Friends, went to T7 and VAC no longer working with 1500/Win 8.1. Worked
flawlessly for years with PSDR. Thoughts?
Bob K4RCG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/list
Thanks to all who previously responded to my earlier VAC receive concerns.
Today, I downloaded the trial 4.14 version and also
changed the Flex settings to MME rather than WDM-KS and the VAC setting
to cable format
rather than cable range. Seems to work much better regardless what
sample rate se
, K0KC
From: Douglas Hubbs
To: Gregory Gryckiewicz ; flexradio@flex-radio.biz
Sent: Saturday, December 27, 2014 11:15 AM
Subject: Re: [Flexradio] Vac Question
greg,
You may want to look into this software that I am using for my digital
programs. It requires VBCable A and B downloads to
Greg -
The quality of copy is not impacted by any of the functional (not trial)
virtual cable products. The only way to screw things up is to miss-match
the sampling rates. And Windows may try to screw you when you do a Windows
update. Windows likes 44.1kbs, and everything that we do uses even
mul
Tnx to all the replies. I definitely see almost perfect copy with VB-
Audio Cable.
I've only downloaded one cable for now to experiment with.
My concern was if I purchased the real copy of VAC, would it look just
as good as what I'm seeing
today with VB-Audio cable.
73, Greg
N2DYT
_
problems at all with them and FlexRadio
Software or FLDIGI.
http://www.kvraudio.com/product/vb-cable-by-vb-audio
73 and happy new year.
doug K4DMH
-Original Message-
From: Gregory Gryckiewicz
Sent: Dec 27, 2014 10:54 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Vac Question
Has
dio.com/product/vb-cable-by-vb-audio
> 73 and happy new year.
> doug K4DMH
>
>
> -Original Message-
> >From: Gregory Gryckiewicz
> >Sent: Dec 27, 2014 10:54 AM
> >To: flexradio@flex-radio.biz
> >Subject: [Flexradio] Vac Question
> >
> >Ha
-audio
73 and happy new year.
doug K4DMH
-Original Message-
>From: Gregory Gryckiewicz
>Sent: Dec 27, 2014 10:54 AM
>To: flexradio@flex-radio.biz
>Subject: [Flexradio] Vac Question
>
>Has anyone had any receive issues with the VAC trial version. I realize
>the tx int
Has anyone had any receive issues with the VAC trial version. I realize
the tx interjects a :"trial" in the transmission.
Being unfamiliar with PSK 31, and I know that is is not an error free mode,
yet I would think I would get a more error-free receive.
I belief my Flex 1500 and VAC settings are
e W0DHB
>
> -Original Message-
> From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
> Larry
> Loen
> Sent: Saturday, June 21, 2014 5:06 PM
> To: FlexRadio Reflector
> Subject: [Flexradio] VAC decides to force a few parameters and just like
> th
lf Of Larry
Loen
Sent: Saturday, June 21, 2014 5:06 PM
To: FlexRadio Reflector
Subject: [Flexradio] VAC decides to force a few parameters and just like
that, JT65 and JT9 stop working
I had taken a while to stumble through the instructions ofr getting JT65
and JT9 going. But, a couple weeks back,
Larry -
Sorry that I don't have the fix(es) off the top of my head. You have
several things going on, all are windows related (it think).
Start with the 19 clients that VAC has, most or all are ghost entries. I
would delete all of them and start over.
I know that JT65 uses numeric port entries,
I had taken a while to stumble through the instructions ofr getting JT65
and JT9 going. But, a couple weeks back, I had finally done so.
Yesterday, it stopped working. The reason seems to be, no matter what I
do, it has somehow "re-defaulted" everything and it won't let me change
anything, even
Now working on going remote and have much to learn. I have been able to set
up a basic VAC mode (installed Team Viewer) and it will now allow me to use
a portable laptop or my cell phone via the internet for listening to the
radio, but for some reason I only get audio in SSB mode. Although I can
c
e
> > receiver, not sending audio back to the Flex???
