the same thing for an Ethernet to Serial adapter on a device I had built.
I suffered a voltage spike across the LAN that not only damaged my Ethernet
adapter, but also damaged the MAX232 on one of the boards that was connected
to it.
73,
Mike
W5CUL
-Original Message-
From: FlexRadio
. It's
possible to produce very clean and beautifully balanced audio with the
Flex and as long as the gain is set correctly at each stage, it should
sound smooth and natural.
---
73,
Mike
W5CUL
___
FlexRadio Systems
. I am
using a Logitech Z5500 Speaker System that is connected to the PC. I have
some ferrites connected to the Control Head cable at its ingress into the
Amplifier with no RFI issues. You should hear the Flex in simulated
surround sound ;-)
73,
Mike
W5CUL
-Original Message-
From
Rick,
To key the SDR-1000 using a PTT switch, use Pin 11 (All mode key) and Pin 15
(ground) connected to the foot switch. To have the SDR key an amp at the
same time, use Pin 7 to Pin 15(ground) connected to the amp keying relay.
Hope this helps.
73,
Mike
W5CUL
-Original Message
ratio
for 60hz. Anything around 90db or better should keep the hum out.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Saturday, September 04, 2010 8:39 PM
To: Michael Tondee
Cc: flexradio
in this state. He
must have passed out due to dehydration. Probably should have taken the
proposed advice; sitting in a comfy air conditioned environment playing on
the Flex during the heat of the day. Which is pretty much from when the sun
comes out, till it goes down ;-)
Mike
W5CUL
-Original Message
Have you checked to see what the Headphone Output slider is set for within
the Mixer tab?
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jon Maguire
Sent: Wednesday, May 05, 2010 8:55 PM
To: Flex-radio
ATCHDescription=hp+mediasmart+server
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of pierce day
Sent: Wednesday, February 17, 2010 1:47 PM
To: Flex
Subject: [Flexradio] Acronis Online Backup
I'm
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of dan edwards
Sent: Saturday, January 23, 2010 10:11 AM
To: flex list
Subject: [Flexradio] another dumb question...
If i put my emu 1212 m sound card back in, to play
using
the DC PS; difference of potentials in ground plane vs signal ground.
Although the Flex may already share that signal ground plane via the
firewire cable.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf
, you can specifically deselect it on all your
hard drives as well. Go to My Computer, highlight a hard drive, right hand
mouse click it, select properties, then uncheck the Allow Indexing
Service... box at the bottom of the properties screen. Repeat for each hard
drive.
Regards,
Mike
W5CUL
MB EMI shield due to one side cover having a plastic window, but I
have not detected any such issues thus far.
Regards,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of n3evl
Sent: Sunday, October 18, 2009 3:56 PM
Maybe not knobs, but find or develop another app to assign functions to the
3 buttons on the iphone, that might work ;-)
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of FireBrick
Sent: Saturday, October 17, 2009
software, but is also used for work, family business, and the
occasional network game with my sons. It can be done, but then again, that
is my personal preference, not a requirement.
Regards,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun
.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of paul
Sent: Monday, August 17, 2009 5:45 PM
To: Tim Ellison; n4b...@gmail.com
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] [SPAM] Re: [SPAM] Level
in
the long run.
I use a two port RS-232 to USB adapter made by SIIG, and it works great.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steve Floyd
Sent: Friday, July 03, 2009 5:58 PM
To: Flex Radio
Subject
I am using a Netgear WNR-3500 which is capable of 802.11N. There was no
discernable increase in my noise floor when the unit was powered up and the
WAP was turned on. Hope this helps.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun
Finally, someone who took the time to perform due diligence in their
research/verification regarding ESSB. Good job Brian!!
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Brian C
Sent: Tuesday, May 12
I feel like I just received 11 new radio's with out having to buy any new
hardware ;-) Excellent job, and thank you!!
