this set of boards.
--
Wallace Watson [EMAIL PROTECTED]
WA4ZAZ - Frankfurt, Germany
--
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
HI Paul,
The following speakers are the best I have ever run into for use with the
SDR-1000. They are not susceptible to RFI like most other speakers for the
computer that use an external wall-wart power supply. These use a built in
120V 50-60Hz power supply.
http://www.alteclansing.com/produ
A-and-ATU_W0QQitemZ120120818013QQihZ002QQcategoryZ4674QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
[]
Thanks, Wally - M0ZAZ.
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
-- next part --
An HTML attachment was scrubbed...
URL:
-1000 owners who might be interested but did not order in
the past may let me know and I will accumulate a list, and if enough
interest is generated I will satisfy those potential orders at a future date.
Thanks to all those that ordered PMUCB's.
--------
o@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Knowledge Base: http://kb.flex-radio.com/
>FlexRadio Homepage: http://www.flex-radio.com/
-
www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Knowledge Base: http://kb.flex-radio.com/
>FlexRadio Homepage: http://www.flex-radio.com/
--
Greetings Flex'ers,
I have a quantity of Poor Man's UCB's available for
purchase. Please let me know if you have an interest in obtaining an
assembled board, a complete kit of parts, or a bare printed circuit board?
I will ship you an assembled board for a total of $19.00 plus $1.50
ship
1.50 to $1.80.
When placing your order via email, please supply your HAM Call (if
applicable), Name, Address and quantity of assembled or bare-boards desired.
73's, Wally - M0ZAZ
----------
Wallace Watson [EMAIL PROTECTED]
Croug
; >
> > FlexRadio Knowledge Base: http://kb.flex-radio.com/
> >
> >
> >
>
>
>___
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_f
>receipt.
>
>This message should not be copied or used for any purpose other than
>intended, nor should it be disclosed to any other person.
>
>***********
>
>
--
Wallace Watson
the PMUCB assembled is $18.00US + shipping. I will advise as
to the shipping amount when I mail your unit to South Africa.
If remitting payment via PayPal (my preferred), my email address:
[EMAIL PROTECTED]
If you opt for payment via cheque, my mailing address in the UK:
Wallace Watson
RAF Croughto
x27;s, Wally - M0ZAZ.
----------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
-- next part --
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20061029/1ea7
email: [EMAIL PROTECTED], pricing for these units is $18.00US or
equivalent in Euro or British Pounds Sterling.
Available on HAMSDR is a picture of the completed
PMUCB: http://www.hamsdr.com/personaldirectory.aspx?id=443
73's, Wally - M0ZAZ
----
___
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Homepage: http://www.fle
achment.html
>
>
>___
>FlexRadio mailing list
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-a
/mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>FlexRadio Homepage: http://www.flex-radio.com
--
W
[EMAIL PROTECTED]>
>X-Sender: [EMAIL PROTECTED]
>Disposition-Notification-To: <[EMAIL PROTECTED]>
>X-Mailer: QUALCOMM Windows Eudora Version 5.2.0.9
>Date: Sat, 08 Jul 2006 07:56:20 +0100
>To: [EMAIL PROTECTED]
>From: Wallace Watson <[EMAIL PROTECTED]>
&
dio Homepage: http://www.flex-radio.com
------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
HI All,
What the heck, I am in via PayPal for $30
Wally, M0ZAZ
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
___
FlexRadio
://www.flex-radio.com
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
---
Folks,
The three emails just received within the last few minutes with "price" as
the subject are virus infected.
Please delete from the reflector and from individual users email.
73's, Wally - M0ZAZ
------
Wallace Watson [
Threat name
jmhwgdw.exe [EMAIL PROTECTED]
Wally - M0ZAZ
----------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
me with suggestions to help provide a solution for my issue.
Have a great New Year!
73's, Wally - M0ZAZ.
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
xRadio Systems
-Original Message-
From: Wallace Watson [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 31, 2005 4:01 AM
To: Eric Wachsmann - FlexRadio
Cc: ecellison; FlexRadio@flex-radio.biz
Subject:
Grettings Eric,
As you know Eric Ellison and I are working on a kit for the Poor Man'
Eric but I am using x2-12 to mute my
SDR1000. It was put into Preview 8. You must however go to the options
screen and enable it by checking the box.