> >
> > Phil
> > G3UGK
> >
> > -Original Message-
> > From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
> > bill
> > Sent: 23 May 2014 00:18
> > To: Jeffrey
audio from the
> receiver, not sending audio back to the Flex???
>
> Phil
> G3UGK
>
> -Original Message-
> From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
> bill
> Sent: 23 May 2014 00:18
> To: Jeffrey Brown; flexradio@flex-radio.biz
&g
z] On Behalf Of bill
Sent: 23 May 2014 00:18
To: Jeffrey Brown; flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC audio driver
I use CWSkimmer with my 5K and I choose the WDM driver, and VAC cables 1 and
2.
Works a treat!
On 2014-05-21 1:03 PM, Jeffrey Brown wrote:
> Been working rec
I use CWSkimmer with my 5K and I choose the WDM driver, and VAC cables 1
and 2.
Works a treat!
On 2014-05-21 1:03 PM, Jeffrey Brown wrote:
Been working recently on improving my signal for digimodes. Been watching the
excellent videos by G7CNF on this and also proper mic setup. They're ver
y 2014 14:23
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Windows 7 & 8 have a habit of automagicly setting the wrong default devices.
You need to right click on the speaker icon, select playback devices, and
correct the defaults. In some conf
Been working recently on improving my signal for digimodes. Been watching the
excellent videos by G7CNF on this and also proper mic setup. They're very well
done. Years ago it was suggested that the best driver to select was Windows
WDM-KS. That's what I've always used. From the tab I can a
Been working recently on improving my signal for digimodes. Been watching the
excellent videos by G7CNF on this and also proper mic setup. They're very well
done. Years ago it was suggested that the best driver to select was Windows
WDM-KS. That's what I've always used. From the tab I can a
Thanks Paul - that did it.
Phil
G3UGK
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W
Paul Mills
Sent: 21 May 2014 14:23
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Windows 7 &am
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Windows 7 & 8 have a habit of automagicly setting the wrong default
devices. You need to right click on the speaker icon, select playback
devices, and correct the defaults. In some configurations, you may
find yourself having to do this over and over a
I've just upgraded from XP to W7 and now have a problem with VAC which I'm
using with my Flex 5000A, via DDUTIL, for Logger 32 and CW Skimmer. All
works well until I try to play sounds via another program - Windows Media
Player or YouTube for example - when I find that all audio is now routed to
V
lace that is easy to remember.
> Just one way to quickly set back up when needed.
>
> Don, kd6hq
>
> -Original Message----- From: Preston
> Sent: Saturday, March 29, 2014 3:29 PM
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] VAC line setup
>
>
> The article in
ston
Sent: Saturday, March 29, 2014 3:29 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] VAC line setup
The article in the URL in Marty's note is very good at explaining why and
how VAC needs to be matched up with PSDR. But am I right that there is an
error in it? It seems like only
The article in the URL in Marty's note is very good at explaining why and how
VAC needs to be matched up with PSDR. But am I right that there is an error in
it? It seems like only Line 1 is being set up (twice!). Am I reading this
wrong? I too find it confusing sometimes to remember to rever
Sorry , wasnt thinking straight .
Here is the link.
http://helpdesk.flexradio.com/hc/en-us/articles/202118418-Sample-Rate-Synchronization-between-VAC-and-Vista-Win7-Win8-Sound-Devices
73
Marty
W8AKS
On 3/27/2014 8:14 PM, Christopher Canevit wrote:
What was that article link since it wasn't in
Live and Learn. Next time, I'll check the community first.
Thanks Tim for the great article on adjusting the vac lines with psdr.
Thank you MS, may the bird fly up your nose.
73
Marty
W8AKS
On 3/27/2014 16:14, Marty Blluhm wrote:
Good Afternoon.
I have a problem ? with my vac lines.
The curr
Good Afternoon.
I have a problem ? with my vac lines.
