As I stated in my message this just started and I did go back to 0.1.1.3
as I stated , with no change and have rebooted and used latest svn and
std 1.10.3 pwrsdr all with no change . Its a pretty dead receiver and
xmit Duffy One day it worked next day it's dead
Duffy,
Have you tried starting with a fresh database? I'd suggest that you try
firmware 0.1.1.4, and rename your current database to something else so
that PowerSDR doesn't see it and creates a new one.
73,
Dale
WA8SRA
Duffy wrote:
My 5000A stopped working last night after working the
My 5000A stopped working last night after working the previous night.
Steve I also have been experiencing the receive lockup a few times
(ssb)and receiver seemed to return after I pushed the PTT again.This
started after I loaded firmware 0.1.1.4 Wed to fix the non operating
with my heil mic
: [Flexradio] 5000A Stopped working ,no receive or xmit now
My 5000A stopped working last night after working the previous night.
Steve I also have been experiencing the receive lockup a few times
(ssb)and receiver seemed to return after I pushed the PTT again.This
started after I loaded
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Duffy
Sent: Friday, November 16, 2007 11:18 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] 5000A Stopped working ,no receive or xmit now
My 5000A stopped working last night after working the previous night.
Steve
Just reloaded 0.1.1.4 firmware and started pwrsdr 1.10.3 creating new
database and still have dead rec with oscillation on panadaptor when
antenna is connected. The radio clicks and responds with band changes
etc. There is noisy grass at bottom of screen with no antenna. Connect
antenna and it
Well it's official. Hardware failure of something near ADC circuits in
IQ area. After running internal tests with Eric a part is gone dead
after 1 week of light use. Radio being sent back for getting repair.
Duffy NA6MM
___
FlexRadio mailing list
7 matches
Mail list logo