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Jerzycke
Sent: Tuesday, May 12, 2009 10
audio sound file yourself for play back. Just a thought.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Barber
Sent: Friday, May 08, 2009 4:16 PM
To: Ray Andrews
Cc: 'FLEX USERS'
Subject: Re: [Flexradio
Can someone provide me a hyper-link to an fcc.gov webpage that specifically
provides this new ruling, or even send me a PDF copy of this new ruling? I
have looked all over the place, and the last official RO for part 97 that I
found was dated October 4, 2006.
73,
Mike
W5CUL
-Original
my 5000A
with it at this time, but was planning to do so in the near future. Please
keep the forum informed on your progress as it does seem that Windows 7 may
become a viable upgrade, as opposed to Vista.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
Hahahahaha...Smoking card in hand ;-) Now that is a good one!!
Enjoy your new radio when it arrives!!!
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven O'Neal
Sent: Wednesday, April 29, 2009 10:33 PM
to hear how many are using the Beta OS in conjunction with
PowerSDR, and what the overall performance level is as compared to XP, Vista
not withstanding.
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent
Art,
Specifically, what brand of power supply is installed? I only allow Antec
PC Power Supplies in this house, as they seem to have excellent EMI/RFI
suppression.
73,
Mike
W5CUL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz
a peculiar
trouble. Keep the system configuration information flowing, and we may see
pattern emerge.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Larry W8ER
Sent: Saturday, September 20, 2008 4:22 PM
To: Gary Carter
Cc: flexradio@flex
installation of .NET. Since I will be doing a complete overhaul on v1.1 of
.NET I thought it might be worthwhile to upgrade to a newer version, as long
as PowerSDR is compatible with that.
Thank you in advance.
73,
Mike
W5CUL
___
FlexRadio
on the
machine.
73,
Mike
W5CUL
-Original Message-
From: Jim R [mailto:[EMAIL PROTECTED]
Sent: Friday, September 19, 2008 12:19 AM
To: W5CUL; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Microsoft .NET and PowerSDR
Mike
I know Dudley answered but as fellow laymen, I understand what
drivers, as it seems Microsoft ships each edition with both versions, and
the CPU manufacturer should honor that.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Redmon
Sent: Friday, July 18, 2008 5:47 PM
To: flexradio@flex-radio.biz
drop along the DC power chain
starting with the power supply, a larger drop seen across the OEM supplied
power cable, and another large drop where the built in voltage meter system
in the 5000A is taking its reading.
Thank you,
Mike
W5CUL
-Original Message-
From: Gerald Youngblood
My second set of measurements was at the power supply itself. The third set
is right where the OEM cable/plug meets the radio.
Thank you,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ray J
Sent: Thursday, July 10, 2008 10:33 PM
to tackle
tonight. If no one else tries that test by COB tomorrow, maybe I can borrow
a variable power supply out of the lab over the weekend.
Thank you,
Mike
W5CUL
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2008 10:24 PM
To: W5CUL
Cc: [EMAIL
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Neal Campbell
Sent: Friday, July 04, 2008 10:50 PM
To: Edwin Marzan
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] SO2R out of the box once we had the RX2
The radio I probably kept the longest
, adjusting the
low end of the filter dependent upon who you are conversing with.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Harry Williams
Sent: Monday, June 30, 2008 11:01 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] More bass
,
select the Transmit tab, and click on the save button right below the
Profiles name display. This should save all settings for that particular
Transmit Profile.
Hope this helps.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Cleve
Sent
meters set to just plain
Signal. Has anyone else seen that, or is it just my rig?
Thank you,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Saturday, June 21, 2008 5:27 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] rx1/rx2
Well said2 years running, and it just keeps getting better.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edwin Marzan
Sent: Sunday, June 15, 2008 11:40 PM
To: richard allen; flexradio@flex-radio.biz
Subject: [Flexradio] The old
are
exceptional, and do not need any help in sustaining that stature. So why
not provide ALC in the mix and let the owner choose whether to use it at
all, use it wisely, or just get plain crazy with it? Just my two
centsfeel free to chime in.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL
the
5000 and the linear? Another idea would be to bypass the linear and go
straight into either your second SWR meter or the ATU and see what happens
there. Let us know.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of david
Sent: Sunday
to ensure that there are no more problems.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan NV8A
Sent: Sunday, April 27, 2008 12:50 PM
To: FlexRadio Reflector
Subject: Re: [Flexradio] Windows XP, Norton Internet Security, and the Flex
for one am not ready to be SVN free.