The current format for Line 1 is as follows:
ExPCM/48000/16/2(3) with 2 Uflows
However Line 2 has the following format:
ExPCM/44100/16/2(3) with no Uflows
I have checked all my boxes to make sure that all levels were at 44100
including the
I also am putting together a new PC. My concern is also about downloading VAC
via my existing VAC subscription. Communicating with "him" has been as issue in
the past. Looking for info.
Bob k6dds
iPhone
___
FlexRadio Systems Mailing List
FlexRadio@fle
I do not have any issue with VAC 4.13. Your issue may be the way that
your cables are set up. There is a registry file that you can download
and use to define 7 VAC cablesfor VAC 4.13
http://support.flex-radio.com/Downloads.aspx?id=396
The reason for 7 cables is that if you have a 1500 and an
This happened to me too. I used 4.11 to avoid it.
> On Oct 21, 2013, at 10:25 AM, Ed Wilson wrote:
>
> Colleagues,
>
> Just a word of caution! I normally operate JT65 and JT9 using WSJT-X. I have
> used a Flex-5000 for most of these operations, but started using my new
> Flex-6700 last sum
Colleagues,
Just a word of caution! I normally operate JT65 and JT9 using WSJT-X. I have
used a Flex-5000 for most of these operations, but started using my new
Flex-6700 last summer. This requires an external (or additional internal) sound
card until DAX is available for the 6700. I had no pr
:20:03 -0400
> To: supp...@flex-radio.com
> CC: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] VAC 4.13 and Windows 8 -- device cannot be opened
>
> I think I found it. The nvidia video card drivers cd installed something
> called nvidia hd audio driver.
>
> I fina
I think I found it. The nvidia video card drivers cd installed something
called nvidia hd audio driver.
I finally got to thinking "Why would a video card need its own audio drivers?"
Regardless after uninstalling that after a week of head scratching it works now.
It was probably a confli
Has anyone had an issue getting VAC to work on Windows 8?
I have everything setup correctly, but when I go to start any sound card
program I get errors that the VAC cable device cannot be opened. The VAC
control panel even shows the PCM / rate and connection between Power SDR
and VAC talking.
___
VAC won't key your 1500 (or any radio) You'll need a serial port emulator to
do that. VSP Manager by K5FR is designed to do exactly what you need -
contact him directly for a free copy! Works like a champ here.
You really DON'T want to use MS Sound Mapper, either. Create a pair of VACs
for just th
Bill
Did you try a newer version as per Tim?
If so and its still not working, let me know, I will connect again!
73
Neal Campbell
Abroham Neal LLC
HUGE DAYTON CELEBRATION SALE!!
Time to get the guaranteed setup for your SDR!
Now until end-May
On Wed, May 8, 2013 at 7:15 AM, Tim Ellison wrote
Try usingan older version of WSJT. Looks like v9 isn't working very well.
Tim Ellison
On 5/7/2013 8:12 PM, Bill Tynan wrote:
Last week I posted a note saying that my VAC was not working.
Last evening I tried some different settings in the Power SDR Setup panel and
in the VAC Control Panel.
Wi
Last week I posted a note saying that my VAC was not working.
Last evening I tried some different settings in the Power SDR Setup panel and
in the VAC Control Panel.
With these changes, I was able to get JT-64 to transmit but no noise was noted
on the waterfall. As a test of VAC, I also tried l
Re-enumeration can be a problem. But you can get around this if you make
VAC the default recording and playback devices. MMTTY / Writelog requires
this as an example.
Keith
On 5/5/13 9:45 AM, "Steven Hess" wrote:
> Did your audio cables get re-enumerated by Windows?
> This happens.
>
> On
Did your audio cables get re-enumerated by Windows?
This happens.
On Sat, May 4, 2013 at 8:22 PM, Bill Tynan wrote:
> I hate to bring this up again as I have received help before for several
> Flex experts, but now I have a new computer built by a local, K0MHC
>
> He installed VAC 4.12
>
> Detai
I hate to bring this up again as I have received help before for several Flex
experts, but now I have a new computer built by a local, K0MHC
He installed VAC 4.12
Details:
Computer Win 7 64 Bit
CPU AMD Dx4 4.3 GHz
RAM 8 GB
Firewire TI
Power SDR 2.6.4
WSJT 9.3
I believe that everything is set t
;
> Thanks, guys!
