es 73
dan
k0dan
-Original Message- From: Kevin Feeney
Sent: July 20, 2014 21:13
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Possible to run PSDR on a tablet for use with
aFlex-1500
I've run it on an ASUS T100 which can be a netbook or tablet, but I
haven't found a way to get
I've run it on an ASUS T100 which can be a netbook or tablet, but I
haven't found a way to get it to load the drivers and keep them. You
have to go through a multistep, arcane process involving two reboots to
get Windows 8.1 to allow unsigned drivers, and that works but as soon as
you shut
Was just having a nice chat on 40 meters when in the middle of a
transmission PowerSDR crashed with some sort of error.
Closed it and tried to restart it, no joy. Rebooted the computer. No joy.
The power LED on the F5K is not on, or won't come on when the button
is cycled. There is power to
Drax and Brian,
I removed power early on in the process and let it sit for a moment,
and then again for a half hour. Just grabbed my inline power meter and
confirmed power at the radio cable but zero current flowing. Flexed
the front power button a number of times including tugging on it in
On 4/27/2011 3:44 PM, David Bridgham wrote:
On 04/27/2011 03:43 PM, Gary Warner wrote:
Then my headset must really be special, since it has two plugs, one of
which is the 4 ring .206 connector, and the other which is a
headphone connector.
You have exceeded my knowledge of aviation headsets.
On 4/27/2011 5:13 PM, Michael Tondee wrote:
I use what is basically the shell of a D-104 with a Heil HC-5
element. I've altered the wiring over the years to work with
different rigs and just recently cut one end of a CAT5 cable and
wired it into the terminal strip on the inside bottom of the
On 3/31/2011 7:39 AM, Robert Delaney wrote:
I installed 2.0.22 and now everything sounds good signals are
great on HF but after I select one of my transverter buttons and
come back all HF RX is lost.
Not even WWV until I power down the radio and then turn it back
on. Restarting the
Along with some of the other posters, I was running an XV-144 2 meter
transverter for the contest on the weekend. Mine was running with my
5000a, Windows XP SP3, PowerSDR 2.0.16. It ran pretty well, but I had
a couple of issues.
The first was that I don't seem to be getting full output out
Trying for a last minute integration of an Elecraft XV-144 2 meter
transverter to my Flex 5000 in time for tomorrow's contest. I've got
it basically plumbed together but it seems a bit deaf, and I can't get
enough drive to get more than 5 watts out of the transverter. I'm sure
some folks have
Recently upgraded to a Flex 5K and trying to set up for digital work.
Purchased VAC and did the setup according to a couple of write ups for
using it with FLDIGI and others. I'm not having very good results.
FLDIGI doesn't decode even strong clear signals very well, a few letters
here and
I hadn't used the SDR1000 since I got my F1500, but fired it up
today and appear to have the same problem.
Oh good,(well, sorta, for me) I was afraid I was the only one. Kinda
quiet on this topic till you commented.
To me, this sort of feels like a problem with the Local Oscillator,
like
Hi,
I joined the ranks with an SDR-1000 last winter and was happily
running 1.18.6 for months. Then summer came and I got involved in my
summer activities and didn't run the system for a few months. As I'm
moving back into winter mode, and firing up the shack again, I find my
flex doesn't
12 matches
Mail list logo