Thank you for all the work that all of you do to make this a radio that just
keeps on getting better
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Friday, February 29, 2008
and
running, turn on VAC in PowerSDR. You should see the SR value for each
cable go from blank to 48000, indicating a connection.
Hope this helps.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of NU8Z
Sent: Saturday, January 19, 2008 7:07 PM
no RFI
issues at all, even on 75M. However, keep in mind that every
station/installation is different in one way or another.
73,
Mike
W5CUL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
I will add to that vote. The backlit meter gave the whole ensemble some
serious style.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike King - KM0T
Sent: Sunday, January 06, 2008 8:26 PM
To: Jeff Anderson; John Sweeney
Cc: flexradio
Tim,
Crack Pipegood one...as it is the instrument of choice that delivers
the addicting drug...PowerSDR ;)
Merry Christmas to all!!
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Monday, December 24, 2007 8:45 AM
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Doug McCann
Sent: Saturday, November 24, 2007 3:44 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Mute Button Not Working
I am using SVN 1756 and the MUT is not working.
It clicks, but stays
it.
73,
Mike
W5CUL
_
From: Dudley Hurry [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 23, 2007 12:06 PM
To: Mike Schlamp; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Computer Question
Mike,
I have run the 5K on a P4, 2.0 Ghz, with 512mb of memory with no problem at
96K
Glenn,
I would say that since you would be using Remote Desktop which only displays
and lets you interact with a graphical representation of your remotely
connected computer's desktop, then the computer that is physically connected
to the 5000A needs the horsepower.
73,
Mike
W5CUL
Boy, am I glad I read your reply before I called the clinic ;)
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Tracy
Sent: Friday, October 19, 2007 3:12 PM
To: N3WT; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Good news...
Never
is on a Flex, and can
easily adjust their transmit bandwidth on the fly.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Maarten
Sent: Wednesday, October 17, 2007 10:02 PM
To: FlexRadio Reflector
Subject: Re: [Flexradio] New Bandplan effective
I saw the same thing last night using SVN 1652. Unfortunately I did not
bother to troubleshoot it (rebuild a database from scratch), just fired up
v1.10.1 and drove on.
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of José Dumoulin
Sent
Hi, My name is Mike, and I am an SVN-aholic.
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Richard Bischoff
Sent: Tuesday, September 04, 2007 7:15 PM
To: 'Tim Ellison'; 'Stig LA4WAA Rasmussen'; flexradio@flex-radio.biz
Subject: Re: [Flexradio
Oooops, wrong reflector, I was looking for the support Group ;)
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of W5CUL
Sent: Tuesday, September 04, 2007 10:48 PM
To: 'Richard Bischoff'; 'Tim Ellison'; 'Stig LA4WAA Rasmussen';
flexradio@flex
How about this; make a new tab in the setup menu called Mouse. Within
that tab could be selectable functions per wheel movement, and Left mouse
clicks. The default could be what they do today (tune pull down menu).
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Come on now, you got my hopes up pretty high when I saw that selection. And
then in one swift moment brought me back down to reality; I expected to see
100 sliders ;) Hahahahahaha...that was a good one Eric!!!
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
you,
Mike
W5CUL
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070703/7d1b4ebd/attachment.html
___
FlexRadio mailing list
FlexRadio@flex
I see in the log for Rev 1311 where the SDR-X files were added to the trunk.
So I take it the branch is no longer valid?
Thank you,
Mike
W5CUL
_
From: W5CUL [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 03, 2007 7:11 PM
To: 'FlexRadio@flex-radio.biz'
Subject: SVN X Trouble
Doooh...Mr. Youngblood's email explaining all of this was just found in my
Bulk Email folder. Sorry for the spam!