>
> Lee K9WRU
> - Original Message - From: "Brian Lloyd"
> To: "Drax Felton"
> Cc: "FlexRadio reflector"
> Sent: Tuesday, April 30, 2013 8:52 AM
> Subject: Re: [Flexradio] VAC alternative?
>
>
>
> On Mon, Apr
ed so take your
time and do a good job!.
Thanks, guys!
Lee K9WRU
- Original Message -
From: "Brian Lloyd"
To: "Drax Felton"
Cc: "FlexRadio reflector"
Sent: Tuesday, April 30, 2013 8:52 AM
Subject: Re: [Flexradio] VAC alternative?
On Mon, Apr 2
On Mon, Apr 29, 2013 at 7:17 PM, Drax Felton wrote:
> Has anyone tried using JACK as an alternative to VAC?
>
>
>
> http://jackaudio.org/
Why don't you and then tell us about it?
--
Brian Lloyd, WB6RQN/J79BPL
706 Flightline Drive
Spring Branch, TX 78070
br...@lloyd.com
+1.916.877.5067 (USA)
_
Has anyone tried using JACK as an alternative to VAC?
http://jackaudio.org/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-arch
On Wed, Mar 13, 2013 at 10:40 PM, Bill Tynan
wrote:
> First let me say that I'm glad to be back on the Flex reflector. I got off
> some time ago when I was to away for a few weeks and wanted to reduce my
> e-mails. Then, I didn't get around to re-subscibing. Now, I have.
>
> A month or so ago, I h
First let me say that I'm glad to be back on the Flex reflector. I got off some
time ago when I was to away for a few weeks and wanted to reduce my e-mails.
Then, I didn't get around to re-subscibing. Now, I have.
A month or so ago, I had some kind of computer glitch which, among other
things,
Graham,
VAC also includes a utility called Audio Repeater which can be used to patch
the audio output from the radio to your PC soundcard. Last time I used it,
there was noticeable latency introduced, so it was useable for voice but not
for CW. Personally, I simply connect a stereo cable between
Folks I have had my 1500 for a while now and want to get "adventurous"... I am
going to buy VAC and have read a little on the subject but cannot work out if I
can also use VAC to send ordinary voice audio to the PC speakers rather than
plugging in a set at the flex box itself. The articles I ha
I'm still trying to get all my ducks in a row with my 1500 and various
digital programs like JT-65HF and Fldigi. It seems to me that with my
previous installation, I had preset the RX and TX gain levels in
PowerSDR based on info I got somewhere but I don't remember where. Are
there "defaults"
For KD4JRX,
When setting up VAC, it's important to remember:
You need TWO VAC's set up in the software control panel - one for transmit, one
for receive. These must match up with the appropriate input/output lines in
PowerSDR (Setup, Audio tab, VAC1).
VAC2 in PowerSDR is not used in the Flex 1
thanks...been having some crashes and wanted to make sure it wasn't VAC
related...
On Fri, Jan 4, 2013 at 12:39 PM, Brian Lloyd wrote:
> On Thu, Jan 3, 2013 at 7:40 PM, Robert Costa, KB6QXM >wrote:
>
> > Didn't 4.12 have streaming technology in the code and help with the
> reduce
> > dpc laten
On Thu, Jan 3, 2013 at 7:40 PM, Robert Costa, KB6QXM wrote:
> Didn't 4.12 have streaming technology in the code and help with the reduce
> dpc latency times and cpu utilization?
>
Maybe, but for anyone starting now, the correct choice is the current
version: 4.12. There is no down-side to running
uot;
Cc: "flexradio@flex-radio.biz"
Subject: [Flexradio] VAC choice
Date: Thu, Jan 3, 2013 6:27 pm
I haven't noticed any difference since 4.09!