-- Larry W8ER
- Original Message - From: "Wallace Watson" <[EMAIL PROTECTED]>
To: "Eric Wachsmann - FlexRadio
ly - M0ZAZ.
------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
Greetings Richard,
If you have the ATU installed and selected from the PowerSDR setup
screen, you loose the SWR selection in the pull-down menu when in TX and
bypass TUN modes. I believe the logic behind this is that the ATU
is not looking to minimize the apparent SWR but to provide a approximat
HI All,
Looks excellent. Stupid question for you but, where you are doing
the monitoring with the O'scope?
I would presume at the LINE IN jack going into the SDR radio, advise
incorrect.
Thanks, Wally - M0ZAZ.
At 08:40 AM 12/19/2005 -0500, [EMAIL PROTECTED] wrote:
Good Work
Eric!
__
stalled on
your computer.
73's, Wally - M0ZAZ
At 11:52 PM 12/15/2005 -0600, Larry Loen wrote:
Wallace Watson wrote:
HI All,
To build on a previous suggestion by Eric1 that we add an external mute
control line with X2-12, and that this mute will sequence the SDR
software to mute the aud
HI All,
To build on a previous suggestion by Eric1 that we add an external mute
control line with X2-12, and that this mute will sequence the SDR software
to mute the audio, protect the AGC and toggle the X2-7 exernal relay line,
if enabled from the PowerSDR console, the exception would be to
David,
Make absolutely sure that you have connected the SDR cabling to the Delta
44 sound card as advised in the Delta 44 Quick Start Guide available from
the
www.flex-radio.com/Download
website page.
The bulk of that information is included below:
Cabling Diagram
Note that the microphone can be
Greetings Christoph,
I also experienced the problem you have described when I obtained my
SDR-ATU and installed it in the SDR-1000 in May 2005. My version of the
ATU did not contain the red and green LED's which indicate the status of
the ATU. After several exchanges with Gerald Youngblood,
David,
I would be suspicious of the output voltage from the line-out from your
sound card. I would recommend that you use the calibration routine for
determining the line-out voltage, thus with the M-Audio Delta 44 sound
card and utilizing the recommended settings for the card you should obse
John,
I found the SDR-ATU to be a very easy installation. Here is a link to the
instructions
from the Flex-radio Website - download page.
http://flex-radio.com/Download/Hardware%20Documentation/ATU%20Kit%20Instructions%20v1.2.pdf
The only caution that I can offer is that when I cut the wire ju
nt or tackle the design or parts for this board? Let's
> kick it around a little!
>
>
>
> Eric - AA4SW
>
>
>
>
>
>
>
>
>
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - England
--
Beppe,
I am game for an SDR EuroNET contact on 80M SSB.
Please suggest the date and time, any evening this week or preferably the
weekend.
Thanks, Wally - M0ZAZ.
At 10:43 AM 8/24/2005 +0200, you wrote:
Hello Euro-SDXER,
How many FLEXer we are ?
We can try to make a NET for test on 80/SSB even
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
nnot get MixW or HRD to
talk to v1.3.13
but it continues to work just fine with v1.3.5.
I am open to suggestions on getting this to work?
Thanks, Wally - M0ZAZ
------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
tinfo/flexradio_flex-radio.biz
----------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
d.
73's
Bob
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
----------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
nstallation?
Thanks, Wally (M0ZAZ).
----------
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
Brian,
Here is the Teamspeak server IP, port addressess and password:
Server Address: 70.84.228.202:9274
Password: Flex4U - (Case Sensitive)
73's from Dayton,
Wally
At 02:33 AM 5/22/2005 +, Brian wrote:
Loaded up Teamspeak. What's the password?
Brian
N5BA
__
Folks,
Hello to all. I had similar thoughts. Now is the time to change it if we ever
will. I am certainly willing to respond a second time.
73's, Wally
WA4ZAZ/M0ZAZ
--
Wallace Watson [EMAIL PROTECTED]
Croughton RAF Base - United Kindgom
--
45 matches
Mail list logo