At 11:15 AM 9/21/2006, Eric Wachsmann wrote:
>I have swept through the entire 192kHz both in panadapter mode (11kHz IF)
>and in SPEC mode (0Hz IF) and there is no aliasing visible like the FireBox
>pre firmware upgrade if that is what you're asking.
But what's the rolloff of the roofing/anti-alias
exradio] Edirol FA-66 Firewire with 192 KHz
> samplingrateaddedto list of supported sound cards
>
> At 10:52 AM 9/21/2006, Eric Wachsmann wrote:
> >The signal strength is accurate even at the edges (or at least, very
> close
> >to it...perhaps a slight roll-off). But more
At 10:52 AM 9/21/2006, Eric Wachsmann wrote:
>The signal strength is accurate even at the edges (or at least, very close
>to it...perhaps a slight roll-off). But more importantly, you will not be
>able to see very weak signals that because of the elevated noise floor (i.e.
>the humps). The screens
erent
than any other card.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Guy Atkins
> Sent: Thursday, September 21, 2006 12:03 PM
> To: flexradio@flex-radio.biz
> Subject: Re: [Flexrad
OK,
MME is what I need, thanks very much.
Simon Brown
---
RSGB HF Convention October 2006: http://www.rsgb-hfc.org.uk/
- Original Message -
From: "Eric Wachsmann" <[EMAIL PROTECTED]>
> It ships with MME and DirectSound drivers if that is what you are asking.
> I
> don't think it has
Brown (HB9DRV)
> Sent: Thursday, September 21, 2006 11:46 AM
> To: Guy Atkins; flexradio@flex-radio.biz
> Subject: Re: [Flexradio] Edirol FA-66 Firewire with 192 KHz
> samplingrateaddedto list of supported sound cards
>
> And can it be used as a 'regular' Windows soundc
6 matches
Mail list logo