73
Neal
Neal Campbell
Owner
Abroham Neal LLC
Work:+1 540 645 5394
Mobile: +1 540 645 8171
On Thu, Jan 3, 2013 at 9:25 PM, Thomas B
I haven't noticed any difference since 4.09!
73
Neal
Neal Campbell
Owner
Abroham Neal LLC
Work:+1 540 645 5394
Mobile: +1 540 645 8171
On Thu, Jan 3, 2013 at 9:25 PM, Thomas Bewick wrote:
> I am using the latest VAC and the latest PowerSDR on W7and it works fine.
> 73,
> Tom
> K2bew
>
>
I am using the latest VAC and the latest PowerSDR on W7and it works fine.
73,
Tom
K2bew
On 1/3/13, Steven Catani wrote:
> Can anyone suggest what is the best version of VAC to use with latest
> version of Power SDR
>
> 73
>
> KK4MIP
>
___
FlexRadio Sy
I'm running VAC 4.12 on WIn 8 64. No problems.
73, Rich - W3ZJ
Ian Wade G3NRW wrote:
I have just acquired a new PC that happens to have Windows 8 (64 bit)
installed. Does VAC work with this version of Windows?
--
73
Ian, G3NRW
___
FlexRadio Systems
___Original Message_
From: Tim Ellison
Date: Mon, 24 Dec 2012 Time: 07:35:05
VAC versions 4.10 and greater have a signed 64-bit kernel mode driver
that is fully compatible with all Windows 64-bit operating systems,
suchas Win8. I recommend the 4.12 ve
VAC versions 4.10 and greater have a signed 64-bit kernel mode driver
that is fully compatible with all Windows 64-bit operating systems,
suchas Win8. I recommend the 4.12 version I do not recommend the 4.10
version as it is known to have other issues.
Tim Ellison
On 12/24/2012 7:31 AM, Ian
Yup works fine !!
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ian
Wade G3NRW
Sent: Monday, December 24, 2012 7:31 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] VAC with Windows 8 (64 bit)?
I have just acquired a new PC that happens to
I have just acquired a new PC that happens to have Windows 8 (64 bit)
installed. Does VAC work with this version of Windows?
--
73
Ian, G3NRW
>
>
>
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radi
I got my first Flex radio in April and installed VAC 4.12 on Win 7 64
bit, never had the previous version of VAC. I have since upgraded to
Window 8 64 bit. VAC works as advertised.
73, Rich - W3ZJ
Jeff - G4IUA wrote:
I have a clean install of Windows 8 64 bit, PSDR 2.5.3, and want to
reinstal
@flex-radio.biz
Subject: [Flexradio] VAC version
I have a clean install of Windows 8 64 bit, PSDR 2.5.3, and want to
reinstall VAC. I have VAC v4.09 - is that still the best version to use or
are there advantages in updating to the current version 4.12? I see that
version 4.09 was released back in
I have a clean install of Windows 8 64 bit, PSDR 2.5.3, and want to
reinstall VAC. I have VAC v4.09 - is that still the best version to use or
are there advantages in updating to the current version 4.12? I see that
version 4.09 was released back in June 2008, and 4.12 in April this year.
However
ber 15, 2012 14:10
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] VAC
>
> I could use some help getting the VAC to work. I'm receiving fine through
> it, but no luck transmitting. I might need someone to talk me through some
> of the settings (perhaps on the phone
On Sat, Dec 15, 2012 at 2:10 PM, wrote:
> I could use some help getting the VAC to work. I'm receiving fine through
> it, but no luck transmitting. I might need someone to talk me through some
> of the settings (perhaps on the phone). Please reply to my email address
> _jonweiner@aol.com_ (mailt
I could use some help getting the VAC to work. I'm receiving fine through
it, but no luck transmitting. I might need someone to talk me through some
of the settings (perhaps on the phone). Please reply to my email address
_jonweiner@aol.com_ (mailto:jonwei...@aol.com) and not through the ref
On Tue, Nov 20, 2012 at 4:48 AM, Steve Potter
wrote:
> I probably should have read earlier posts, as I assumed HRD to be
> referring to DM780, where if dual VAC were possible i.e. on RX1 and RX2 in
> MultiRX then you would have two independant audio sources for psk/sstv/rtty
> etc where they fall
Could you not send VFO A audio on the Left Channel VFO B audio on the
right channel (more of a question than a statement) and then manage those
in VAC?
