A.R.S. - W5AMI escribió:
> Ignacio,
>
> Thanks for your comments. I am working on making the program more
> versatile, however it is slow going due to other irons in the fire I
> am faced with. I pulled the program temporarily from my website until
> I work out a few minor glitches. I am current
Ignacio,
Thanks for your comments. I am working on making the program more
versatile, however it is slow going due to other irons in the fire I
am faced with. I pulled the program temporarily from my website until
I work out a few minor glitches. I am currently working on com port
selection and
A.R.S. - W5AMI wrote:
> BTW, it's very important that the frequencies be entered in mHz right
> now. For instance, to scan 3885 to 3895 on the 80 meter band, be sure
> to enter 3.885 and 3.995, otherwise problems will occur on this beta.
> No commas, just decimals.
>
> Also, I would be very intere
BTW, it's very important that the frequencies be entered in mHz right
now. For instance, to scan 3885 to 3895 on the 80 meter band, be sure
to enter 3.885 and 3.995, otherwise problems will occur on this beta.
No commas, just decimals.
Also, I would be very interested to know why, at random, I ha
> 2) I have only tested timing issues on MY computer. I have only
> seldom seen some issues where VAC or PowerSDR goes into some
> "never-land" state where I can't read anything from the com port.
I said VAC, but meant VCOM (sorry Phil ;)
___
FlexRadio
Since there has been so much discussion for a way to scan with the
SDR, here is my feeble attempt with only about 4 hours of work and
testing at a simple scan program that will interface with PowerSDR as
a CAT program. I made the screen small and always on TOP so that you
will not lose focus, etc.
6 matches
Mail list logo
