2AMG's
MixW-to-DXLab Gateway, which is available via
http://www.dxlabsuite.com/MixW_Bridge/index.htm
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Dan rooney
Sent: Wednesday, April 23, 2008 8:36 PM
To: flexradio@flex
I stand corrected!
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve Nance
Sent: Wednesday, April 23, 2008 8:49 PM
To: 'Dan rooney'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Sharing CAT
http://k5fr.com/ddutilwiki
transition from T to R is the issue and the shortcoming. If there is
a way to overcome it, I am receptive to learning how. I'll believe it
when I hear it in my QSK operating.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
for additional shippingprice.
My email address is ok in QRZ.
Dave De Coons
WO2X
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
Presonus Firebox is sold. Thanks to all who responded.
Dave
Wo2X
--
For sale - Presonus Firebox with power supply, firewire cable, and
driver
cd.
This has the 96k firmware loaded in.
Perfect for SDR-1000/Delta 44 owners who want
Does anyone here know if there is a utility that will allow the
SDR-IQ frequency to track with SDR-5000?
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
the original thread.
Can anyone provide input on this mod or other fan mods which would quiet down
the fan?
Thanks,
Dave
wo2x
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
Sorry, Steve, it didn't occur to me that negative values would be required;
I'll extend the sliders to support them...
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve Nance
Sent: Wednesday, March 26, 2008 12:28 PM
Re: Oscillator heating element in SDR-1000
Can someone provide the following information concerning the heating element
that is soldered to the top of the oscillator case on the TRX board:
Resistance:
Temperature of the oscillator case after heat up:
Why do I ask?
The
It sounds like it might be RF getting into the Audio input ..
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Art Gartner
Sent: Saturday, March 08, 2008 9:28 AM
To: George Steube; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Tune Power on Flex5000
JIm,
Thanks for the info and explanation. I can see that the fix I tried is NOT a
good idea.
Does anyone know which thernistor was chosen by Flex?
73 de Dave
...living and learning
Visit FAIRTAX.ORG to discover an idea whose time has come
I know I have seen it in writing , but I can't locate the info now.
What is the recommended power output level for the 5000A running in Digital
Modes ?
Thanks
Dave - WA3FDB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
Thanks Tim
-Original Message-
From: Tim Ellison [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 27, 2008 7:17 PM
To: Dave Beumer WA3FDB; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Max power out on Digital modes
You can run full duty cycle digital modes at 100 watts
.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com
(B30M,4)=15745620...000.
Anyone know what this all about? I will call Dudley tomorrow.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
Don
I had to set my Windows XP default soundcard to the virtual cables for
MMTTY to work ..
Check this article http://support.flex-radio.com/Downloads.aspx?id=117
Dave - WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don
Sent: Wednesday
Thanks Ed --
Does CWskimmer have the ability to key the Rig ?
-Original Message-
From: Ed Russell [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 19, 2008 2:58 AM
To: [EMAIL PROTECTED]; FlexRadio List; FireBrick
Subject: Re: [Flexradio] Attn: CW Skimmer testers and users
Dave
/2008 8:26:28 PM, Dave Beumer WA3FDB ([EMAIL PROTECTED]) wrote:
Ed
I set PowerSDR/CWSkimmer as described .. I get the CWSkimmer error
The
specified format is not supported or cannot be translated
Any ideas ?
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Well duh !!! Of course .. I totally spaced that one !!
Color my face red !
Thanks for your patience Ed..
-Original Message-
From: Ed Russell [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 19, 2008 2:41 PM
To: Dave Beumer WA3FDB; flexRadio List
Subject: RE: [Flexradio] Attn: CW
Ditto here -- 3 days after upgrading firmware I had one lockup running
1.1.10 SVN 1979
Running Pentium Q6600 2.4Ghz with 4GB dedicated machine..
Frequency of occurrence has decreased..
Dave WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jerry
used is an RCA male to PL-259 RG-58 cable.
Caution! - If running a Flex 1000, do not edit the tx band data to allow tx
on 8.83 MHz (you shouldn't be doing this anyway). The Flex 5000 firmware
will not allow tx on that frequency.
73
Dave WO2X
Ed
I set PowerSDR/CWSkimmer as described .. I get the CWSkimmer error The
specified format is not supported or cannot be translated
Any ideas ?
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ed Russell
Sent: Monday, February 18, 2008 5:18
I have the SDR-5000. If I press CTRL-SHIFT-P and run tests, is it
normal that several of the tests will fail?
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Just tonight I had a receiver hang-up.. MOX toggle didn't fix it, but
turning the Griffin Powerpro did.
I'm gonna disconnect it for a while and see if hang-ups persist.
PowerSDR 1.10.4 release version firmware 1.1.9, Windows XP pro, Q6600, 4GB,
XFX 680lt mobo
Dave - WA3FDB
-Original
Tim
In my cases toggling PowerSDR off and on did not clear the problem, only a
quick toggle of MOX
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Monday, January 28, 2008 2:14 PM
To: Jeff Anderson; Jerry Harley; FlexRadio
Bill
I had a similar issue with 1.10.4 and MixW, Power cycling (from console) and
restarting MixW seemed to clear things up.
It was not consistant, I could go for an hour with no problems and couldn't
find a way to reproduce it.
Dave WA3FDB
-Original Message-
From: [EMAIL PROTECTED
, that if I listen carefully, and
there is a strong station on the other end replying, I will actually
hear his signal very weakly. I momentarily trip the VOX or PTT and
the receive is back to normal levels.
Dave, W5UN
___
FlexRadio Systems Mailing
Jeff I think you are on to something with the sticking relay. The
question now is: how do we fix it?