Again, that would take the some work in the VAC bridge.
Worth exploring.
Mike va3mw
On Tue, Nov 20, 2012 at 7:48 AM, Steve Potter
wrote:
> I
From: FlexRadio [flexradio-boun...@flex-radio.biz] on behalf of Michael Walker
[va...@portcredit.net]
Sent: 20 November 2012 12:41
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC 1 and 2
Why not use the VAC repeater and split the audio. That is what it is there
for
c: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] VAC 1 and 2
>
> Guy -
>
> Sorry, but no. You need a 5000 with the second receiver to use the second
> VAC.
>
> 73
>
> Ken AC0HO
>
> On Mon, Nov 19, 2012 at 1:05 PM, Guy WR7K wrote:
>
> > Can I use
] on behalf of Ken Akin
[kena...@gmail.com]
Sent: 19 November 2012 19:07
To: Guy WR7K
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC 1 and 2
Guy -
Sorry, but no. You need a 5000 with the second receiver to use the second
VAC.
73
Ken AC0HO
On Mon, Nov 19, 2012 at 1:05 PM, Guy WR7K
Guy -
Sorry, but no. You need a 5000 with the second receiver to use the second
VAC.
73
Ken AC0HO
On Mon, Nov 19, 2012 at 1:05 PM, Guy WR7K wrote:
> Can I use both of the VAC? One setup for JT65 HF and the other for HRD.
> I do not have the second receiver and VAC 2 is grayed out.
>
Can I use both of the VAC? One setup for JT65 HF and the other for HRD. I do
not have the second receiver and VAC 2 is grayed out.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-ra
Thanks for replies. Glad to hear that the VAC ver. 4.12 is good to go. Now I
still need to upgrade PowerSDR
Jeff
Ham Radio--The Original Social Network
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
I just restored a hard drive failure and lost everything. I now have
everything back on a SSD. Before I purchase the latest version of VAC, I
just wanted to ask if all works okay with it. I know I've seen some messages
in the past that it didn't play well.
Thanks es 73
Ken - WD8CCZ
___
Sent: Wednesday, October 31, 2012 12:06 PM
To: Flex reflector
Subject: [Flexradio] VAC 4.12
Just curious...anyone using the latest version of VAC. I used the 4.9
version a long time because 4.10 was buggy with the Flex. I upgraded to
4.11 since the consensus of the group was that it was
I've been using 4.12 for several months with no problems.
Dave
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Jeffrey Brown
Sent: Wednesday, October 31, 2012 12:06 PM
To: Flex reflector
Subject: [Flexradio] VAC 4.12
Just curious...anyone
Just curious...anyone using the latest version of VAC. I used the 4.9 version
a long time because 4.10 was buggy with the Flex. I upgraded to 4.11 since the
consensus of the group was that it was fully functional. No problems here.
Now that 4.12 is out I haven't heard anything on it. Maybe
In previous versions of PowerSDR, the VAC Buffer latency was, as is the
current default of 120 ms in PowerSDR v2.4.4
The advantage is that some timing sensitive digital modes (like TOR
modes) *may* benefit from using WDM-KS and a lower buffer latency value.
Tim Ellison
On 9/16/2012 12:54 PM,
Ed Wilson wrote:
> As I understand it, the latency adjustment applies only to VAC and I do
> not use VAC for CW, so a low value would improve CW performance. A low
> overall latency (not just VAC) does improve CW operation, however. I can
> see how low VAC latency would enhance (or make possible)
Colleagues,
PowerSDR 2.4.4 includes a VAC Buffer Latency adjustment with a default value of
120 ms and, according to the install notes, a possibility of reducing this to 0
ms with a sufficiently fast computer.
