Can someone please tell me is there meant to be settings options available
under Setup / PA Settings as mine is blank ?
Regards,
Craig
VK0JJJ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
That tab is for the SDR-1000
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com http://www.flexradio.com
logo
On
I set my PSDR to Id As TS-2000 but I notice it does not hold this setting
when my Station Master stops working and I check the CAT Control tab in
Setup, the parameter has changed back to PowerSDR
Paul Delaney - K6HR
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
That setting really doesn't do anything anymore. It is a legacy option
from the SDR-1000 days.
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com
Anybody got any screen shots on the setup of VCOM I have V ports set up I
believe ok. What I can NOT get to work is the DDUtil V.2.29 I need to know
what has to be setup under ports? A screen shot would be nice. I had before
and lost it I been trying FOR 2 WEEKS to get my WoodBox meter working
From: Rick Tharrington
Sent: Saturday, September 17, 2011 1:22 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Setup For Woodbox Meter Running SDR 2.2.3 Flex 1500
Anybody got any screen shots on the setup of VCOM I have V ports set up I
believe ok. What I can NOT get to work
I just purchased a 1500. I set up a computer ...P-4 3.0 with 2 gb of
ram. The box has a New install of XP-home sp-3. the computer is dedicated to
the 1500 and power sdr only. no virus software, and only the web browser, to
down load files. I have a couple of questions.
1. keyboard
Hi-- I'm not a 1500 expert, but will try to give a quick answer on a
couple-- other experts will likely chime in when they have a chance
Q1- keyboard/mouse-- defer to others, just don't know
Q2 -- PowerSDR™ v2.0.20 RC2 is the most stable version for the 1500,
just reading the threads here
Looking for someone to walk me threw setting up flex 5000 and n1mm and cw
skimer to work all together.
Currently i have flex 5000 working with n1mm and all digital modes, also i have
cw skimmer working with flex 5000. I need to know how use both at the same
time. 73 thanks
N2XQM Rich
I use CWSkimmer with my FlexDDUtDXLabs Suiteor N1MM
A pair of VSPE virtual ports will connect CWSkimmer to your radio and
can export them to DXLabsuite's SpotCollector or N1MM bandmap.
Create the virtual port pair.
In DDUt assign one side of pair in the RCP tab, and CWSkimmer setup
Ports
What are the issues? I purchased and downloaded 4.10 this past week but
haven't set it up yet because I've been playing with v2.0.6 of PowerSDR.
Tim N9PUZ
On 7/30/2010 4:32 PM, David Beumer W0DHB wrote:
Preston
There are known issues with VAC 4.10 -- it is best to use 4.09, both can be
.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim N9PUZ
Sent: Saturday, July 31, 2010 12:01 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] setup for the 1500
What are the issues? I purchased and downloaded
Dale,
I'm not an authority. However, I did NOT install 2.06. Instead I installed
2.05 which is also available for download. This is because there is a
recognized bug in .06 that does not allow VAC transmitting. Since I am very
interested in PSK31 and SSTV modes, this meant that 2.06
, 2010 8:40 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] setup for the 1500
Dale,
I'm not an authority. However, I did NOT install 2.06. Instead I
installed 2.05 which is also available for download. This is because there
is a recognized bug in .06 that does not allow VAC
The 1500 arrives soon and I have a question or two. What will the install cd
have 2.0.6 or a earlier version? I plan to download 2.0.6 ,if that is not whats
included on the cd. good or bad idea? I gather from looking and reading 2.0.6
is a complete package ,no seperate installer or
Having no CD drive on the netbook I first tried using, I dowloaded from the
flex website. Its a complete install. I followed the instructions on the
errata sheet for XP.
73 - Mike WA8BXN
___
FlexRadio Systems Mailing List
I recommend loading 2.0.6 from the installer you download from the
website.
The radio will ship with firmware 0.4.1.2 installed.
This firmware will work fine with 2.0.6, except for one item.
If you want the transmit sidetone/monitor volume control to work, then
you will need to upgrade to radio
Dear Flexers,
For a little more than 2 weeks I've been the proud owner of a Flex-5000A
and so far have been testing it successfully in SSB and the digital
modes using HRD. However, it is my firm intention to use it in the
forthcoming CQWW in CW. But so far I've not been able to achieve the
Using Flex 5000a (vista 64)and com0com( 4-14).