Dave, W5UN
At 22:55 1/28/2008, you wrote:
Hmmm...you know what? Every now and again my 5000 displays High
SWR while transmitting (yet I know it's near 1:1 using an external
meter). If I
Steve
I worked the BARTG RTTY contest with the VAC, no latency issues..
occasionally I had to turn VAC off then of again 'cause it just stopped
working - using 5K PowerSDR 1.10.4 with Mix.
Dave WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
I have installed the K6JCA console, and I love the
Panadapter/Waterfall. However, SVN's in the 1900's will not work
correctly with WSJT and VAC, so I cannot use it with WSJT. Is it
possible to make the K6JCA console work with earlier SVN's?
Dave, W5UN
Ed
Wide screens work great on Windows XP, I use a wide screen and get two
programs up at a time.
I use a 22 .
Dave
WA3FDB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edward J White
Sent: Tuesday, January 22, 2008 3:19 PM
To: SDR-1000
Subject
Is anyone here using an HP notebook computer (HP dv6500t to be
specific) with SDR-5000? I think these have the RICOH 1394 adapter,
but I don't know what chipset is used. I just need to know if this
will work OK with the SDR-5000.
Dave, W5UN
I cannot get VAC audio from WSJT to the radio with recent SVN
versions. Has anyone else seen this problem,
SVN 1836 and earlier work fine here.
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
I should have added, VAC gets audio from the radio to WSJT OK. It
just does not give audio from WSJT to the radio.
I cannot get VAC audio from WSJT to the radio with recent SVN
versions. Has anyone else seen this problem,
SVN 1836 and earlier work fine here.
Dave, W5UN
this?
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/ Homepage
This problem I describe in Bug Report #1525 really got me in trouble.
I hope it is addressed soon
Dave, W5UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
Thanks John
-Original Message-
From: John P Basilotto W5GI [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 02, 2008 2:37 PM
To: 'Dave Beumer WA3FDB'; 'Gerald Youngblood'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Holiday schedule
Dave, I will release a update tomorrow
Gerald
Where do things stand regarding the Units that were scheduled to ship by
12/28 ?
Thanks
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gerald Youngblood
Sent: Saturday, December 29, 2007 11:30 AM
To: flexradio@flex-radio.biz
Subject
I'm in the same boat as Paul and would also appreciate aa more frequent
progress update.
Dave (SO 1330)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, December 27, 2007 11:14 PM
To: flexradio@flex-radio.biz
Subject
I see all the chatter. Is there a version of PowerSDR that will run
under LINUX (particularly, Ubuntu)?
Dave, W5UN
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
These are BC band harmonics. I too, would welcome a notch filter, and
a spot button for CW
Merry Christmas Happy New Year
Dave, W5UN
At 22:33 12/25/2007, you wrote:
I've got a birdy, dead on 1.820 which is a common DX frequency.
Can't Notch it out with ANF.
Probably a video card birdy
to run Power SDR I get Error in communicating with Driver !
Thanks in advance,
Dave Anderson, K4SV
Tryon, NC
828 777-5088
www.K4SV.com
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Hopefully someone with both Commander and an SDR-5000 will step up to help
you, Zack. If not, let me know and I'll do my best under the circumstances
(my SDR-1000 is in the closet).
73,
Dave, AA6YQ (author, Commander)
-Original Message-
From: [EMAIL PROTECTED]
[mailto
I have found that whenever I change sampling rates in PowerSDR and
the SDR-5000 Control Panel, I must totally exit PowerSDR and restart.
Otherwise, my transmit frequency moves to the lower image frequency.
Dave, W5UN
___
FlexRadio mailing list
with 1.1.8
firmware and SVN1836.
Dave, W5UN
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio
Bill
Do you know the specific model for the Heil adaptor.
As I read their catalog, the Yaesu adaptor is yellow and there are several
flavors.
Heil claims it will work with Flex equipment, but don't include it in their
chart.
http://www.heilsound.com/amateur/adapters/
Thanks
Dave
WA3FDB
loaded SVN1825 and rx noise floor was showing 40 over S9 on 75 meters where it
actaully is around s6.
Also more importantly, tx audio was VERY high, driving power out on SSB to
almost 200 watts!
Reverted back to SVN1818 for now,.
Dave WO2X
-- next part --
An HTML
Thanks Ray
-Original Message-
From: K9DUR [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 12, 2007 9:49 PM
To: 'Dave Beumer WA3FDB'; 'FireBrick'; 'FlexRadio List'
Subject: RE: [Flexradio] Heil ProSet
Dave,
There are 2 Heil adapter cables for Yaesu radios: AD-1Y (8-pin round
John, if you're having a problem with WinWarbler freezing up, I would like
to pursue it. Please describe the circumstances under which this occurs.
Thanks!
73,
Dave, AA6YQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Sweeney
Sent: Sunday
the CW
while keeping the 25 and 50 hz filter band pass skirts reasonably sharp.
A like to see on my wish list is a spotting button on the PowerSDR
that would allow me to check my transmit tone without actually transmitting.
Dave, W5UN
___
FlexRadio
am
overlooking something in the settings? Anyone have any info or
experience with this problem?
Dave, W5UN
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http
for direct keying in order to unburdon the
computer a bit. My CPU runs at about 3.5 to 5 %.
Dave, W5UN
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail
I noticed 0.1.1.6 firmware for Flex 5000. Any indications on what has been
changed?
Thanks,
Dave WO2X
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071130/62312e11/attachment.html
601 - 700 of 852 matches
Mail list logo