In trying to troubleshoot some issues here with the digital modes that utilize
VAC (
@flex-radio.biz
Subject: [Flexradio] VAC not available in SSB modes?
I read this post and need to know if VAC is no longer available in SSB modes
in PowerSDR 2.4.4.
Those of us who run SSTV and on the 60 meter channels where both data and
voice are allowed need to have access to VAC while in the SSB
Carol
I suspect that the checkbox in setup-Audio-VAC1 is set to automatically turn
onVAC for digital modes, which means it will not automatically turn on for SSB.
There are several ways to correct this:
1. Check the "Enable VAC" checkbox in the same window and VAC will always be on
2. Manually c
I read this post and need to know if VAC is no longer available in SSB
modes in PowerSDR 2.4.4.
Those of us who run SSTV and on the 60 meter channels where both data and
voice are allowed need to have access to VAC while in the SSB mode.
Carol, KP4MD
Rich - W3ZJ rich at w3zj.com
Wed Sep 5 09:10:
Tim,
Does this apply to the frequency offset issue I noted on RX2? Is there
anything in the works for that?
--
Doc
Bill Dailey
KXØO
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Thanks Ed, you are right, 4.11 it is! Morrice
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base
:47 AM
Subject: [Flexradio] vac licence
Hi all, does anyone know how to transfer vac 2.11 licence to a new owner?
Regards Morrice M5ADZ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Hi all, does anyone know how to transfer vac 2.11 licence to a new owner?
Regards Morrice M5ADZ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-arc
: supp...@flex-radio.com; Flex-radio Reflector
Sent: Thursday, May 3, 2012 8:31 AM
Subject: Re: [Flexradio] VAC 4.15 Available Re: OK to use VAC 4.12?
Hi Dudley,
Yes, I now see that 4.12 is the latest version. Eugene was kind enough
to look up my original purchase and send me the information
Hi Dudley,
Yes, I now see that 4.12 is the latest version. Eugene was kind enough
to look up my original purchase and send me the information again. There
are some honest people still left out there!! I'm going to upgrade VAC
today. I've been having a ball with JT65-HF and my FLEX-5000A. I mov
Thank you.
73... Jon
On 5/2/2012 12:55 PM, Robert Costa wrote:
Jon,
I just went onto his site and I only see 4.12 as the latest. Am I
missing something?
*From:* Jon Maguire
*To:* flexradio@flex-radio.biz
*Sent:* Wednesday, May 2, 2012 9:39 AM
*Subject:* [Flexradio] VAC 4.15 Available Re:
I had sent an email to Eugene to get a copy of my registration
information because of a move to a new laptop (another story) and I see
that VAC is up to version 4.15
73... Jon W1MNK
On 4/10/2012 11:28 PM, jhu...@austin.rr.com wrote:
Zack,
As far as I know 4.12 has not been fully tested at Fl
The max number of VAC cable you can use on one PC for PowerSDR is 6.
FLEX-5000 +RX2 can use 4 cables.
You can run a FLEX-1500 at the same time for 2 more cables.
Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 5
Hi,
What is the go with the VAC registry file for Windows? And why 6 VAC cables
for PowerSDR?
I've obviously missed some discussion around this.
Regards,
Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mai
I have been running Power SDR 2.3.5 for over a week and all seemed fine.
However, I have been reading on the Reflector about VAC 4.11 and have wondered
if I should attempt to update to it. incidentally, I am using a Dell with Cor
Duo processor and running XP. I intend to keep on running XP as lo
LatencMon is reporting audio under-runs as is VAC control panel. I am
getting occasional audio distortion. Stopping PowerSDR and restarting
it cures the audio distortion
The reports are in the images at the URLs as is VAC configuration and
PowerSDR audio configuration.
Flex-3000
PowerSDR v2.3.5
VA
1 - 100 of 598 matches
Mail list logo