Trying to get it to transmit on PSK. Receive. logging. and all extras
working fine but not transmitting. If I put it into tune mode it shows it is
transmitting take it out and go into macro ..nothing happens...could
someone tell me what settings
configured properly.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Leo Hoffmann
Sent: Thursday, November 12, 2009 6:02 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Setup 4 Ham Radio Deluxe
Using Flex 5000a
Ruediger
I do not use the N1MM logging program but I was having the same problem using
HRD / DM780.
Everything worked except CW - What I found out was that in DM780 I had to
select CW (KY CMD) instead of CW.
Hope this works for you.
Good luck in the contest
Don kd6hq
Leo
Because HRD has some latency when keying with CAT you may want to set up
an extra COM port and use the use the via serial port option of the
PTT setup in DM780 and enable PTT control on the CAT control tab of
PoweSDR.
Also, make sure you're CAT setup is correct in HRD as Tim had
Ruediger,
I am using N1MM Logger with my FLEX-5000A. I just packed up my F5K to take
to a hamfest this weekend where I will be having a booth for FlexRadio
Systems. Therefore, I will be going from memory on the PowerSDR settings.
First, I would urge you to uninstall N8VBcom and replace it with
Ruediger,
Oops! That should be the if it isn't broke, don't fix it theory.
73, Ray, K9DUR
http://k9dur.info
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Leo, you did not say whether you have installed VAC.
José F5JD
David Beumer W0DHB a écrit :
Leo
Because HRD has some latency when keying with CAT you may want to set
up an extra COM port and use the use the via serial port option of
the PTT setup in DM780 and enable PTT control on the CAT
Here are the steps I followed in setting up my Mac Book Pro to support the
Flex-5000A. I hope this is informational and if I can possibly be of
assistance, do not hesitate to contact me. It was really quite painless once
Mike suggested I download the newer 1394A firewire support for Windows.
Hi Ed:
On 6/6/06, Ed Popp [EMAIL PROTECTED] wrote:
Larry,
I'm sorry to hear that your having problems with the SDR-1000.
Lets try a couple of things and see if we can determine what or where the
problem is.
Sounds like there is some kind of power short. First I assume that you
don't
Hi,
I'm trying to set up Power Console in the Demo mode. It's in
another computer and the hardware is not connected. When I turn the
console on, I get an Port Audio Error message that says: Invalid
number of channels. Ver 1.6.0, set up for Demo mode, using
unsupported card..
73,
Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Charles Greene
Sent: Monday, April 03, 2006 11:10 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Setup for SDR-1000 demo
Hi,
I'm trying to set up Power Console in the Demo mode. It's in
another
10:51 AM
To: Mont O'Leary
Cc: Flexradio@flex-radio.biz
Subject: Re: [Flexradio] Setup Instructions for VAC
Read n4hy tutorial on the flex-radio website. It worked for me.
Richard W5SXD
Mont O'Leary [EMAIL PROTECTED] wrote:
(01/22/2006 14:32)
I am hoping to use VAC to make the connections
Read n4hy tutorial on the flex-radio website. It worked for me.
Richard W5SXD
Mont O'Leary [EMAIL PROTECTED] wrote:
(01/22/2006 14:32)
I am hoping to use VAC to make the connections required to run the various
digital modes as the last step in freeing myself from my Pro-II rice box.
I say hope
Hi,
I have VAC and VCOM installed and working well. I take it that it is
proper to turn VAC off in order to operate SSB from a mike. MixW CW
and all digital modes work well, and my external keyer works well in
parallel with keying CW with MixW from macros or from the
keyboard Now to
26, 2005 2:06 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Setup for beginner help results
Hi,
I have VAC and VCOM installed and working well. I take it that it is
proper to turn VAC off in order to operate SSB from a mike. MixW CW
and all digital modes work well, and my external
Will after many times checking and reloading,it works..sound is down on pc speakers but head phones are fine.still playing with it..Bob
While listening to a QSO. I opened Setup, Transmit tab and begun
manipulating the sliders of the equalizer. Reception became bad and I
was obliged to close the console and switch the rig off.
I could reproduce this anomaly. Has someone noted that ?
73 - José F5JD
Darn it. The mailer stripped my screen captures. I sent them to Ken.
Hopefully,
he can get them onto Friends.
Bob
Robert McGwier wrote:
I am listening to Don Imus and using tiny dsp and small audio
buffers. Here
are captures of my setup while I am listening right now. It is using
256
36 matches
Mail list logo
