So we are better off with a fast, single processor CPU than a bit slower
multiple one for the SDR apps if we are going to limit to one?
N0UU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I saw Ray Petit demonstrate CCW at one of the Washington State Hamfests
about 1971. Was on the mailing list and built one of the keyers, but due
to startup medical practice demands, never got on the air before interest
went away. Ray is gone now, but I discussed with him at Dayton one year
of
I gave a talk at CSVHF some years ago on Stochastic Resonance. Strictly
prepared from reading about something I found interesting and not from any
real experience or knowledge of the subject formally. At the same time,
in Vienna happened to meet someone working on speech compression, etc. on
the
While I'm getting a round tuit for that...I decided to try some things
to decrease the load on the XP. The one thing that really helped was
just going from 192K to 96K. It cut the CPU load almost in half.
As graduate economics major before I went into medicine: OTOH, (supposed
to be a
For hams building their own equipment, there's no real requirement to
prevent out of band transmissions by automatic means.
Different post
Interestingly, hams just have to use good engineering practice, and
aren't required to demonstrate compliance, so, while it's nice to
have test
From: Joel Harrison [EMAIL PROTECTED]
I have about come to the conclusion that my computers just aren't meaty
enough to run 192 KHz with the Edirol, as you note. Sadly, Flex-radio says
absolutely nothing about minimum system requirements on the web page.
This is now the second time I've
Posted the HPSDR note here, sorry. N0UU
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge
Be sure to archive the discussion for us lurkers. I suspect that Linux
will be more and more important for both Flex and the HPSDR groups in the
future as Vista slows the whole system and XP becomes unsupported. Some
sporterized OS would really be of future value. Thanks,
N0UU
For those who missed them last time: Electronic Goldmine
www.goldmine-elec.com
is having a close out sale on plastic DIP signal switching relays, Fujitsu
UM1-12W-K. Their cat. # G14599 at 2/$.99
1.1 SWR to 1 GHz or so at about a watt. Probably great for 2M IF
switching, etc. or a
Go to www.hpshopping.com and check out QS-265E. Only a AMD Sempron and 256
MB memory, but at least something that works with a good OS. A marginal
system and you get a CRT monitor, but you get what you pay for.
N0UU
___
FlexRadio mailing list
I've been a RSGB member since the 70s so that I get first crack at Hawker's
TechTopics. If you haven't noticed, RadCom has made a huge format change
and is becoming the technical magazine that Ham Radio was. The last few
months are more than a quick read.
The May 2006 version has a great
Not sure how Ham Radio Deluxe does it, but you just enter the offset for
whatever frequency you dial to (after setting up the offset bands) and then
whenever you tune to that frequency, it applies that offset. So you can
use one of the various signal sources to find the error for that band, a
An outboard 5 v power supply
Not sure about this. I got one from him some time ago and the project
inertia here is in full force, but I think this is a 3.3 v. device. No
specs on the WEB that I can find, but the pinout is not that of the 160.
Great device either way and easily locked to
13 matches
Mail list logo