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of W5CUL
Sent: Tuesday, July 03, 2007 7:15 PM
To: FlexRadio@flex-radio.biz
I am using two Rosewill R912E 19 Flat Panels. The Firebox unit is right
underneath the two and the SDR-1000 is about 10 to the left of the two
panels and I have no EMI or RFI issues. The setup can be seen on QRZ.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
software package, then they would select VAC along with the second option
that would allow the mic audio to pass on to the transmitter. I think such
an option might address all operating situations. Just my two cents.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto
and played them back, I occasionally get comments on how quite
the band must be at my QTH ;)
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee A Crocker
Sent: Sunday, May 20, 2007 5:42 AM
To: Tim Ellison; Flexradio
Subject: Re: [Flexradio] AGC
. It is just a
matter of toggling the VAC button when you want to speak. But still, it
would be cool to not have to do that, if so selected.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Wednesday, May 16, 2007 7:52 AM
To: KQ8RP
. Good luck with
your project.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Denson
Sent: Tuesday, May 01, 2007 6:13 PM
To: FlexRadio Reflector
Subject: [Flexradio] New Computer Power Supply
I am building a new desktop computer
All,
I am sorry it has taken me so long to get back with all of you. I have been
busy fighting fires and spreading level headed logic.
Thank you to all for responding to my query! I have a much better
understanding of page faults; both hard and soft.
73,
Mike
W5CUL
-Original Message
for PowerSDR.exe to use when running?
Thank you,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Lux
Sent: Sunday, March 25, 2007 5:40 PM
To: Ignacio Cembreros; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Help!
At 01:25 PM 3/25/2007
that functionality in
the future.
73,
Mike
W5CUL
-Original Message-
From: Robert McGwier [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 18, 2007 9:49 AM
To: W5CUL
Cc: 'Mark Mumaw'
Subject: Re: [Flexradio] HELP RTTY without VAC!!!
W5CUL wrote:
Mark,
Now that is an idea with all kinds of benefits
operations. I would suggest providing a detailed write up and post
it as a Feature Request. You never know, it could show up in an SVN
download, or maybe as a feature within an RTTY menu subset in a whole new
software release.
73,
Mike
W5CUL
-Original Message-
From: Mark Mumaw [mailto
this helps.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frank Mayer
Sent: Tuesday, January 16, 2007 6:48 AM
To: [EMAIL PROTECTED]; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Tune Up Power Output SVN 827
I don't believe that 10
. Now if I
can just get the coffee pot to crank out the goods a little faster.
Good luck on the troubleshooting!!
Mike
W5CUL
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Present. Merry Christmas and a Happy New Year to all.
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Thursday, December 21, 2006 3:23 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] PowerSDR v1.8.0 Released -- Dual
. As the thermistor
heats up to a different temperature than before, this will throw off the
first calibration. I have taken up the practice of calibrating my SDR-1000
to WWV during each use, giving it about 20 minutes to stabilize prior to
performing the procedure.
Mike
W5CUL
-Original Message-
From
Scott,
Yes, that should work for every mode minus CW. I use 11 15, which includes
CW.
73,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott
Sent: Saturday, September 16, 2006 8:06 AM
To: Flex Group
Subject: [Flexradio] Foot Switch
is not prevalent in V1.6.1 or V1.6.2, but the loud pop when transitioning
from transmit to receive is.
Thank you,
Mike
W5CUL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Roland ETIENNE
Sent: Sunday, September 10, 2006 6:29 AM
To: [EMAIL PROTECTED
to
receive in V1.6.1 V1.6.2, could the same damaging results be encountered
with these loads as well?
Thank you,
Mike
W5CUL
-Original Message-
From: Robert McGwier [mailto:[EMAIL PROTECTED]
Sent: Sunday, September 10, 2006 3:08 PM
To: W5CUL
Cc: flexradio@flex-radio.biz
Subject: Re
74 matches
Mail list logo
